Tub de scurgere reglabil Seachoice Splashwell, se potrivește cu deschidere de 1-1/4 inch, plastic alb

Brand:SEACHOICE

3.4/5

L
136.12

Tubul de scurgere reglabil Seachoice Splashwell este ideal pentru utilizarea în carcasa pentru motor, livewell sau baitwell a bărcii dumneavoastră. Fabricat din plastic alb durabil, care nu va rugini sau putrezește. Tubul se ajustează pentru a se potrivi pereților de la 2 la 4-1/2 inci. Seachoice se angajează să furnizeze accesorii marine de calitate și piese de schimb OEM pentru a satisface pasionații de pescuit, navigație cu barca și sporturi nautice din întreaga lume. Seachoice este administrat pentru și de către navigatori, oferind o gamă largă de produse, rămânând în același timp accesibil.

Nu există unități disponibile
Numărul piesei producătorului 50-19131. Folosiți dop de scurgere de 1 inch pentru a închide deschiderea. Se potrivește cu deschidere de 1-1/4 inch. Se ajustează pentru a se potrivi pereților de la 2 inchi la 4-1/2 inci. Plasticul alb durabil nu va rugini sau putrezește. Ideal pentru a fi utilizat în puțul pentru motor, puțul de viață sau puțul de momeală al bărcii dvs.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SEACHOICE
Color White
Color ‎White
Country of Origin ‎Taiwan
Customer Reviews 4.4 4.4 out of 5 stars 167 ratings 4.4 out of 5 stars
Finish ‎White
Included Components ‎End Product & Information
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 3.75 x 1.5 x 8.75 inches
Item model number ‎19131
Item Package Quantity ‎1
Item Weight ‎1.44 ounces
Manufacturer ‎Seachoice
Material End Product & Information
Material ‎End Product & Information
Part Number ‎50-19131
Product Dimensions ‎3.75 x 1.5 x 8.75 inches
Size ‎One Size
Warranty Description ‎Http://www. Seachoice. Com/warranty-information.

3.4

9 Review
5 Star
67
4 Star
15
3 Star
10
2 Star
4
1 Star
4

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Jean
Easy to Install and Adjust
These are great replacement for your old Splash Well Drains! They adjust to you transom or just cut them an inch or more to your liking and re adjust them again! I cut them a few inches short to adjust it to my transom and added clear marine silicone to give it a proper seal to the transom! I got a new set of Splash Well Drains for years to come and they look great on my boat!! I would recommend these for anyone
Scritto da: Spongebob
Make sure this is the right size for your application
This is a "standard" type plastic transom drain tube. Decent quality. There is one issue I ran into. My application was on transom that wasn't quite thick enough for this tube. The diameter is fine. The male side of the tube only has one ridge on the inside to grab the inner piece that you trim to size. Because that one ridge is near the end of the tube, you can't really trim that side of needed. Only the inner side can be trimmed. The male side was the exact depth of my transom in my case. No matter how I trim the inner piece , it sticks out proud just about a 1/4 inch. 1/4 inch is the depth of the single ridge on the male side from the end of the tube. If there were at least a couple ridges on that side so I could adjust both sides for better fit, would have been better for my situation. Will look for a different solution.
Scritto da: Amazon Customer
Perfecto ????
Justo lo que esperaba
Scritto da: Jason D.
Be gentle installing becuse it will crack
Works great but be gentle installing it, it will crack. Haven't had a problem yet
Scritto da: chris
Easy to use
After weeks of searching, I found this on Amazon and it worked great. Replaced my 18 year old transom drain tubes with this product and they look great
Scritto da: Quigley
works great
works great
Scritto da: Miss Sissy
Must cut to fit less than 3". Not removable w/o cutting it out.
I don't like leaving negative reviews, but I am somewhat disappointed in this product. The longer tube is 3" long. If you want to use it in anything less than 3" thick, you have to cut it flush after installation. I don't consider that to be an "adjustment." What look like threads in the photo are actually one-way ridges. The two tubes push together -- one time. • Without threads, you can't snug them down properly. -- With my luck, I would have been between ridges -- too loose for a good fit but not loose enough to go one more click. • You cannot take them apart (to check for water intrusion, apply fresh sealant, etc.). • Removing these drain tubes requires cutting them and replacing them. I have 1-1/4" brass drain tubes that I plan to permanently install with a 1-1/4" flanging tool, but I bought these to use in the short term so that I could remove them and reinstall them while I complete some work on the transom. Since they aren't removable, they won't work for me. Note: I'm sure that these work fine for some people in some applications, despite the drawbacks that I mentioned.
Scritto da: Amazon Regular.
Perfect solution
Fit way better than I anticipated. I put marine sealant all over and then tapped it together, a wooden block on one side and a mallet on the other. I am very pleased with the results.
Scritto da: Guy Delorme
ok
ok

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array