Încălzitor de tavan cu un singur bec în infraroșu Broan-NuTone 162, 1, alb

Name: Încălzitor de tavan cu un singur bec în infraroșu Broan-NuTone 162, 1, alb
Brand: Broan-NuTone
SKU: 094701188082
Price: 655.13 RON
Availability: InStock

Brand:Broan-NuTone

3.6/5

L
655.13

5 x 1-1/8 Fălci de menghină moale din aluminiu cu magneți ~ Construite dintr-un aliaj de aluminiu întărit, cu doi magneți permanenți circulari încorporați pe partea din spate, care țin piesa de prelucrat în siguranță pe menghină. ~ Proiectat pentru a proteja atât fălcile menghinei, cât și piesa de prelucrat de deteriorare și deformare în timpul oricărei aplicații de prindere. ~ Canelurile asigură prinderea strânsă a diferitelor forme de piese de prelucrat. ~ Designul din aliaj de aluminiu include caneluri drepte pentru a compensa denivelările piesei de prelucrat. ~ Vândut la pereche.

Cantitate

Adaugă in coş Cumpără acum

EAN: 094701188082

Categorii Uneli și îmbunătățiri pentru casă, Furnituri pentru construcții, HVAC, Încălzitoare și accesorii,

Un bec Încălzitor și ventilator. Grilă albă atractivă. 70 CFM și 3,5-Sones. INSTALARE Ușoară: Carcasă robustă din oțel, console de montare reglabile cu fante pentru gaura cheii, motor cu ungere permanent și conector cu 4 conducte rotunde cu manșoane conice fac instalarea logică și simplă. DISCRET: Unitatea de tip IC (Contact de izolație) este instalată în tavan, astfel încât toate, cu excepția becurilor și a grilajului alb, să apară în camera dvs. pentru un aspect curat și coeziv. EFICIENT: Ventilatorul funcționează la 70 CFM și 4,0 Soni pentru o performanță silențioasă de înaltă calitate. EFICIENT ENERGETIC: Se încălzește folosind un bec cu infraroșu R40 sau BR40 de 250 W (nu este inclus). COMBINATĂ DE ÎNCĂLZIRE ȘI VENTILATOR DE ÎNALTĂ CALITATE: Combinația de încălzire și ventilator oferă confort instantaneu băii dvs. fără a ridica termostatul central pentru o căldură care economisește bani.

Air Flow Capacity	‎70 Cubic Feet Per Minute
Assembled Height	‎0.88 inches
Assembled Length	‎10.25 inches
Assembled Width	‎10.25 inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Broan-NuTone
Brand	‎Broan-NuTone
Burner type	‎Radiant
Color	White
Color	‎White
Country of Origin	China
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 627 ratings 4.5 out of 5 stars
Department	Home & Garden
Finish types	‎White
Heat Output	‎250 Watts
Heating Method	Radiant
Heating Method	‎Radiant
Included Components	‎No Other Items Included
Is Discontinued By Manufacturer	No
Is Discontinued By Manufacturer	‎No
Item model number	162
Item model number	‎162
Item Package Quantity	‎1
Item Weight	‎7 Pounds
Manufacturer	Broan
Manufacturer	‎Broan
Material	‎Plastic
Part Number	‎162
Power Source	AC
Power Source	‎AC
Product Dimensions	10.25 x 10.25 x 0.88 inches; 7 Pounds
Product Dimensions	‎10.25 x 10.25 x 0.88 inches
Product Dimensions	‎10.25"D x 10.25"W x 0.88"H
Room Type	‎Bathroom
Special Feature	HeaterHeater
Special Feature	‎HeaterHeater
Special Features	‎HeaterHeater
Style	‎With Fan
Switch Installation Type	‎Ceiling Mount
Type of Bulb	‎Infrared
Voltage	‎120 Volts
Wattage	‎300 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Joseph

Love it

I always liked the heat lamps in hotel bathrooms, so I thought I would try one in my house. I love this thing, it makes the bathroom far more comfortable on cold mornings. The fan seems to work well and is not very loud. I installed a timer switch with my heat lamp for safety's sake. You will need to spend some time in your attic to install this, which can be pretty awful on a hot day, especially if you have fiberglass blown insulation in your attic. Some basic knowledge of electrical will be necessary to safely install this. I was able to install mine without hiring an electrician or HVAC worker, but it would have been a lot easier if I had just paid someone else to work in my miserable attic.

Scritto da: Living Up North

Exact replacement.

