Stens New Deck Bearing 230-409 compatibil cu/înlocuitor pentru John Deere M74707

Brand:Stens

3.8/5

L
262.05

Rulment de punte Stens 230-409 pentru Stihl 9503 003 0351 Pentru modele: Stihl: TS410 și TS420 Cutquik Saws ID: .587 OD: 1.428 Înălțime: .428 Etanol: Nu este compatibil cu combustibil mai mare de 10% etanol

Piesele marca Stens au încredere de către dealerii profesioniști pentru a efectua reparații de calitate OEM. Numele Stens este prezentat pe toate ambalajele produselor Stens autentice. Garanția de un an Stens asigură fiabilitate și performanță pentru fiecare piesă. Garanția de un an Stens asigură fiabilitate și performanță pentru fiecare piesă. Compatibil cu/Înlocuire pentru: John Deere: M74707, M42786. Specificații: Capăt mic OD: .625. OD: 1,18.
Bearing Number 230 409
Brand Stens
Country of Origin China
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 25 x 25 x 15 inches
Item model number 230-409
Item Weight 0.46 Pounds
Manufacturer Stens
Material Metal
Product Dimensions 25 x 25 x 15 inches; 7.28 Ounces

3.8

10 Review
5 Star
84
4 Star
11
3 Star
5
2 Star
0
1 Star
0

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: orville anderson
Fits exactly as the original bearing
used on john deere 116 riding mower
Scritto da: Michael Mc Cann
Perfect fit
I have a 1972 John Deere 110 with the 48 inch deck. I decided to rebuild my entire deck, strip and repaint, replace bearings, etc. This was the exact replacement for the bearings in the large double pulley on the middle of the deck. Removing the assembly from the deck was a challenge to say the least! There is a roll pin on the underside that put up a fight. Then used a torch to blast then hammer out the pulley/bearing setup from the underside. Once out I discovered that the bearing is “pressed” into the pulleys. Thankfully I have access to a large press at work, which made short work of it. Putting the whole thing back together is easy. The finished project is PERFECT! Apparently all the noise that the deck was making was coming from this bearing, now with the new one my deck hums.
Scritto da: jrein1
OEM quality.
Fit perfectly.
Scritto da: Amazon Customer
Good
Perfect fit for John Deere 212 varidrive pulley
Scritto da: cpreis
Perfect replacement for JD M74707
An exact replacement for the OE bearing. I used this bearing to repair the noisey double pulley on my JD 111 38" mower deck. I would recommend having access to a hydraulic press to replace this bearing.
Scritto da: Goatsack74
Good deal
Good product for the money
Scritto da: Margie
Great substitute!
Good replacement bearing. Exactly same measurements as old bearing. I have a 1986 Hydro and the part number changed but still fit. BTW - you will need a press to put this in!
Scritto da: Eugene Whitt
It does what it is supposed to
Sure do like it.
Scritto da: Rick G
Good quality Japanese bearing
Looks,feel,weight,finish were excellent…oem equivalent
Scritto da: laverne marshall
Works great, used it today.
John Deere 112L deck

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array