POWERTEC 110090 Curele de șlefuit 4 x 24 inch

Brand:POWERTEC

3.4/5

L
224.52

Vă prezentăm cureaua de șlefuit cu oxid de aluminiu cu granulație 80 de 4” x 24” de la POWERTEC. Acest pachet premium de 10 a fost conceput pentru a vă oferi un set rentabil de benzi de șlefuit de lungă durată și de înaltă performanță. Fabricate cu granulație de oxid de aluminiu (A/O) cu strat deschis, acţionează ca un instrument multifuncţional cel mai bine utilizat pentru șlefuirea, modelarea, decaparea lemnului și pentru a oferi un finisaj neted multor aplicații de prelucrare a lemnului. În plus, aceste curele funcționează excepțional de bine cu metale ușoare și neferoase, amestecând suduri, fibră de sticlă, plastic și cauciuc. Fiecare centură prezintă un suport îmbrăcat cu greutate X și are o legătură puternică de rășină pe rășină, cu cusături bine lucrate pentru rezultate de lungă durată. Indiferent dacă sunteți un tip profesionist sau bricolaj, aceste curele de șlefuit rezistente sunt compatibile cu multe dintre dvs. mașini de șlefuit, inclusiv: Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo și multe altele! Specificații: Dimensiunea curelei abrazive: 4-inch x 24-inch Grit Size : 80Material: Oxid de aluminiu cu strat deschis premium (A/O) Granulație: Suport din pânză cu greutate „X” puternică Îmbinare: Construcție puternică pentru îmbinare cap la cap Pachet: 10 bucăți Ghid de selecție a granulației:• 40 – 60 Granulație: șlefuire și decapare grea• 80 – 180 Granulație: Îndepărtare Imperfecțiuni minuscule• Granulație 240 – 400: Oferă un finisaj neted super finPOWERTEC este un producător profesionist de mașini de înaltă calitate pentru prelucrarea lemnului, accesorii pentru prelucrarea lemnului și o gamă largă de piese de schimb OEM. Ne angajăm să depășim așteptările, oferind în același timp cele mai bune inovații, tehnologii și dezvoltare de produse în industrie.

GRIT: Disponibil într-o gamă largă de granulație uniformă - 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400. Meșteșuguri: Aceste curele de șlefuit de 4"x24" au un material rezistent la căldură și umiditate și au fost proiectate cu cusături realizate cu experiență, care nu se vor rupe sub presiune. GRAD PREMIUM: Fabricat cu suportul nostru îmbrăcat superior X-Weight, un strat deschis de granule de oxid de aluminiu și o rășină impresionantă pe rășină care asigură performanțe de lungă durată. UTILIZARE: Funcționează cu o gamă largă de mașini de șlefuit cu bandă și aplicații - oferind un instrument de decuplare și șlefuit greu pentru lemn, aluminiu, fibră de sticlă, cauciuc, plastic și metale neferoase.
Amperage Capacity 11 Amps
Amperage Capacity ‎11 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 740 ratings 4.3 out of 5 stars
Grit Number 80
Grit Number ‎80
Grit Type Medium
Grit Type ‎Medium
Included Components ‎POWERTEC 110090 4 x 24" Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 4 x 4 inches
Item Dimensions LxWxH ‎10 x 4 x 4 inches
Item model number ‎110090
Item Package Quantity ‎1
Item Weight ‎1.5 Pounds
Manufacturer ‎POWERTEC
Material ‎Aluminium
Part Number ‎110090
Product Dimensions ‎10 x 4 x 4 inches
Size ‎80 Grit

3.4

13 Review
5 Star
70
4 Star
14
3 Star
3
2 Star
2
1 Star
11

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Randy Browning
Can’t speak to longevity, but they work.
I’ve used one of the 40 grit belts, so I’ll generalize in this review. I purchased a Bauer 10amp 4x24 belt sander from Harbor, and these fit perfect. I’m working on a sap filled 16” pine disk so the medium causes the belt to gum up (it would not matter what belt you use), but it cleans up well by using a brass wire brush on the belt while running the sander. The finer the grit the more it will clog, but again that’s with any belt. The paper track material is thick and does not show any signs of separation, and the 4” width helps it track straight. The cost per belt is less than half of any big box belt, and only 70% of the offerings at Harbor, which were thin and no where near the accurate grit density.
Scritto da: Amazon Customer
Update after I use
Received on time. Have not used yet but seem to be well made. Will update after I use
Scritto da: jon fredricks
good service
good quality and price
Scritto da: D Lee
Belts Break!!
Poor seams!! Every belt used (4 in all) broke after several minutes of deck sanding with a Makita sander. On the 4th try I had to disassemble the sander to remove the broken belt. Upon closer inspection it is obvious that the seam tape is failing. See photo. Clearly this is a faulty design that has not been adequately tested by the manufacturer. My remaining belts will be trashed.
Scritto da: Warren Y.
solid sandpaper
I used this sandpaper to sand down uneven transition height between sheathings in a mobile home subfloor. The sandpaper is strong and i only used up 3 of these for the entire mobile home. One thing i learned is that if you're looking to take down surface quickly on plywood... go with a 60 or 36 grit paper. 80 is still too fine to take down uneven surface quickly. You'll be there all day although at the end of the day, the job actually gets done.
Scritto da: fishing buddy
Look good.
They look, were shipped promptly. Priced right. I just have been too busy to try them out. Want to work on half log benches stained and coated with epoxy. Used for the first time yesterday, work great.
Scritto da: Tandy Norris
They eat wood as they should.
They work great on my belt sander.
Scritto da: andres cardenas
Very week glue
I sand around 70-100 cabinet doors a day, and these sanding belts only lasted 7-13 doors per belt. I would imagine they would be amazing once you break in the belt, but you won't get to that point.
Scritto da: Vic
Works very well. Did the job I needed it to.
Have a small woodworking shop in my garage my wife and I make different things out of wood. The sandpaper came in very handy works well fits good on the machine. Longevity is OK. Value is good. Did what I needed it to do and I’m still using them.
Scritto da: Hyrule Cofee
Inconstant quality
I bought 4 packs of those sand belt. 2/4 of them was ok and does a great job. The 2 others broke after 5 minutes of sanding. The blue junction between ends is weak for them. So you get a chance of a good or really bad belt.
Scritto da: n
Don't buy these Sanding belts
They work for a while, but fall apart (catastrophically) within a few minutes of use. Other brands do not, so its not the fault of the sander. The belts start to come apart and tend to jam the sander. Do NOT use these. I tried to return an unopened package, but was (sadly) 2 days late and the return window is closed. I will never use Powertec products again.
Scritto da: Jorge Adrian Fernandez Campos
Muy mala calidad
Que lastima de la calidad del producto, llego en tiempo y el precio muy accesible pero lamentablemente al utilizar las bandas se despegaron de inmediato, no duro ni tres minutos de uso y se despegaba, utilice otra para ver si era un defecto en esa unidad, pero al parecer el pegamento no tiene la adherencia necesaria y se despega, lo cual puede ocasionar un accidente a quien está manipulando la lijadora
Scritto da: Chris R.
Garbage, never had so many belts break so quickly.
These belts are garbage and do not last more then 10 mins before snapping. I even went out and bought a quality belt to test my Sander before posting this. It worked perfect for 30 mins, put another on of these back in and snapped in less then 10 mins.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array