CURT 55774 Conectori cu 7 pini, 4 pini pe partea de vehicul cu ieșire duală, pachet de remorcare din fabrică și priză USCAR necesare, negru

Brand:‎CURT

3.5/5

L
358.57

Un conector de cablare personalizat CURT (numit uneori conector T) este un dispozitiv electric simplu, plug-and-play, care elimină nevoia de tăiere, îmbinare și lipire la instalarea cablajului de la vehicul la remorcă. Majoritatea vehiculelor nu vin gata de tractare. Cu excepția cazului în care vehiculul dvs. are un pachet de remorcare, probabil că acesta nu este echipat cu un conector pentru cablarea remorcii. Aici intră în joc conectorii de cablare personalizat de la CURT. Un conector de cablare personalizat folosește un singur ștecher de echipament original pentru a fi conectat la o priză specială furnizată de vehiculul dumneavoastră. Deși această opțiune nu este disponibilă pentru fiecare vehicul, unii producători de automobile își proiectează vehiculele astfel încât să fie echipate cu ușurință pentru remorcare, furnizând o priză, integrată în sistemul electric al vehiculului, pentru a accepta cu ușurință un conector de cablare personalizat. Cu un conector de cablare personalizat CURT, nu este nevoie să accesați ansamblul farului spate, deoarece este deja prevăzută o priză specială. Acest conector special de cablare personalizat oferă de fapt două prize de conector pentru o opțiune multifuncțională. Se conectează la un conector OEM și oferă un conector plat cu 4 căi și un conector cu lamă RV cu 7 căi. Vine cu un suport de montare pentru o instalare ușoară și este conceput pentru a fi o opțiune de cablare personalizată pentru o varietate de vehicule (consultați informațiile despre aplicație pentru a verifica potrivirea). Conectorii de cablare personalizat CURT sunt proiectați pentru a fi de lungă durată și simplu de instalat. Vin cu huse de praf pentru a vă menține conectorul curat atunci când nu sunt utilizați.

Suportul metalic fixează cablurile pe vehicul sau cârligul de remorcă. CONSTRUCȚIE DURABILĂ. Pentru o utilizare de lungă durată și o conexiune fiabilă, carcasa acestei prize duble de cablare a remorcii cu 7 pini și 4 pini este fabricată din plastic negru durabil, care nu va rugini sau coroda niciodată. SPECIFICA USCAR. Această priză cablaj de remorcă este proiectată pentru anumite vehicule cu o priză USCAR standard în industrie. CONEXIUNE FIABĂ. Aceste prize pentru cablarea remorcii sunt gata să fie conectate la cablajul vehiculului existent, folosind priza USCAR din fabrică. Acestea conectează stopurile, luminile de frână, semnalizatoarele, luminile de marșarier, frânele electrice ale remorcii și puterea auxiliară. REZISTENT LA VREME. Această priză bidirecțională de cablare a remorcii este proiectată pentru a rezista la expunerea la vreme. Priza cu 7 pini are un capac de praf cu arc care menține punctele de conectare uscate și protejate atunci când nu este utilizat. DESIGN VERSATIL. Acest conector cu dublă ieșire este un upgrade excelent pentru o varietate de vehicule cu priză USCAR. Oferă două prize standard de cablare a remorcii, o priză plată cu 4 căi și o priză rotundă cu lamă RV cu 7 căi, permițând opțiuni versatile de remorcare. Tip de potrivire: Fit universal.
Brand ‎CURT
Country of Origin ‎Taiwan
Customer Reviews 4.4 4.4 out of 5 stars 2,557 ratings 4.4 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎55774
Item Weight ‎1.13 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55774
Model ‎Custom Wiring
OEM Part Number ‎55774
Product Dimensions ‎9 x 4 x 2 inches

