Set pentru chei Steelex M1082 Woodruff, 9 piese

Brand:Steelex

3.3/5

L
580.63

Ce este cald, confortabil și lână peste tot? Jacheta lungă Panorama Columbia pentru femei. Jacheta Columbia ușoară, pregătită pentru iarnă, este cel mai bun furnizor de căldură și o piesă de stil de zi cu zi. Fabricată din carcasa noastră durabilă 100% poliester, această jachetă Kruser Ridge II Softshell este piesa perfectă de stratificare și prima linie de apărare pentru a combate frigul. Conține o potrivire clasică modernă, cu caracteristici reglabile care permit o mișcare confortabilă și buzunare laterale cu fermoar pentru a vă păstra obiectele mici (inclusiv mâinile) în siguranță. Un bonus suplimentar este gulerul cald, care este flexibil, astfel încât să puteți alege dacă doriți să-l purtați în sus sau în jos, în funcție de nivelul dorit de toast. Jacheta noastră softshell de pluș este disponibilă și în multe dimensiuni și culori adaptabile. Pentru a vă asigura că mărimea pe care o alegeți este corectă, utilizați tabelul nostru de mărimi și următoarele instrucțiuni de măsurare: Pentru mâneci, începeți din centrul spatelui gâtului și măsurați peste umăr și până la mânecă. Dacă găsiți un număr parțial, rotunjiți până la următorul număr par. Pentru piept, măsurați în partea cea mai plină a pieptului, sub axile și peste omoplați, menținând ruloul ferm și la nivel.

Nu există unități disponibile

EAN: 0754001510821

Categorii Uneli și îmbunătățiri pentru casă,

Hss, tijă de 1/2 inch. 1/16-inch pe 1/2-inch, 1/8-inch pe 1/2-inch, 1/8-inch pe 3/8-inch. 5/32-inch pe 5/8-inch, 3/32-inch pe 5/8-inch. 3/16-inch pe 3/4-inch, 1/8-inch pe 3/4-inch. 3/16-inch pe 1-inch, 1/4-inch pe 3/4-inch.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎India
Customer Reviews 4.3 4.3 out of 5 stars 46 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎M1082
Item Package Quantity ‎1
Item Weight ‎15.2 ounces
Manufacturer ‎Steelex
Material ‎HSS
Measurement System ‎Imperial
Package Dimensions ‎5.6 x 2.8 x 2.6 inches
Part Number ‎M1082
Warranty Description ‎1-Year Warranty

3.3

8 Review
5 Star
58
4 Star
29
3 Star
3
2 Star
4
1 Star
7

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Bruce Wilson
Great deal
Great product!
Scritto da: Cletus Berkeley
Good Cutters
Recently got these for my shop-floor. Good set of cutters at a reasonable price. Use lots of oil when cutting and go slow with feeds and speeds. Some info per ANSI B17.2 follows: DEPTH CUT KEY ID NOMINAL SIZE +0.005 -0.000 403 1/8 x 3/8” 0.1045” 204 1/16 x 1/2” 0.1668” 404 1/8 x 1/2” 0.1355” 305 3/32 x 5/8” 0.1981” 505 5/32 x 5/8” 0.1669” 406 1/8 x 3/4” 0.2455” 606 3/16 x 3/4” 0.2143” 806 1/4 x 3/4” 0.1830” 608 3/16 x 1” 0.3393”
Scritto da: sfoote
Good Enough
These cut very well, for the price. Was able to cut a 1/8"x1/2" key seat into the shank of a 3/4" grade 8 Hex Bolt with zero issues. Very clean cut. If you watch your feeds & speeds and use a quality cutting oil, these should hold up for small scale general machine work. Only 4 stars because these cutters do not have the inch-size listed on the wooden holder OR on the shank of the cutter.
Scritto da: Nick
So-so
Haven't played with them much yet, but cutting a short groove in mild steel produced noticeable wear on the cutter. I did do it dry with one of the cutters I'm less likely to use in case it suffered, so I'll try with lubrication next time and see what happens. I'm sure they'll work fine for aluminum and polymers, but if you're going to be cutting steel, especially hardened steels, buy higher grade cutters.
Scritto da: Cb Finley
Nice
Nice cutter selection
Scritto da: Fella
A lot of cutters for a really great price. Seem to be performing great so far.
The cutters appear to be well made. The two I've used run true and cut an accurate slot. The material I'm cutting is nickel silver, a copper alloy so I can't say how well they would perform on steel. It's still a tricky material to work with and I'm pleasantly surprised with the surface finish on the finished parts. Your getting a lot of cutters for a really low price and I had my doubts about them. Perfect for the job I'm doing and really nice to have in the machine shop for those odd jobs. Not sure they'd be my choice for heavy use large volume work. A good purchase for the machine shop as long as you keep your expectations in check.
Scritto da: Jim Luthje
Works fine!
I've only used 1 of the cutters so far but it did a great job cutting the keyway to the proper size. I'm only giving it 4 stars because I haven't used them all but if they all work as well as the 1 I used it would deserve the fifth star!
Scritto da: Pat
too thick
cut well but .003 to .005 too thick and create loose keyway. Bad quality control

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array