Toc MagnoGrip 002-580 pentru găurit magnetic - pentru stângaci și dreptaci, negru

Name: Toc MagnoGrip 002-580 pentru găurit magnetic - pentru stângaci și dreptaci, negru
Brand: MagnoGrip
SKU: 7336117911919
Price: 207.03 RON
Availability: InStock

Brand:MagnoGrip

3.4/5

L
207.03

MagnoGrip este cel mai mare producător de echipamente de depozitare a sculelor magnetice. Toate produsele noastre sunt concepute pentru a satisface cerințele stricte ale profesioniștilor, antreprenorilor generali, pasionaților de artizanat și bricolajului. Tocul nostru magnetic pentru burghiu este construit pentru a oferi acces rapid la mașina dvs. de găurit fără fir. Fabricat din poliester balistic durabil și încorporat cu magneți plasați strategic, tocul magnetic pentru burghiu MagnoGrip oferă o soluție inteligentă la problema enervantă de a vă pierde burghiele și șuruburile atunci când aveți cea mai mare nevoie! Folosiți tocul magnetic MagnoGrip pentru a vă menține mașina de găurit cu acumulator, burghiile și șuruburile organizate eficient pentru un acces rapid atunci când lucrați. 1 buzunar mare și 8 fante pentru depozitarea burghiilor și elementelor de fixare. Magnet exterior pentru ținerea burghiilor, șuruburilor și elementelor de fixare. Design pentru stangaci si dreptaci. Magnetul oferă acces rapid și ușor la instrumente. Curea reglabilă pentru a ține în siguranță mașina de găurit. Fabricat din poliester balistic 1680D durabil. Compatibil cu majoritatea curelelor de scule.

Nu există unități disponibile

EAN: 7336117911919

Categorii Uneli și îmbunătățiri pentru casă, Unelte electrice și de mână, Organizatoare de unelte, Holdere pentru scule,

Fabricat din poliester balistic 1680D durabil. Curea reglabilă pentru a ține în siguranță mașina de găurit. Design pentru stangaci si dreptaci. Magnet exterior pentru ținerea burghiilor, șuruburilor și elementelor de fixare. 1 buzunar mare și 8 fante pentru depozitarea burghiilor și elementelor de fixare. Importat. Poliester.

Brand	MagnoGrip
Brand	‎MagnoGrip
Brand Name	‎MagnoGrip
Closure Type	‎Magnetic
Color	Black
Color	‎Black
Customer Reviews	4.4 4.4 out of 5 stars 415 ratings 4.4 out of 5 stars
Included Components	‎Magnets
Item Dimensions LxWxH	3 x 6 x 8.5 inches
Item Dimensions LxWxH	‎3 x 6 x 8.5 inches
Item Package Dimensions L x W x H	‎9.76 x 6.89 x 1.81 inches
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎MagnoGrip
Material	Polyester
Material	‎Polyester
Model Name	‎MG-DRLHLST
Number of Items	‎1
Number Of Pockets	‎1
Package Weight	‎0.22 Kilograms
Part Number	‎002-580
Suggested Users	‎unisex-teen

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: P. Crandell

Well built

Bought this to go with a harness tool belt

Scritto da: LEE M.

Too small/Bad angle

Very sturdy. All of my Ridgid tools (drill, 1/2 in. stubby and 1/4 in. impact) fit with a 2Ah battery. A 4Ah or above is just too much weight outside of the holster. It needs to be angled, instead it is completely horizontal. You definitely need to use the strap if you are walking or climbing. The pocket is useful for hanging a measuring tape or something small with a clip, nothing else. The magnet is not strong enough to hold anything that is not very small, very flat and very smooth. My Ridgid 1/2 in. high torque impact wrench does not fit.

Scritto da: T. Moore

Holds 18v drill. Weak magnet.

From the reviews I read, I feared that this might be a little too small, but my Milwaukee 18v fits in with no problems at all. I like the buckle closure over Velcro, as the holsters I have used in the past that used Velco eventually wore out. The holster fits well on my 2" tool belt using the belt loop. I haven't tried the clip on the back. The main reason I bought this holster was that it was swappable to left-handed. I have a hard time finding left-handed stuff, but it looks like this holster will serve that purpose well. There are a few "extras" on the holster, though, that, while I did not order because of these features, seem a little lacking. First, the "gimmick" for this tool... the magnetic base to hold screws and bits. This magnet is very weak. Almost like a refrigerator magnet. I wouldn't trust anything to stay stuck to the magnet for more than a few seconds, and only if I'm not moving around. If I find the placement of the magnet handy, I may cut open the magnet pouch and replace it with a small neodymium magnet. The second seemingly useless feature are the elastic bit "pockets"sewn into the sides. These are only about 1/2 deep, with the bottom sewn closed. As with the magnet, I wouldn't trust them to hold anything for more than a few seconds as I swap out a bit, though my teeth do a pretty good job of that, already. Bottom line... It seems to be a decent left- (or right-)handed drill holster with a reliable closure strap, but don't buy it for the magnet or bit pockets.

Scritto da: Jon

Nice

Works well, love the magnet

Scritto da: Mercy

Buenísimo.

Esto lo compre ora mi hijo que lo necesitaba para su trabajo y dice que le gusto mucho tiene buena calidad y de un material decepciónal.

Scritto da: Dennis S.

PERFECT fit for smaller

Bought one, then bought another to wear on other side or for other user. PERFECT fit for smaller, like 12v, drills/drivers and it holds great. You can even use it cross-draw if you like keeping the handle forward. Not much room in the pockets when drill is in place, but you can securely stick a few screws or other small objects to the outside, to the magnet for easy access. But I bought it for the versatility of carry. Best holster I've seen for these drivers. And I like the clip for fast belt mount or slot for belt thru. One more plus, with the open bottom you can carry a hammer or prybar/wonderbar and not lose it like out of a metal hammer loop! Finally I put my larger driver in the holster, a 19.2v craftsman. I had to push it in due to resistance from the rectangular magnet, then clipped the strap 'cause it seemed a little top heavy. It works also, but not as slick as the smaller driver. So I might cut the threads and take the magnet out of one of them, like I said that wasn't the feature I was after. All told it's really a nice holster, put together really well.

Scritto da: Oakley24

Useful tool

I have never used one of these before, so my only issue is that I keep setting my drill down somewhere that I can't find it, instead of putting it in the holster. It use a 18V Ryobi drill and a Ridgid 18V impact driver, both fit fine. I like that it has a belt clip as well as a loop, I use both, depending on how much work I have to do that day. And the magnet on the front must have been thought up by someone with a genius brain. I can't believe how useful that has turned out to be for me. When you have like 4 screws to drive, put one in your hand and the other three on the magnet. Wish I would have thought of that years ago and patented it.... Overall a pretty good product, not sure how well it will hold up, but so far so good

Scritto da: Raymund Garcia

Great product!

I use it for termite control when I’m up in 2-story ladders. It comes in handy really well!!