BIG RED AT37912 Suport rotativ pentru motor din oțel Torin cu cap rotativ la 360 de grade și cadru pliabil: capacitate de 3/4 tone (1.500 lb), suport roșu pentru motor 3/4 tone (1.500 lb)

Name: BIG RED AT37912 Suport rotativ pentru motor din oțel Torin cu cap rotativ la 360 de grade și cadru pliabil: capacitate de 3/4 tone (1.500 lb), suport roșu pentru motor 3/4 tone (1.500 lb)
Brand: ‎BIG RED
SKU: 0615268268910
Price: 2444.63 RON
Availability: InStock

Brand:‎BIG RED

3.3/5

L
2444.63

Opere de artă pentru grădina dvs., terasă sau curte. Steagul de grădină cu două fețe realizat din două bucăți de țesătură din poliester. Acest steag de grădină cu 2 straturi este rezistent la apă și la intemperii. Va rezista la vant, ploaie si zapada. Faceți-vă declarația personală în decorul exterior cu acest steag de grădină colorat de calitate.

Nu există unități disponibile

EAN: 0615268268910

Categorii Automotive, Uneli și echipamente, Garaj și magazin, Încărcătoare de vehicule, Palane și cricuri, Plante și suporturi pentru motoare,

Mecanismul de pliere rapidă permite economisirea spațiului atunci când nu este utilizat în timpul depozitării în garaj sau atelier. Suportul motorului are o capacitate de încărcare de 3/4 tone (1.500 lb) și este echipat cu (2) roți fixe și (3) roți pivotante la 360 de grade pentru o manevrabilitate lină. Capul de montare are (4) brațe reglabile și rotație de 360 de grade, permițând accesul ușor la orice parte a motorului; Ține în siguranță majoritatea blocurilor motoare străine și autohtone. Suportul rotativ al motorului este construit din oțel rezistent, oferind durabilitate pe termen lung cu un luciu industrial; O bază extra-largă oferă stabilitate maximă.

Brand	‎BIG RED
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 151 ratings 4.3 out of 5 stars
Item model number	‎AT37912
Item Weight	‎84.7 pounds
Manufacturer	‎Torin
Manufacturer Part Number	‎AT37912
Model	‎Torin BIG RED Steel Rotating Engine Stand with 360 Degree Rotating Head and Folding Frame: 3/4 Ton
Product Dimensions	‎8.26 x 7.28 x 10.62 inches
Special Features	‎Locking engine tools, Engine stand 2000 lbs, Rotating engine stand

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Blair Weiss

Works and decent price

I was thrilled at the stiffness of this stand. I didn't know what to expect, so I expected the worst and was pleasantly surprised. I like the folding legs, so when I am not using it, it will take up less space.

Scritto da: Fern

Nice and sturdy

Held my L.S. Engine no problem

Scritto da: roger

worked great

I had to make different standoffs for the tractor engine that I was working on, but it worked great for an engine stand.

Scritto da: thomas sims

Sturdy

This engine stand holds a completely built diesel engine from a medium duty truck. Stand has little to no flex when rolling engine around the garage. I do have a jack stand under the front of motor just for reassurance.

Scritto da: Question Everything

A bit pricey for what it is an where its made.

I got this for an engine I just acquired, it was easy to assemble with simple tools very heavy material, once assembled it was very easy to roll as to my other stand the quality of welds are very good fit an finish aren't all that for the price it fits together fine a little loose an wondering how this will age with lots of use down the road. The actual finish has a lot to be desired, paint was missing an flaking off most of the assembled areas giving the welds look good they are rough an personally thing for the price more smoothing of the edges an jointed areas. Would I recommend, YES! Would I buy it again, Yes, but for the price I'd expected better fit an finish. Personally I think it should be $125. Less in price.

Scritto da: Sandy

used with a BBC 454 CID mark IV

had my BBC 454 mounted for about two months while I replaced seals and did general refurb. need two people to rotate engine upside down safely, but the stand was stable and had no sag whatsoever after two months of being mounted. It is a bit tricky to transition the engine to and from the stand with a standard engine lift. need to turn the engine stand at an angle to get the right alignment. overall very happy with product.

Scritto da: RetiredEngineer

Operational engine stand exceeds my expectations

It was packaged and delivered with one problem. It was too damn heavy. LOL It was not too hard to assemble. I wished the pin to keep it from rotating with engine mounted was long enough to go through the entire barrel. It would make me feel safer. My F150 302 ci engine went on with no major issues. It folds up very easy to store in the corner of the garage.

Scritto da: B.Alvarez

I would have rated it higher but my stand had 1 HUGE manufacturing defect.

It’s a decent stand for the price, but they need to fine tune their quality control. The shorter steel arm that the casters attach to wasn’t completely drilled through. It had two holes drilled on one side, but the holes were missing from the opposite side for the bolt to pass through. Most mechanics should have the tools to fix this, but it's not something you should be expected to.