Greenlee 904H-18 EXTENSIE BIT pentru scule electrice, lungime de 18 inchi, tija de 7/16 inci, negru

Name: Greenlee 904H-18 EXTENSIE BIT pentru scule electrice, lungime de 18 inchi, tija de 7/16 inci, negru
Brand: Greenlee
SKU: 0783310353560
Price: 562.03 RON
Availability: InStock

Brand:Greenlee

2.9/5

L
562.03

EXTENSIUNEA DESCRIEREA PRODUSULUI, BIT (7/16 X 18) DE LA PRODUCĂTOR Greenlee are o evoluție puternică de mai bine de 145 de ani și continuă să fie marca preferată de instrumente și echipamente pentru antreprenorul electric. De la confecţionarea găurilor şi îndoirea până la testare şi măsurare, vă puteţi baza pe instrumentele Greenlee pentru a rezista şi a depăşi concurenţa de fiecare dată. Extensia de biți Greenlee 904H-18 este destinată utilizării cu arbore pentru ferăstrău cu gaură, biți de cazmă, biți Nail Eater II, biți pentru electricieni și biți pentru trepte. De asemenea, este folosit pentru foraj mai adânc în lemn.

Cantitate

Adaugă in coş Cumpără acum

EAN: 0783310353560

Categorii Uneli și îmbunătățiri pentru casă, Unelte electrice și de mână, Piese și accesorii pentru scule electrice, Piese și accesorii pentru burghie electrice, Prelungiri pentru burghie,

Utilizați pentru foraj mai adânc în lemn. Greutate pachet: 1,175 lbs. Țara de origine: China. Dimensiuni pachet:45,72 Cm L X3,175 Cm L X3,175 Cm H. Tip produs:Unelte.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Greenlee
Color	‎Black
Country of Origin	‎China
Customer Reviews	3.9 3.9 out of 5 stars 18 ratings 3.9 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Tools & Accessories
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8 x 8 x 8 inches
Item model number	‎904H-18
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Greenlee
Material	Metal
Material	‎Metal
Part Number	‎904H-18
Product Dimensions	‎8 x 8 x 8 inches
Shank Type	Round With Flats
Size	‎18-Inch Length, 7/16-Inch Shank
Tool Flute Type	Straight
Warranty Description	‎1 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: robosolo

Set screw hole failure

I used this drill extension for less than 1-hour. The set screw loosened up and when I tightened it, the threads partially stripped in the metal of the extension. I could no longer tighten up the set screw to hold the bit. I called and spoke with a tech at Greenlee regarding the stripped out threads on the extension. He seemed to think it was a manufacturing defect and said that I could return it for a replacement. The defect was allegedly due to a too deep countersink done to the set screw hole during manufacturing. I believe that the problem is only partially the fault of the countersinking done to the set screw hole. It removes almost an entire thread and there are very few of these threads to begin with in the 5/16" - 24 tpi hole. They should have used slightly thicker metal in the extension receiver to provide sufficient depth for the set screw treads. So, this is what I did instead of returning the extension (which I needed to use today): I removed the set screw and slid my 7/16" hex shank bits (I have several) into the end of the extension. Then I marked each bit shank with a felt tipped pen just where the set screw normally tightens down. I then drilled a depression in each bit shank. Now the set screw can go deep enough to grab most of the threads. It seems to be working so far. I'll keep my fingers crossed.

Scritto da: North

These worked great no breaking

I bought three of these and hooked them together with a 16" 1 3/8" bit on the end to drill hole for a gas line through an 8x8 post 6' long. If you have ever done this than you know the biggest worry is you get half way through and the adapter breaks or comes unhooks from the others. You lose you bit your adapter and you can't drill in that hole any more because of all the metal stuck in the hole. These worked great no breaking, striping, no problem.

Scritto da: SHANNON M LAKE

Horrible Design

The item pictured shows TWO set screws. The 24” model for a 7/16 bit I received only had one set screw that does not seat flush with the extender. I needed holes drilled down the center of 6x6 posts for running the electrical wires in the gazebo I am building. Against my better judgement, due to being in a time frame crunch, I used the extender. Now I have a $55 drill bit lost in a $150 red cedar 6x6 on the first post it was used. Yep, this sucker just hit the trash bin.

Scritto da: Mary S

Great super bit.

My husband really liked the very long extension bit for refinishing our deck. It especially made the unscrewing the old screws easy--without bent over on the knees.

Scritto da: Tee

Five Stars

Granddaughter was excited with her birthday gift. Thank you for the expediency in delivery.

Scritto da: R. J. Clark

Reach out and touch something

It's not every day that you need a 24 inch bit extension for your electric drill, but when you do need one, there's no substitute for a good, well made one. This Greenlee extension is well made and got the job done.

Scritto da: Judy Bear

Works great!!

Had hard time finding this! Just what I've been looking for. Works great!!!!!

Scritto da: Amazon Customer

Five Stars

great tool price

Scritto da: metric123

Good.

Like all Greenlee products, top quality, top price.