StarTech.com Adaptor USB C la SATA - Conector hard disk extern pentru unități SATA de 2,5 inchi - Cablu SATA SSD / HDD la USB C (USB31CSAT3CB) Negru USB C

Name: StarTech.com Adaptor USB C la SATA - Conector hard disk extern pentru unități SATA de 2,5 inchi - Cablu SATA SSD / HDD la USB C (USB31CSAT3CB) Negru USB C
Brand: StarTech
SKU: 4923113120112
Price: 275.06 RON
Availability: InStock

Brand:StarTech

3.7/5

L
275.06

Profitați de portul USB-C™ de pe cel mai recent MacBook, Chromebook Pixel™ sau alt laptop pentru a obține acces rapid la unitatea dvs. externă. Acest adaptor tip cablu vă permite să utilizați portul USB Type-C™ pentru a vă conecta laptopul direct la o unitate SSD de 2,5 sau un hard disk și pentru a-l accesa prin USB 3.1 Gen. 2 ultra-rapid (10 Gbps). Este rapid și ușor să vă conectați la unitățile dvs. SATA, fără a fi necesare accesorii suplimentare. Puteți accesa rapid datele dvs. valoroase, oriunde ați merge, folosind acest adaptor tip cablu. Este alimentat prin USB, deci nu este necesar un adaptor extern și are un design compact și ușor, pe care îl puteți pune cu ușurință în geanta de laptop sau în husa de transport. Cablul adaptor vă permite să schimbați rapid HDD-urile sau SSD-urile fără a fi nevoie să instalați unitățile într-o carcasă. . Puteți copia sau prelua rapid date de pe un SSD sau HDD 2.5. Vă oferă acces ușor la unitatea dvs. pentru migrarea datelor, clonarea unităților și aplicațiile de backup a datelor, cu performanța rapidă a USB 3.1 Gen 2. Conectorul USB Type-C integrat și ușor de utilizat este mic și reversibil, ceea ce face ca inserții mai ușoare. Puteți conecta mufa cu ambele părți în sus, ceea ce înseamnă mai puțin risc de a vă deteriora porturile și mai puțină frustrare. USB 3.1 Gen 2 vă oferă o lățime de bandă și o viteză mai mari cu rate de transfer de fișiere de până la 10 Gbps - de două ori viteza USB 3.0 (USB 3.1 Gen 1) tehnologie. Vă permite să profitați de performanța înaltă a celor mai recente SSD-uri și hard disk-uri, atenuând în același timp blocajele în transferurile de date. Notă: Acest produs nu este compatibil cu hard disk-urile de 3,5 inchi. Pentru suport pentru unități de 3,5 inchi, consultați cablul nostru USB-C la SATA cu alimentare suplimentară (USB31CSAT3CB). USB31CSAT3CB este susținut de o garanție StarTech de 2 ani și asistență tehnică gratuită pe viață.

Cantitate

Adaugă in coş Cumpără acum

EAN: 4923113120112

Categorii Electronică, Computere și accesorii, Accesorii pentru computere, Cabluri și interconectări, Cabluri SATA,

PERFORMANȚĂ DE MARE VITEZĂ: Acest cablu SATA la USB-C vă permite să valorificați viteza USB 3.1 Gen 2 cu rate de transfer de până la 10 Gbps. ACCES CONVENENT LA DISCOARE: Schimbați rapid HDD-urile sau SSD-urile fără a fi nevoie să vă instalați unitățile într-o carcasă cu acest adaptor USB de tip C la SATA. Oferă acces la unitatea dvs. pentru transferuri de date, clonarea unităților și aplicații de backup a datelor. IDEAL PENTRU CĂLĂTORIE: Acest adaptor SATA SSD / HDD are o amprentă mică și un design ușor, potrivindu-se perfect în carcasa dvs. de transport. Acest conector compact pentru hard disk extern oferă portabilitate maximă, făcându-l însoțitorul perfect de călătorie. ALIMENTARE USB: Accesați cu ușurință datele dumneavoastră valoroase folosind acest adaptor pentru hard disk pentru laptop, fără a fi nevoie de alimentare externă. ACCES LA ALIMENTARE EXTERNĂ: Acest adaptor USB C la SATA vă permite să accesați rapid SSD-ul sau HDD-ul SATA de 2,5 inchi fără a fi necesare accesorii suplimentare.

Brand	StarTech
Cable Type	USB
Compatible Devices	Laptop, Solid State Drive, Personal Computer, Hard Drive, Chromebook
Connector Type	Sata/Usb
Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	USB31CSAT3CB
Manufacturer	StarTech.com
Product Dimensions	20 x 1.7 x 0.2 inches; 1.03 Ounces
Special Feature	Compact

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Lutz

Thanks for the instructions!

Ordinarily I wouldn't write a review for a cable, unless I wanted to warn people away from a bad product. But I'm making an exception this time because I really appreciate the instructions that were included. I didn't know that a drive wouldn't necessarily show up in Windows and I wouldn't have known what the problem was. The included instructions cleared things up for me, so I just wanted to give a big thumbs up for that.

Scritto da: Derrick Walker

Plug & Play as advertised

I took my 2TB Seagate Fire Cuda SATA HDD out of my Asus TUF Gaming FX504 and it worked immediately. All I did was attach the cable and it found all partitions with ease no additional setup required. The Asus Tuf FX504 ran like the wind but poorly constructed. After 18 month the monitor went and then it started freezing and overheating. Even the casing cracked during travel. But this cable saved the day and got me back to work. My new MSI computer didn’t come with an internal 2.5 bay along with the NVMe slot.