M wife refused to turn on the fan when she showers so the orginal exhaust fan got rusty. This was an exact replacement. I was able to get the old fan out of the hole in the wallboard and get the new on installed thru the hole by putting it thru the hole in pieces. Works fine now. Put a sign on the show that say FAN as a reminder to her.

Scritto da: JimE

It was 20 years ago today, Sgt Pepper taught the Band to Play...

Ya I remember it like it was yesterday! Crawling threw that dirty attic to be pinched in a corner cutting holes and running wires. I was really not looking forward to it being 20 years older and less agile. Then I saw a review stating you could just replace the fan! Could this be true? I had the Nutone Fan. And sure enough, perfect fit !!! just unscrewed 2 bolts and an AC Plug. Genius! What a lifesaver! Took me longer to clean off the dirt and a quick spray paint on the old box then to install the fan itself. Actually after I was done I cleaned up the old fan, oiled it up and the dam thing worked again! lol

Scritto da: Larry McGee III

Love the Modular Design

I bought this just to extract the fan-motor assembly to replace the dead one in my existing unit. I originally had the Broan model 9417DN-R02 bought from Home Depot and it lasted for 10 years until the fan stopped working last year. I had been dragging to replace the whole thing because where it is installed is difficult to access to take out the whole housing. Then I found out the the fan-motor assembly is actually easily user replaceable. It is mounted in the metal housing by just two screw on a metal bracket. It is connected to the unit's circuitry by a small regular 2-prong plug. See photos. Take out the two screws and disconnect the plug and it's out. Easy. The hardest part is to loosen the one screw that is located more to the inside of the housing, because you don't have a lot of space there and you have to be careful not to strip the screw. I found out that the model162 (the sticker inside says 162-M), is basically the same as the 9417DN-R02 that I had and the part number for the fan-motor assembly for both models are the same. Funny thing is that everywhere I look, the actual assembly part itself costs a lot more than the whole unit. So I just buy the whole thing and extract the part from it.

Scritto da: ALF Engineer

Solid Bathroom fixture

I purchased this to replace a single non-IC(Insulation Contact) heat lamp fixture in my second floor bath. Since the bathroom has a window, the fan isn't required. I wanted just a heat lamp but one that was rated as IC. I considered a true heater instead of the heat lamp but decided that wasn't worth the issues of potentially changing the electrical circuit. We've had these infra-red lamps in both our bathrooms for years and they are just enough to take the chill off. Unfortunately I couldn't find a unit with a single lamp rated IC. Broan / Nutone have IC units with dual lights but their single light offering with no fan is non-IC. I decided to get this IC model with a fan. Nutone has an identical model 9417DN. I've seen both and they appear identical. I was installing as a remodel from the attic above. It would have been nice for a drywall cut template to assist. The only issue I had with the installation was the cover for the electrical box that uses a sheet metal screw to attach. Once the unit is in place the ceiling joists make this a blind fit from above. Where mine was located I had to use a small socket set to screw it tight. Since this is very unlikely to be a maintenance item, I guess it's a don't care that it's hard once...but either a top screw, a tool less clip or electrical access from the bottom would have been a much better solution for me. If you are installing in new construction and the drywall isn't in place yet you won't even notice this...until you have to replace the unit 20 years later! The ducting went smoothly and the fan is reasonably quiet and the heat lamp works well. I have about 10 feet of 4" ducting to a flush mount wall louver. The fan has enough oomph to open the louvers when on. Ventilation is good. For the price I'm happy

Scritto da: Suzanne Kwan

Quality product with multiple functionality. Two thumbs up!

Installed the fan/light/heat lamp over 2 years ago and it still works like a charm. This is a must have for all bathrooms. Not only does it ventilate the humidity out when taking hot showers/baths, it lights up the room and keeps you warm when you come out during not so warm weather so you don't have to turn on your heater. Installation was easy. Just need an opening big enough to house the unit and it sits in place with springs if I remember correctly. I chose to use a transparent heat lamp bulb vs the traditional red heat lamp bulb, which I think is easier on the eyes, no need to transition from dim red lighting back to normal lighting. Only comment is that the fan is a bit noisy. Otherwise I would have given it 5 stars.

Scritto da: Doug

Good purchase

Good product. Easy installation, straightforward instructions.

Scritto da: kyle stanlick

Impressed

It’s perfect really easy to install but only time will tell if the motor is strong enough to pull the moisture

Scritto da: GK

Make sure you have attic acccess

Excellent product. Timely delivery. Works perfectly.

Scritto da: Scott Currie

Easy Install

Had the same unit previously and it last over 10 years. Easy to install.