Turf Traction 20x8.00-8 Ansamblu anvelope spate de schimb pentru mașinile de tuns iarba John Deere, set de 2 2 pachete - ANVELOPE/ROȚĂ

Name: Turf Traction 20x8.00-8 Ansamblu anvelope spate de schimb pentru mașinile de tuns iarba John Deere, set de 2 2 pachete - ANVELOPE/ROȚĂ
Brand: MARASTAR
SKU: 0817035020497
Price: 3049.48 RON
Availability: InStock

Brand:MARASTAR

3.8/5

L
3049.48

Ansamblul anvelopei din spate și roților Marastar Turf Traction 20x8.00-8 umplut cu aer (pneumatic) este înlocuitorul perfect dacă aveți nevoie de tracțiune suplimentară pentru mașinile de tuns iarba John Deere cu anvelope din spate 20x8.00-8 (verificați anvelopele existente pentru toate măsurătorile) pentru a asigura o potrivire adecvată a înlocuirii). Dacă sunteți în căutarea unei soluții de tracțiune, înlocuiți pur și simplu ansamblul original de anvelopă și roată cu acest nou ansamblu complet. Nu este nevoie să vizitați un magazin de anvelope. Înlocuitorul Marastar, ușor de instalat, vine cu o anvelopă fără cameră cu 4 straturi, care utilizează atât banda de rulare TurfMaster pentru stabilitate, cât și banda de rulare Turf Lug pentru o tracțiune superioară, premontată pe o roată galbenă de oțel acoperită cu pulbere, cu o lungime a butucului decalată de 3,50, alezaj 3/4 cu 3/16 canal de cheie. Înlocuirea anvelopelor este simplă, aceasta este soluția practică pentru anvelope și roți pentru mașinile de tuns iarba John Deere cu anvelope spate 20x8.00-8. Poate înlocui și o anvelopă 20x10.00-8

Nu există unități disponibile

EAN: 0817035020497

Categorii Patio, gazon și grădină, Unelte electrice pentru exterior, Piese de schimb și accesorii, Piese de schimb și accesorii pentru mașini de tuns iarba, Înlocuire pentru cositoare de gazon Parts,

Două anvelope incluse - dreapta și stânga. Soluție pentru anvelope și roți cu costuri reduse, pentru o tracțiune superioară, o alternativă excelentă la utilizarea lanțurilor. Utilizare: înlocuire pentru anvelopele mașinii de tuns iarbă din spate 20x8.00-8 și 20x10.00-8 (verificați Peretele anvelopei). Capacitate de încărcare/viteză: 965 lbs/nu pentru viteze pe autostradă. Roată: oțel galben solid, butuc decalat de 3,5, alezaj 3/4 cu canal de cheie 3/16 - verificați anvelopa existentă pentru măsurători pentru a asigura o potrivire corespunzătoare a înlocuirii. Anvelopă: 20x8.00-8 Tubeless Pneumatic 4 straturi. Anvelopa Turf Traction utilizează 2 benzi de rulare de calitate profesională: TurfMaster și Turf Lug; TurfMaster Tread on Tire Shoulder oferă stabilitate și tracțiune; Turf Lug oferă o tracțiune superioară pe teren și condiții dificile, inclusiv zăpadă.

Brand	MARASTAR
Brand	‎MARASTAR
Construction	‎N
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 464 ratings 4.7 out of 5 stars
Item Dimensions LxWxH	20.1 x 20.1 x 9.5 inches
Item Dimensions LxWxH	‎20.1 x 20.1 x 9.5 inches
Item model number	‎20808-PK
Item Weight	46.82 Pounds
Item Weight	‎46.8 pounds
Item Weight	‎46.82 Pounds
Load Capacity	965 Pounds
Load Capacity	‎965 Pounds
Manufacturer	‎Marastar
Manufacturer Part Number	‎20808-PK
Maximum Pressure	22 Pound per Square Inch
Maximum Pressure	‎22 Pound per Square Inch
Model	‎Turf Traction
Ply Rating	4-Ply
Ply Rating	‎4-Ply
Product Dimensions	‎20.1 x 20.1 x 9.5 inches
Seasons	Year Round
Seasons	‎Year Round
Size	20x8.00-8
Size	‎20x8.00-8
Special Features	‎- Two tire & wheel assemblies included - right and left;, - Use: replacement for rear mower tires 20x8.00-8

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Harold

Super quality

Good quality, delivery, packaging,etc, very satisfied.