Scritto da: Amazon Customer

All you need for small SATA drives

I tested this against many other devices and this has the fastest transfer speeds. It only works for drives that don’t need extra power, so your 3.5” drive from your desktop PC would need an externally powered solution. It works reliably. This has never caused an error. I have left it to copy to and from drives on a file level or a block level for hours or days and in that time it never had trouble. The transfer would complete successfully every time!

Scritto da: jeff a

It works every time for me

Bought this to clone new ssds for each of my computers and it worked as advertised. I used free macrium reflect each time and it took a while to clone with usb but when installed the worked as they should with no problems.

Scritto da: Wayne C

Worked perfectly

Used it to clone an original HDD to a new SSD. windows recognized the new drive immediately on the USB port, and the cloning process was fine.

Scritto da: aj4mq

Great for external SATA 2.5" drives... but

having worked with computers since the era of 5¼ floppies, I am used to pushing technology to many edges. This is a simple device to use for almost anyone.. fits in drive nicely, recognized by windows 7 and up easily. Remember to connect to drive, put drive gently on non-conductive surface, then plug into computer/laptop. Use Windows Eject, then remove as gracefull. give older drives at least a minute to spin down to prevent damage. The only problem I ran into was during imaging, this appears to overheat and slow from it's nearly 2.5Gb transfer, and suffering until it cools down again. If you plan to image drives, use a powered dock instead.

Scritto da: Mustafa

Prefect and it’s work with any other devices

This product is prefect and I was able to connected my hard drive to the computer!

Scritto da: Anthony T.

Good quality and plugs in great

This is a sturdy and high quality cable. Plugs into my laptop well and plugs into the SSD perfectly and does not wobble or have any connectivity issues. I used this to format multiple SSDs for the PS3. Highly recommend this and its a great price.

Scritto da: Ollie S.

Works flawlessly with Raspberry Pi 4

Works as expected on the USB3.0 ports on the Raspberry Pi 4, for both extending the filesystem as well as booting (OK, so right now the /boot partition needs to stay on the SD card but everything else can do on an external SSD/HDD). Bought 4 of these for my Raspberry Pi Kubernetes Cluster. The only criticism I would have of it is that it's more expensive than other options, however having tried cheaper alternatives (such as Sabrent) this is the only one that the Raspberry Pi 4 seems happy to boot off of.

Scritto da: Eliot

Easy To Use - Plus TRIM + S.M.A.R.T For Relevant Drives

Not much to say, here, it does what it says on the tin, and unlike some others (KabelDirekt "Pro Series" - B01G3V5ZH2) has the full ability to be the main cable in an operating system running from a USB drive. This is because (and I can confirm) it has the ability to operate fully using TRIM and S.M.A.R.T. functionality on a connected drive. TRIM is something which is good for both security (to a small degree) and somewhat prolonging the lifespan of the drive in operating systems which support it. As it ensures that the right space is available when needed for storage, and keeps the drive's 'blocks' in order, accordingly, within that. That isn't a perfect description, I know, but then, I'm not perfect. ;-) S.M.A.R.T. is potentially *much* more important, as it allows you to ably ensure the health of a connected drive. Without it I wouldn't have had a clue that my main OS drive was dying, recently!

Scritto da: Phaedrus

TRIM works with Linux but only with a bit of fiddling

This is great and good value for the price. Worth noting that this version has no connector for an external power supply so it is only for SSDs and 2.5" HDDs. This does support passing TRIM/UNMAP through to SSDs; I ran Startech's firmware update tool before testing but it's quite possible the unit already shipped with the up-to-date firmware (the tool doesn't give any info about what it's done or what the previous version was.) Getting TRIM to actually work on Linux though was a bit of a fiddle though - even using kernel 5.3.x I had to manually set 'provisioning_mode' to 'unmap' in /sys (you can set it with udev as well - googling for those terms should find the appropriate info.) This is likely to be a problem with Linux not the device though - Windows was quite happy to issue TRIMs without any fiddling or extra drivers.

Scritto da: dprees

Really useful, especially for a Raspberry Pi SSD drive

Update Nov 2018 I've been using a couple of these at home, and found them very useful and versatile. Perfect for connecting SSDs to a PC for formatting, etc., and work extremely well in combination with cheap 32Gb SATA SSDs with Raspberry Pi 3B and 3B+ computers. They will also power 2.5 SATA hard drives, should you wish to use them. I'm a teacher, and recently acquired for my classroom a complete set of Raspberry Pi 3Bs. I use 20+ of these cables with 32Gb SSDs to provide the working environment for my pupils. These cables *just work*, and make the task of getting the pupils up and running at the start of each lesson really easy. Top recommendation. Great piece of kit. There may be cheaper alternatives on Amazon, but I'm sticking with these for the next classroom I fit out. ---- Purchased to allow the connection of a cheap 30Gb SSD to a Raspberry Pi 3B, to act as the OS drive for an experimental server. Worked flawlessly, and even can work with a 500Gb 2.5" SATA drive I had kicking around -- powered from the Pi, which in turn was powered by a USB to microUSB cable from a monitor! This, plus a cheap SSD make the Pi an excellent and reliable tool -- I cannot rely on microSD cards for longevity, and USB flash drives, though an acceptable substitute, are not as good as an SSD and one of these cables. Highly recommended.

Scritto da: Joe King

Yet to find a drive it actually works with.. Limited to 2TB in 2018!!

Bought this in January 2018. I have tried it with multiple drives and it has yet to work. Something I didn't notice until now was that hidden in the tech spec is that this thing is only able to work with drives up to 2TB. It's 2018! Its USB3.1! But maxes out at 2TB! Well that probably explains why it doesn't work. It's literally useless as everything I have is over 2TB. One more thing.. tried to leave a review on StarTech's own website and no matter what computer or browser I use - the review won't save. Was wondering why products so many products had no reviews or good ones only. Very disappointing and if StarTech likes their customers then they should contact me.