Rain Bird HPTCX pentru irigare prin picurare 2-în-1 Combinație de tăiere a tuburilor/Uneltă de perforare Cutter combinat de tăiere a țevilor/Uneltă de perforare

Brand:Rain Bird

3.4/5

L
206.04

DESCRIEREA PRODUSULUI Rain Bird HPTCX irigare prin picurare 2-în-1 Combinație de tăiere a tuburilor/Uneltă de perforare. Această unealtă combinată 2 în 1, care economisește timp, taie și perfora găuri în tuburile de irigare prin picurare. Design cu arc cu prindere ergonomică confortabilă; perforator din oțel călit; și lamă chirurgicală din oțel inoxidabil. Lama înclinată pe două fețe aliniază tubulatura pentru o tăietură curată, pătrată, fără margini zimțate sau strivire a tubului. Pentru a utiliza funcțiile de tăiere și perforare: (1) strângeți cele două capete care nu se taie împreună (2) așezați tubul în deschiderea corespunzătoare (3) strângeți/aplicați presiune pe capătul de tăiere/poanson. Designul cu arc va închide automat fălcile după tăiere sau perforare pentru siguranță și confort de depozitare pe teren. Perforatorul străpunge o gaură curată și lasă tubul liber de reziduuri. Perfect pentru perforarea găurilor în tuburi de picurare de 1/2 sau mai mari pentru instalarea tuturor varietăților de: picuratoare/emițătoare, dispozitive de pulverizare/ceață/barbotatoare/riser și fitinguri pentru tuburi 1/4. Excelent pentru tăierea țevilor LPDE, țevilor de vinil, țevilor de irigare prin picurare, furtunurilor de înmuiere, țevilor de vinil transparent (CVT) și alte țevi moi cu diametrul exterior de până la .866 (22 mm). Culoarea violet foarte vizibilă permite ca instrumentul să fie ușor de văzut în iarbă, sol, scoarță etc. Punga de plastic convenabilă conține (1) unealtă HPTCX. Măsuri instrument: 8,4 lungime x 2 lățime x 3,5 înălțime. Rain Bird Utilizarea inteligentă a apei. DE LA PRODUCĂTOR Rain Bird Corporation este o companie privată fondată în 1933 în timpul boom-ului agricol din California. Suntem recunoscuți ca producătorul și furnizorul numărul 1 de produse și servicii de irigare din lume. Cu birouri de vânzări pe tot globul; oferim peste 4.000 de produse de irigare care economisesc apă în peste 130 de țări. Încă de la început, Rain Bird a produs și oferit cea mai largă gamă de produse de irigare de înaltă calitate din industrie pentru: ferme, terenuri de golf, arene sportive, dezvoltări comerciale și case. În ultimii 80 de ani, Rain Bird a primit peste 450 de brevete în întreaga lume. Inclusiv primul pentru irigare în 1935 pe aspersoarele noastre originale cu acționare cu impact (brevetul SUA nr. 1.997.901) care a revoluționat producția de alimente agricole și a inaugurat o nouă eră în irigații la nivel mondial. În 1990, acest aspersor cu impact original a fost desemnat un reper istoric de către Societatea Americană a Inginerilor Agricoli. Produsele noastre acoperă toate aspectele de irigare... temporizatoare/controlere, aspersoare rotative pop-up, aspersoare pop-up cu cap de pulverizare, duze de stropire, supape de irigare, irigare prin picurare, drenaj și multe altele. Aceste produse au fost alese și instalate la nivel mondial în cele mai mari și prestigioase proiecte de irigare rezidențială, comercială, agricolă și terenuri de golf. Rain Bird se angajează să utilizeze Intelligent Use of Water™, extinzându-se dincolo de produse la educație, formare și servicii pentru industrie și comunitate. Moștenirea noastră este să proiectăm și să fabricăm numai produse de cea mai înaltă valoare și calitate. Suntem recunoscători că am primit numeroase premii de recunoaștere de la mulți dintre partenerii noștri valoroși. Rain Bird „Utilizarea inteligentă a apei

Culoarea violet foarte vizibilă permite ca instrumentul să fie ușor de văzut în iarbă, sol, scoarță, mulci etc. Aderență ergonomică superioară. Perforează o gaură curată și oferă o tăietură curată, pătrată, fără margini zimțate sau tuburi zdrobite. Poanson din oțel călit și lamă din oțel chirurgical. Taie toate dimensiunile tuburilor de picurare și, de asemenea, perforează găuri pentru picuratoare și fitinguri 1/4. Instrument combinat 2 în 1 cu arc.
Country of Origin Canada
Customer Reviews 4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Item model number HPTCX
Item Weight 0.017 ounces
Manufacturer Rain Bird
Product Dimensions 0.89 x 0.89 x 2.15 inches

3.4

13 Review
5 Star
69
4 Star
14
3 Star
8
2 Star
3
1 Star
6

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Sandra
made my job easier
it made my job easier
Scritto da: Angel Douglas
Very small so dont lose it, worked good for what It was needed for
I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.
Scritto da: JS
Slow shipping.
Works great
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Flamsteed
I needed his
I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.
Scritto da: JNK
Blade works great, hole punch not so much
The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.
Scritto da: Saeng Fio Chao
Great handy tool
With all others tool, I find this is the best one
Scritto da: Ed
Don't forget the tool!
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Annette Dreger
Very easy to use
Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!
Scritto da: Amazon Customer
retour imposible
J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item
Scritto da: DP Kindle Customer
It works!!
Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!
Scritto da: rferraro
Product description is misleading
I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....

Produse asemanatoare

hot
COT ÎNCHIPAT 1/4 10BUC Cot 1 Pachet
3.7/5

L 129.87

COT ÎNCHIPAT 1/4 10BUC Cot 1 Pachet
3.7/5

L 129.87

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array