3.5

13 Review
5 Star
73
4 Star
12
3 Star
6
2 Star
2
1 Star
6

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Robert j Hayes
works
does what it's supposed to do
Scritto da: Jeanette Pio
very easy to install
easy to install and now I hook to different trailers without an adapter
Scritto da: james b
Packaging was destroyed and taped up
Product had previously been open. Don’t know if anything was missing
Scritto da: ajburns12
Was not plug and play
I ordered this for my 2000 Ford F-250 Super Duty at the same time as I ordered a Reese hitch for it. My truck originally only had the 4 way plug, so my thought was with this I’d be able to keep the 4 way and then also gain the functionality of a 7 way as well. Both products came in the same day so I went to mount the bracket for this on the Reese hitch prior to installing on the truck and immediately noticed you only get 4 screws total, when there’s spots for 6 (2 to mount the bracket on the hitch or vehicle, and 4 to mount the plug to the bracket). So I used 2 for the bracket and then 2 on the plug. Not world ending but it would have been nice to receive 6 so we didn’t have empty slots. From there a friend and I went to install the hitch on the truck. After mounting the hitch I went to find the USCAR plug for this harness and it was nowhere to be found, even though this harness said it fit my truck. Maybe my truck doesn’t have a factory tow package, it’s 20 years old and I bought it about a year ago so I’m unaware of what all it originally came equipped with from the factory. However, my truck did not have the USCAR plug. It did have the 7 wires needed to wire this system into place though. I just had to cut the plug off of this and then use butt connectors to install it into the trucks wiring. After that it works fine, but it turned a 30 second plug and play job into about 30-45 minutes of trying to find a wiring diagram and having to match things on my own. Not the end of the world because I was able to get it to work, however this is not what I thought I was getting. At the end of the day I’m giving this an overall rating of 4 stars because it is made well, but they short you 2 screws and also didn’t fit my truck as advertised. I would have rated 3 stars, but I’m going to say the fitment issue is probably my own doing since I don’t know if I have the factory tow package or not.
Scritto da: David
It fit
Replace the broken one on my truck
Scritto da: Ryan konkle
Very easy to install and works awesome
Very easy to install and works awesome
Scritto da: Brett f.
Easy to install and it works great.
I like the fact that you just plug in to the factory trailer wiring harness which literally took me about a minute to do and then you can simply just mount it in an appropriate place Using a drill and some sheet metal screws and if you already previously had a similar type of unitinstalled you can literally pull out the old screws and put it right in and the whole thing takes about 5 minutes assuming the old screws aren't rusted.
Scritto da: paul w juneau
Easy Peezy
2010 Ford F-150. Person I bought truck from had backed into a post and mangled the trailer connector and bracket, see pics. After using dremel tool to remove old bracket, the new bracket supplied in the kit fits perfectly using self tapping screws. The new plug simply plugged into the factory connector, and tested 100%. Well worth the money.
Scritto da: Curtis
Does not fit!
This is NOT a direct fit for a 2004 ford super duty as advertised. This was a part that the Amazon algorithm picked for my specific vehicle. I guess buyer beware! It said that item was plug and go, but now I will spend hours modifying it to fit. I will avoid this brand from now on! UPDATE “Curt manufacturing” responded to an email of my fitment issues with no concern, no assistance offered, and basically told me it was my fault, and that they don’t even have a plug to fit the original equipment on my truck. They know it’s not plug and go and advertised as such anyway.
Scritto da: Amazon Customer
Plug and Play
Easy to plug in and install. Works like it should!
Scritto da: Blair Fraser
The leads for the four wire plug in are a bit short. About 4 inches longer would have been perfect.
The leads for the four wire plug in are a bit short. About 4 inches longer would have been perfect.
Scritto da: Trevor Macintosh
Worked for me
Wasn’t plug and play for my truck, with a little splicing I made it work. Still was a cheap alternative for my Tacoma
Scritto da: Gav
Works as intended!
I don't tow, but I purchased this to replace my new trucks regular 7 pin connector since it didn't come with a 4 pin connector. It plugged right into my 2004 Chevy Silverado 5.3L ZR1 trucks factory harness. Checked compatibility through etrailer.com which is also how I found this harness. Installed the bracket right into the bumper with self tappers, tied it all up, installed my tailgate LED strip and works just fine. Would definitely recommend.

Produse asemanatoare

hot
Priză RV Designer P720
0.1/5

L 140.62

Priză RV Designer P720
0.1/5

L 140.62

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array