0
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister

Stens New Spindle Assembly 285-923 Compatibil cu Toro 4200, 5000, 4216, 4235, 4260 și 5060 TimeCutter, Exmark Quest Zero-Turn Cositoare 117-0751, 117-7267, 117-7267, 917-7267, 917-7267, 917-7267 51

Brand:Stens

3.6/5

L
384.90

**Verificați că piesa se potrivește înainte de cumpărare**Specificații:Descriere: Ansamblu axInclude piuliță fulie Înălțime: 5 1/2OD: 6 1/4Înlocuiește numerele OEM:Exmark: 117-7268, 117-7439, 121-0751Toro: 11075-117, 117-7439 7267, 117-7268, 117-7439, 121-0751Compatibil cu/Înlocuire pentru: Exmark: mașini de tuns iarba Quest Toro: 4200, 5000, 4216, 4235, 4260 și 5060 TimeCutter

Cantitate
Adaugă in coşCumpără acum

EAN: 0023899439140

Categorii Automotive, Piese de schimb, Transmisie și transmisie, Buclee,

Piesele marca Stens au încredere de către dealerii profesioniști pentru a efectua reparații de calitate OEM. Numele Stens este prezentat pe toate ambalajele produselor Stens autentice. Garanția Stens de 1 an asigură fiabilitate și performanță pentru fiecare piesă. Suntem încrezători că produsele noastre vor funcționa impecabil, dar în cazuri rare în care nu funcționează, le vom înlocui oricând în decurs de un an de la comanda dumneavoastră. Compatibil cu/Înlocuire pentru: Exmark: mașini de tuns tuns zero Quest, Toro: 4200, 5000, 4216, 4235, 4260 și 5060 TimeCutter. Înlocuiește numerele OEM: Exmark: 117-7268, 117-7439, 121-0751, Toro: 117-0751, 117-7267, 117-7268, 117-7439, 121-0751. Specificații: Descriere: Ansamblu ax, Include piuliță scripete, Înălțime: 5 1/2, OD: 6 1/4.
Brand Stens
Color Multi
Country of Origin China
Customer Reviews 4.6 4.6 out of 5 stars 146 ratings 4.6 out of 5 stars
Drive System External Hex
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 6.25 x 6.25 x 3.04 inches
Item model number 285-923
Item Weight 2.75 Pounds
Manufacturer Stens
Product Dimensions 6.25 x 6.25 x 3.04 inches
Size Pack of 1

3.6

10 Review
5 Star
77
4 Star
10
3 Star
8
2 Star
3
1 Star
3

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Greg from Dallas
5 stars for sure
These are from the exact manufacturer as the factory spindles. Only difference is the Toro stamped on the spindle. Surprised that the noise was greatly reduced from new spindles. The original ones spun easily and seemed to work fine. I bought new spindles because I thought I bent one. I don’t think I bent it but it did require a shim to level the blades due to bent deck. The new spindles are a generic version of what the Toro factory sells. Toro sells the same unit but they stamp their brand on it. These spindles are NOT tapped for the bolts. The new hardware is made tap threads into the aluminum boss.
Scritto da: GRUBDIGGER
It's great!
Just like the oem but a lot better priced.
Scritto da: nate
Worked great.
Worked great for Toro SS 4260. Don’t forget to grease the bolt before you install it.
Scritto da: J. Schaule
I may have gotten a bad one, but it was really tight
Not a fun part to replace, given that I had to angle grind the old bolt off the pulley. After installation it really bogged the mower down. I bought a (much more expensive !) one at the local Weingartz and used the spindle bolt off of this one (the one that cost 3x more didn't come with one (DOH!) so I didn't return it. It may be worth it for the bolt alone...
Scritto da: Moot2753
Varying quality.
The media could not be loaded. I ordered 3 of these and received 2 very different products. One had pre tapped holes, with a much cleaner cast and bearings spun really nice, but the other 2 were sloppy, spun a fraction as well as the first and just had smooth holes that you had to self tap. I installed all 3 and will update on all durability.
Scritto da: fluffy
Direct replacement
Direct replacement for the spindles on a TORO ss5000. Take it easy tightening the bolts. I used a 1/2" impact and snapped one head off. Don't matter though 3 bolts is plenty for these. Or don't be like me and use an impact gun
Scritto da: Cliff from Clifton
... vendor a few years ago and it still works like it's brand new
Got my first one from this vendor a few years ago and it still works like it's brand new. The 2nd originaly pully blew 2 years ago and went back for a 2nd one from this vendor; same qualtiy, same performance, great price! Highly recomment this part for the 42" Toro ZTR.
Scritto da: Amazon Customer
Good product
Seems heavier than the original. Comes with its own screws looks and feels well made running for a month now no issues. Time will tell about how long it will last. Definitely buy again
Scritto da: kim turriff
Very good replacement
Very good replacement, be careful putting the bolts on they are not threaded.
Scritto da: Amazon Customer
Perfect
Fits just like OEM.

Produse asemanatoare

hot
Stens New Spindle Assembly 285-923 Compatibil cu Toro 4200, 5000, 4216, 4235, 4260 și 5060 TimeCutter, Exmark Quest Zero-Turn Cositoare 117-0751, 117-7267, 117-7267, 917-7267, 917-7267, 917-7267 51
3.6/5

L 384.90

Stens New Spindle Assembly 285-923 Compatibil cu Toro 4200, 5000, 4216, 4235, 4260 și 5060 TimeCutter, Exmark Quest Zero-Turn Cositoare 117-0751, 117-7267, 117-7267, 917-7267, 917-7267, 917-7267 51
3.6/5

L 384.90

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array

Total:L 0.00

Vezi căruciorulVerifică

Categorii

Toate categoriile
Meniul Categorii Aproape Cart

Menu