uxcell a16060100ux0466 20 buc. Distanțiere izolate PCB cu montare inversată, înălțime de susținere 12,9 mm (pachet de 20)

Brand:uxcell

3.5/5

L
192.93

Pentru a fixa PCB-ul fără unelte, ușor de instalat și descărcat anti-erodare, izolație bună cu durată lungă de viață. Potrivite în mod ideal pentru ambalarea și stivuirea PCB, aceste noi distanțiere/suporturi vin în șapte stiluri populare. Folosite pentru cerințele de la placă la placă și de la șasiu la bord, acestea sunt disponibile atât în ​​versiuni cu montare prin împingere, cât și cu montare cu șurub. Distanțierele/suporturile sunt disponibile într-o gamă largă de înălțimi de distanță și vor satisface aproape orice nevoie de ambalare PCB.

Grosimea maximă a PCB: 1,8 mm/0,07 (H). Înălțime de susținere: 12,9 mm/0,5 (H); Se potrivește cu diametrul găurii PCB: 4 mm/0,15;. Culoare principală: Alb; Dimensiune totală: 20 x 20 x 23 mm/0,78x0,78x0,9(L*W*H). Greutate neta: 25g; Conținutul pachetului: 20 buc x distanțiere PCB izolate. Tara de fabricatie: CHINA; Material: plastic.
Country of Origin China
Is Discontinued By Manufacturer No
Item model number a16060100ux0466
Manufacturer uxcell
Product Dimensions 20 x 20 x 22.99 inches; 0.01 Ounces

3.5

13 Review
5 Star
70
4 Star
15
3 Star
10
2 Star
3
1 Star
2

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Jared
These things are huge! DON'T BUY FOR ARCADE FIGHTSTICK PCBs!
These things are huge! Don't make the same mistake I did. Don't blame the seller.
Scritto da: p4killer
Pin size a little too big. Adhesive pad also large.
These did not fit any of 6 different pcbs i had all of which were chinease small devices from amazon, relays, power converters etc. After i very slightly drilled the holes out they fit fine. But the standoff that are offset if space matters as these will expand your footprint significantly.
Scritto da: L E R
Most fine.
Seems like it's made okay, but should note that these do NOT work on the Raspberry Pi. They are far too large.
Scritto da: Michael
Great for small circuit board mounting.
Worked well for quick mounting of small circuit boards.
Scritto da: Charles E Snyder II
Good selection for what I needed.
Shipped quickly and product arrived exactly as described. Snap into the boards easily and also release quickly when needed. I will definitely restock with this exact item when the time comes to order more.
Scritto da: Madhoo Patil
Good.
Nice product for work.
Scritto da: bryan lamoreaux
works wonderfully
exactly what i needed. size is a bit too big for a raspberry pi, but nothing a drill cant handle.
Scritto da: justin
Exactly what I was looking for.
Awesome product very sturdy just wish the glue was stronger.
Scritto da: jonny
Does what it says on the tin
The adhesive isn't as good as I thought as it came off quite easily. Overall good value for money.
Scritto da: Kriss
Too big
Way too big in diameter, not remotely close to the common diameter I found on any PCB and used by other spacers. I couldn’t use them in the end, and I really have no idea if I ever will.
Scritto da: Alberto Pavan
standard per cs
facile da montare, componente standard: grazie. Ovviamente dipende dalla dimensione del foro in cui dovete inserirlo: nella scheda dollytek con ta2024 passa solo in 2 fori, che sono della dimensione giusta. In un altro l'ho tagliato.
Scritto da: Massimo
prodotto arrivato semi-schiacciato
prodotto funzionante ma arrivato semi-schiacciato, ma stranamente funzionante. Grande limite non fornire la versione "corta" della staffa per case compatti!
Scritto da: Cosalio
Ottimo
Ottimo

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array