Scritto da: Gerald Evans

Simple remove and replace

Absolutely one of the easiest and simple upgrades I’ve ever done. Pulling both old rear tires off and putting on the new ones couldn’t have taken 10 total minutes.

Scritto da: Joshua

Fit perfect absolutely no problems!

Went right on without any problems

Scritto da: Jl

Its all about traction and power my friend.

Power is boss with power you need traction problem is you mow not dig it.

Scritto da: Rick D. Huff

Great tires and wheels

Put them on this week. Installation was a snap. All you need is a heat gun, a screw driver, some grease, and a pair of needle nose pliers. Exact replacements but with more beef. The tires have a more aggressive tread design so be careful on wet lawns.

Scritto da: Rick Richardson

Great tires for not having chains

These tires came inflated and ready to go. They fit my John Deere D140 perfectly. I had recently purchased a snow plow for my John Deere and these tires gave me the traction needed to plow the driveway. Of course on ice they will slip and it is best practice to push the snow down the driveway and not up. I am really pleased with the quality and the job they do during the winter months in Colorado at 7300 feet.

Scritto da: Grandpa Wilbur

Climb steep hills with these bad boys!

I have some drainage ditches on two boundaries of our residential property. The standard turf tires on my mower will not always climb out of the ditch easily, especially when the ground is wet from the summer rainy season. I needed something with more aggressive tread. I was searching for bar tread that is commonly used on farm tractors when I found these tires ready-mounted on wheels that match my OEM wheels. I am very happy with how the tires perform. In the photo, you can see tracks cut by the tires but those are on the weedy surface of the undeveloped lot adjacent us. In the healthy turf on my side of the property line, the tires simply dig in and climb, without scarring the surface at all. Regardless of what these tires do to the ground surface, I do not get stuck in this ditch. Occasionally I have had to pull my mower out of this ditch with a come-along-winch when I got stuck with standard turf tires. Installation of the wheels/tires was pretty simple. My mower is almost new so the old wheels slid right off after the retainers were removed. I have taken wheels off of old fixer-upper mowers that was quite a chore though. Over time, rust might have seized the wheel to the axle on an old mower. I suggest applying a thin coat anti-seize compound to the axle when reassembling. In event that you want to switch back to your old wheels someday, or you need to repair a tire, this will ensure that it comes off easily the next time. When you get your new wheels and tires installed, you may need to readjust your deck level and height. The wheels were the same size as my OEM wheels but the deep treaded tires are a bit taller and wider on the outside measurement. (See photo of the OEM tire and the new tire side by side.) How to instructions, for adjusting your mower deck, are available on YouTube or from your local mower dealer. I encourage buying the tires already mounted on wheels. Having said that, these are priced so high from some Amazon sellers that I would not buy them ready-mounted. I received a pretty good sale price on this set. I have changed out tires on riding mowers before. I will only say that it is not a job for anybody without access to professional tire changing tools except maybe for a pretty resourceful DIYer.

Scritto da: Vince

Perfect fit for my John Deer!

Love the balance they provide to my mower.

Scritto da: dROCKer

Tires are soo worth it

I bought these because I was struggling to find decent chains for the factory turf tires. As you can see they are way beefier then stock. They give triple traction compared to factory. I have only used them on snow and ice. Snow great traction and snow removal from tires. Ice.. well they try and only slip 1/3 the time as turf tires. I was using them on a john deere with front 44" snowblower. Factory tire would spin and get stuck every 5 feet. Same path on these make it 60ft. NOTE: if ordering chains must go up a size, i just built my own. The design pattern is what you want for a dual purpose tire. Overall with install being soo simple, and they seem to be a quality tire. I am satisfied and would recommend. Mounted on 2020 john deere e120.

Scritto da: Thunderwing

Perfect for mowing steep hills.

Bought as a replacement for my LX172 20x10-8. They are the same width even though old size was marked as 10 inch. Best tread pattern for steep hill mowing. I filled them with biodegradable beet juice for added stability.

Scritto da: chris

Quality

Very well made. Matched my d125 wheel setup. I didn't end up using as the lugs would rip up my soft turf and I have no inclines to climb.

Scritto da: John Rowe

Better than stock

These tires fit my John Deere 135 lawn tractor. They have a herring bone tread combined with the regular turf tread. With the original stock tires I would frequently get stuck on slippery hills or in wet areas. These tires have eliminated that problem. Worth the money

Scritto da: Pedro

Un pneu robuste doté d’une excellente traction

Pour remplacer les pneus d’origines de mon tracteur jardin husqvarna faible en traction Excellent rapport qualité prix