POWERTEC 71539 Masă pentru presa de găurit 14-inch x 24-inch cu sistem complet de gard cu mai multe căi în T din aluminiu – Seria profesională pentru prelucrarea lemnului

Brand:POWERTEC

3.1/5

L
1052.56

Vă prezentăm setul de feronerie pentru prese de găurit și setul de feronerie cu mai multe șenile în T de la POWERTEC. Setul conține: (1) Blat de masă – accesoriu pentru presa de găurit care permite montarea rapidă și sigură pe majoritatea stilurilor și dimensiunilor (include 12 inchi sau mai mare) de mese de găurit. (1) Multi t-Track Fence – extrudat din aluminiu premium. Dispune de o interfață securizată cu masa care alunecă înainte și înapoi pentru a se potrivi nevoilor oricărui proiect. Conceput pentru a vă ajuta să personalizați și să vă creați propriile stații de lucru, garduri, dispozitive și dispozitive de fixare.(1) Inserție detașabilă/reglabilă – Permite utilizatorilor să găurize complet prin piesa lor de prelucrat fără a deteriora masa (1) 71367 POWERTEC 3” Fence Flip Stop – Dispune de o Design pre-asamblat, ușor de utilizat, cu un braț care se răstoarnă în jos când este necesar și rămâne ascuns atunci când nu este utilizat, plus că alunecă în sus și în jos orice gard cu o șină în T montată în partea de sus și se blochează confortabil prin buton. Opritorul poate fi convertit din poziția interioară în poziția în afara bordului, iar brațul basculant poate fi setat pentru partea dreaptă sau stângă a corpului. conexiune perpendiculară atunci când atașați garduri și alte dispozitive de fixare la accesoriile dvs. cu fantă în T, șinele multi-t și aplicațiile de prelucrare a lemnului. Funcționează exclusiv cu POWERTEC și se potrivește cu sistemele Rockler T-Track.(4) 71083 Cleme de fixare POWERTEC T-track – Dispune de butoane cu 5 stele proiectate ergonomic, plăcuțe de prindere care nu se deteriorează și o capacitate de strângere de înaltă tensiune. Oferă o acțiune excelentă de prindere pentru ansamblurile dvs. de sistem t-track. (4) Șuruburi de reglare – Folosite ca inserții, acest hardware de instalare ajută la fixarea și fixarea inserției pe blatul mesei. Poate fi reglat cu o șurubelniță cu cap Phillips.

Nu există unități disponibile
SETUL INCLUDE: blat de masă pentru presa de găurit, gard în formă de T, cleme în T, opritoare pentru gard, suporturi în formă de L, butoane, inserții și alte feronerie de instalare. VERSATILITATE A PROIECTULUI: Vine cu o gamă largă de cleme pentru prelucrarea lemnului, inserții reglabile și butoane care vă pun controlul înapoi în mâini - permițându-vă să vă ajustați echipamentul pentru a se potrivi cerințelor și obiectivelor specifice ale proiectului. GARD MULTI T-TRACK: scară gravată cu laser, lungime de 24 inchi, cu o dreptate excepțională - Profil reversibil pentru măsurarea stângă sau dreaptă), distanțat la 3/4 inchi (în centru), 3/4 inci grosime și 3 inci înălțime. Această unealtă multifuncțională acceptă cele mai comune accesorii de fixare cu șuruburi în T de 1/4”, șuruburi în T de 5/16” și șuruburi hexagonale de 1/4”. BAT DE MESA UNIVERSAL: Permite montarea rapidă și sigură la majoritatea stilurilor și dimensiunilor (include 12 inchi sau mai mare) de mese de forat. FUNCȚIE: Acest set de presa de găurit vă oferă o colecție versatilă de instrumente și accesorii pentru presa de găurit atunci când trebuie să duceți presa de găurit la nivelul următor. Ajută la obținerea rezultatelor cu aspect profesional pentru multe dintre aplicațiile dvs. de prelucrare a lemnului, de găurire din plastic sau compozit și de prelucrare a metalelor.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Customer Reviews 4.0 4.0 out of 5 stars 81 ratings 4.0 out of 5 stars
Included Components Drill Press Table 14-Inch x 24-Inch w/Complete Aluminum Multi T-Track Fence System
Included Components ‎Drill Press Table 14-Inch x 24-Inch w/Complete Aluminum Multi T-Track Fence System
Item model number ‎71539
Item Package Quantity ‎1
Item Weight ‎14.65 pounds
Manufacturer ‎POWERTEC
Part Number ‎71539
Product Dimensions 24"L x 14.56"W x 2.95"H
Product Dimensions ‎25.47 x 14.56 x 2.95 inches

