SharkBite Adaptor de alunecare FNPT de 1/2 inch, armătură de instalații din alamă Push To Connect, cupru, CPVC, U3482LFA alamă de 1/2 inch

Name: SharkBite Adaptor de alunecare FNPT de 1/2 inch, armătură de instalații din alamă Push To Connect, cupru, CPVC, U3482LFA alamă de 1/2 inch
Brand: SharkBite
SKU: 0697285008090
Price: 268.09 RON
Availability: InStock

Brand:SharkBite

3.7/5

L
268.09

SPECIFICAȚII: Fabricat din alamă forjată DZR, acest adaptor de alunecare FNPT poate rezista la 200 de grade F și 200 PSI. PREFERATE DE PROFESIONIST: Uneltele și fitingurile SharkBite îndeplinesc aceleași standarde înalte pentru aplicațiile de instalații sanitare comerciale și rezidențiale, combinând durabilitatea și ușurința în utilizare; potrivit pentru adăugarea unui rezervor de expansiune pentru încălzitorul de apă la o linie existentă. UȘOR DE INSTALAT: T-ul de împingere din alamă SharkBite cu filet FNPT are un mecanism de conectare pentru o unire etanșă, fără unelte, sertizare, lipici sau lipire; poate fi rotit după asamblare pentru o instalare mai ușoară și mai rapidă. COMPATIBILITATE: Capetele glisante din alamă funcționează bine numai cu țevi din CPVC și cupru. SHARKBITE BRASS TEE CENTRAL FEMEIA DE ALUNECARE: Teurile de alamă de alunecare din centru sunt folosite pentru a îndepărta o secțiune de țeavă și pentru a adăuga un rezervor de expansiune pentru un încălzitor de apă în mod eficient; ideal pentru lucrul în spații înguste; îndepărtați folosind o clemă de deconectare sau clești de deconectare s.

Cantitate

Adaugă in coş Cumpără acum

EAN: 0697285008090

Categorii Uneli și îmbunătățiri pentru casă, Cărgatoare, Țevi, fitinguri și accesorii, Fitinguri pentru țevi,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Tee
Connector Type	‎Tee
Customer Reviews	4.6 4.6 out of 5 stars 193 ratings 4.6 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎Slip Adapter
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	5 x 8.3 x 1.1 inches
Item Dimensions LxWxH	‎5 x 8.3 x 1.1 inches
Item model number	‎U3482LFA
Item Package Quantity	‎1
Item Weight	0.4 Pounds
Item Weight	‎0.4 Pounds
Item Weight	‎6.4 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎U3482LFA
Product Dimensions	‎5 x 8.3 x 1.1 inches
Size	1/2 in.
Size	‎1/2 in.
Style	‎Push To Connect Brass Plumbing Fitting, Copper, CPVC
Thread Type	NPT
Thread Type	‎NPT
Warranty Description	‎Limited 25 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Adam

Best option

Finally fixed the annoying hammering on the washer. Yes I could have bought another pre made arrestor but they don’t last and are expensive. This way I can service myself.

Scritto da: Bebobily

First Time User

Not wanting to sweat copper on an existing inline retrofit, I took a chance on Sharkbite. Any skepticism was unwarranted as the connection is perfectly dry and secure months later.

Scritto da: Mark R

Simple

Easy installation. This slip fitting is aimed a adding a Tee to an existing run of pipe where the ability to move the pipe is limited. Turn the water off, cut out a small section of pipe - up to 2". Clean off any burrs. Mark both pipes with the insertion depth either with the special tool or with a ruler. Push the slip end of the fitting over one half of the pipe. It takes a little force but not much if it is aligned straight. Push it on just far enough to allow the other pipe in to the other end of the fitting. Do not push the fitting all the way up against a stud or joist as you won't be able to get the tool in to release it! Use the included plastic tool to push on the slip end of the fitting to release the teeth so you can slide the fitting up to the insertion mark you made on the other part of the pipe. There is also a release tool that clamps against the teeth release and the fitting - this is easier to use and can fit in a smaller space. Screw in your other fitting in to the 3rd port. Or you can preassemble it before attaching to the pipework. I used PTFE tape and a little pipe sealant on the male thread. Turn the water back on and check for leaks. It takes longer to type up than to install.

Scritto da: francisco escobedo

Nice perfect size!

Great for temporary assemble and des-assemble thanks.

Scritto da: Tony L

Sharkbite fittings are awesome!

It's all I use now for any plumbing job.

Scritto da: Mark R

Well Made, Easy to Install

This slip fitting allows you to add it to an existing run of pipe where there is limited ability to displace the pipe to fit a regular fitting in. It comes with the plastic horseshoe device that you need to push on the end of the fitting to retract the teeth and allow it to slip. When installing be sure to leave enough space so you can fit this tool in. There are also disconnect tongs available which are easier to use and can be used in areas with less clearance to the end of the fitting. Be sure to deburr the end of your pipes so the O rings aren't damaged to avoid leaks.

Scritto da: Dan O

Plumbing is now DIY!

These products are very simple to install and make plumbing a DIY project, saving me (and you) hundreds of dollars.

Scritto da: Hamilton2029

Lifesaver

Plumber wanted $600 for a repair that this easily solved for a few bucks. I did it myself with 0 experience.

Scritto da: William Lau

Works great, easy install.

Save your time and worry by just getting a SharkBite. Sure, you can sweat your own copper, but for the non-professionals, this system works so well, so fast it isn't worth the hassle. Zero leaks This slip-tee was a bit tricky to get it to slide for the final step of installation, but eventually I got the hang of it.

Scritto da: Jeremy C

Best Way to Tap Into Copper Line

Easily tapped into a 3/4" copper line. Used a 3/4" MNPT to 1/2" pex adapter to connect a 1/2 pex line. Went together quick and easy with no soldering. Did it while the copper was still wet!

Scritto da: Rejean Brisson

Work saver

Did what I had to do with this part (needed for the installation of expansion tank). Saved a lot of time and hassle - guaranteed.