3.1

9 Review
5 Star
59
4 Star
16
3 Star
7
2 Star
9
1 Star
10

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: G. Algier
Fits well, but insert non-standard
I purchased this for use on a Wen 4214T drill press. It fits well. No problems clamping it, the adjustment crank clears the back of the table. Everything seems to be fine, except the insert. I was going to cut a few extra inserts before this one gets chewed up, but the MDF is a non-standard thickness. Thicker than 1/4 inch, but thinner than 1/2 inch. It isn’t even a whole metric size. I will probably have to make replacements from 1/2 inch lumber that I plane down to size. So much for cheap MDF.
Scritto da: Dennis Beaudry
Get what you pay for.
This was not the cheapest or 'pro quality', so I didn't expect to much but paid alittle more hoping for sturdy construction. Would have been a 2 star due to tightening the underneath clamps, the railing screws popped right out. Upon inspecting the other screws they were not tight. I had larger flat head screws, and glue, so repaired flaw myself, as I neede to use it when it was delivered. I was attaching to a smaller drill press (8") and it worked without the modification I was expecting. For this I gave it 1 more star. The railing system does work well. I would like to have seen the top project hold downs to be longer and will have to make some myself. The larger table is fine, but poor quality pressboard. This is inexpensive table that will not take much pressure, use on smaller projects, or on a secondary drill press. This is where mine will be or I would have returned it.
Scritto da: Dj Voodooman
Good Table after...
Love the table . although the width of both tracks need to be almost even to mount correctly on drill press. I had to install mine upside down no problem to me honestly other it might be.. Yep had to change screws in track.. no issue added glue as well not it does not move. Bought a second fence and wow that was like super help and having a third set of hands As my first table like this. So far it is very good. I gave 4 stars because they used to small a screw in securing the T tracks.
Scritto da: JF
Disappointed but hopeful
One of the t-tracks began to break away from the table as I tightened a clamp. My solution was to (1) glue the t-tracks in their slots and (2) replace the 1/4" inch wood screws with 3/4" 8-32 flat head bolts with nuts, drilling through the table and countersinking the holes. This modification should suit my light, occassional use. I'm sure there are better drillpress tables out there for the money ($120), but I try to avoid products made in mainland China if I can. Powertec products are supposedly manufactured in Taiwan.
Scritto da: Kindle Customer
Very good
Well worth the price compared to the cheap ones.
Scritto da: Latigo
Won't fit all drill presses
This table blocks the crank for the height adjustment on my press. It seems like a nice enough table, but it would be a pain to remove every time I need to adjust the height.
Scritto da: Dave
Great Purchase!!!
I was looking at drill press tables and t-tracks for a new workbench I'm building and got lucky! I didn't want to put a WEN table on my 12" BILT HARD! Anyways, I am really grateful to come across PowerTec's t-track systems. I just started on my VERY 1st, personal (yes, it's not in someone's shop), track system and like the quality, value, and options. I made the mistake and purchased 24" sets from another company and totally regret it. The pics show better. Nevertheless, I am happy with Powertec. Great Job!
Scritto da: kim
Great buy
Gave it to my son for Christmas. He said it was great.
Scritto da: JAGO
'Es bueno pero…
Es un buen producto pero no se acopla a todas las marcas marca realice unos cortes y lo ajuste

Produse asemanatoare

hot
POWERTEC 71182V Multi T-Tracks
3.7/5

L 428.38

POWERTEC 71182V Multi T-Tracks
3.7/5

L 428.38

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array