0
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister

Pony Jorgensen 27091 Menghină pentru lucrător în lemn, portocaliu, gri, 9 inchi pe 7 inci

Brand:Pony Jorgensen

3.7/5

L
595.05

Menghina pentru muncitor de lemn Pony este pentru uz mediu acasă, magazin sau uz profesional. Este conceput pentru a fi montat pe fața băncilor de lucru din lemn. Marginile superioare ale fălcilor sunt în mod obișnuit aduse la același nivel cu blatul bancului. Se va monta pe fața oricărui banc de lucru din lemn, dar este posibil ca unele bănci de lucru să fie modificate prin mortificarea unei părți a feței bancului sau prin adăugarea de lamele din lemn pentru a permite fălcilor să fie la nivel cu blatul bancului. Fălcile au găuri perforate pentru atașarea plăcilor din lemn, ceea ce vă permite să vă protejați munca (fețele din lemn nu sunt incluse). Falca din față are un câine din oțel solid în falca din față care, atunci când este folosit împreună cu o oprire de banc, permite ca lucrările supradimensionate să fie ținute în siguranță pe bancă. Menghina funcționează fără probleme cu șurubul principal cu filet Acme și bare de ghidare duble din oțel placat. Dispune de o lățime a falcii de 7 inchi și o capacitate maximă de deschidere de 9 inchi. Piesele turnate sunt din fier cenușiu, cu finisaj email copt portocaliu. Pony Tools Inc. din Chicago (cunoscută anterior ca Adjustable Clamp Co.), care a fost înființată în 1903, este producătorul tuturor produselor Pony și Jorgensen. Menghinele pentru lucrator de lemn Pony sunt importate din China.

Cantitate
Adaugă in coşCumpără acum

EAN: 0044295270915

Categorii Uneli și îmbunătățiri pentru casă, Unelte electrice și de mână, Unelte de mână, Unelte de lucru, Clape, Cleme de masă,

Menghina este pentru utilizare medie acasă, magazin sau uz profesional. Proiectat pentru a fi montat pe fața băncilor de lucru din lemn. Greutate pachet: 5,96 lbs. Țara de origine: China.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Pony Jorgensen
Color Orange,grey
Color ‎Orange,grey
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 1,104 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Product Information Guide
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 16.25 x 8.25 x 6 inches
Item model number ‎27091
Item Package Quantity ‎1
Item Weight 11.8 Pounds
Item Weight ‎11.8 pounds
Manufacturer ‎Pony
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎Inch
Number of Handles ‎1
Part Number ‎POJ27091
Power Source ‎Hand Powered
Product Dimensions ‎16.25 x 8.25 x 6 inches
Size ‎Pack 1
Style Woodworker's Vise
Style ‎Woodworker's Vise
Warranty Description ‎All devices manufactured by PONY TOOLS INC.

3.7

10 Review
5 Star
74
4 Star
19
3 Star
5
2 Star
1
1 Star
1

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Craig Sivley
Good vice and value
I chose to glue the hardwood plates to the inside faces of the plates to avoid counter sunk screws. Recommend two people to fasten to the bench.
Scritto da: John M
Not medium duty as described
First this vice is an 8” not a 9” as described. Also, not sure if I would rate this as medium, I see it more as upper lite/low medium. Unfortunately, it does not have a quick release, which can be very disappointing if you have ever used a vice with that nice feature. The vice does have a dog on it which is nice when clamping larger items, but the dog is only ¼ inch thick. Not sure how well it would hold up if over tighten. The reviews on this vise were great but not sure they were reviewing the same vice. I have almost 50 years of shop experience and taught wood shop for nearly 40 years, so I do have some experience in these matters. Pony at one time was a leader in items like this but not so much now that they are manufactured out of the country. If you have a tight budget or are only a weekend hobbyist then this vice probably would do the job, personally I will be returning it and purchasing a Yost which is a bit more in cost but much more dependable.
Scritto da: Todd Huggard
Amazing sturdy/basic Vise
Woodworking is a hobby for me, not my livelihood but I always wanted a woodworker’s vice. This one is exactly what I was looking for. It's very well made and the price is very reasonable. Regarding the reviews; mine arrived the next day, not 3 weeks later as the only 2-star complaint stated. That was probably a shipping issue and not the seller’s fault. I also saw complaints stating it doesn't come with instructions. While that is true, mounting it to a work bench is pretty straight forward. If you want the top of the clamp to be the same height as your work bench, you'll need to shim for that, but it’s no big deal. I added a 3/4-inch piece of scrap oak to my 1-1/2 in thick bench to bring the total thickness to 2-1/4 in. but I still had to add about 1/16 in of shim stock to get it perfect. I also saw someone say the dog doesn't stay in place. That's not true, its spring loaded and will stay at any height you raise it to. Another complaint was the guide bars are crooked. Mine are perfectly parallel and aligned, the vice opens and closes very easily. And another complaint which is sort of valid is that the 2 center holes on the back plate are 6mm metric, not 10/24 as they look. But you really don’t need to use these holes to attach a board to the back plate. I used the 2 outer holes and simply ran a 2-1/2 in deck screw through the oak board and through back plate into my bench. I also used 2-1/2 in wood deck screws with washers to attach the vice to my bench on the bottom side. I used #10x3/4 sheet metal screws to attach the front oak board to the front plate. One last thing worth mentioning is that I also notched out my work bench so the back plate of the vice is recessed into the bench 1/2 in and the back board is up against the bench. That was the hardest part of attaching the vice but was simply a personal preference. I could have simply attached 1/2 in boards to the bench to fill in the gap between the backer board and the bench on the right and left side of the back plate. All in all, I’m very satisfied with the quality of the vice and would certainly recommend it to anyone with the slightest assembly skills. If it isn’t apparent how to attach it to a bench without instructions you probably don’t need it. By the way, this is the first item I ever bought from Amazon that doesn't have several 1 star complaints.
Scritto da: beth
Decent quality
I needed a vice for my workshop and didn't want to spend $200. This one has worked well for my needs. My main need is will it hold a piece whilst I'm working on it, and it holds quite well. The jaws are angled slightly inward from top to bottom so once a piece is tightened, it tends to square the jaws flat which gives it good holding power
Scritto da: Pakratbob
Solid, Good Quality Vise
Overall, it is a solidly built vise that opens and closes smoothly. The guide rods and the screw seem well made with no pitting, nicks or rust. The bright orange paint is thick and pretty durable. My only real complaint is that there are no instructions included for the operation/maintenance or installation of the vise. I ended up watching a LOT of U-Tube videos on the installation of similar vises and ended up developing my own way of installing it. I put dog holes in my work bench, so my install also included PVC covers over the guide rods and screw to keep them clean from sawdust and other stuff that fall thru the dog holes. Very good purchase for the money... But, if you're looking for a quick, easy install, do your research first!
Scritto da: James P McDermott
Good product for the price
Arrived fast, is a good sturdy product.
Scritto da: The Bareman
Shop Vise
Heavy duty vise, perfect for the woodworking shop!
Scritto da: The Pooch
Great quality for the price
Like the title says. No complaints.
Scritto da: oldman
great vice
easy to mount and clamps the wood without one side being loose i like it
Scritto da: happy customer
worth it
Does exactly what it is supposed to. Good quality , arrived early. Very happy

Produse asemanatoare

hot
Menghină de banc pivotantă pentru utilizare generală AFF, 6 deschidere maximă, adâncime a gâtului 3-1/2, 3942 menghină pivotantă pentru serviciu general 6
2.3/5

L 2878.13

Menghină de banc pivotantă pentru utilizare generală AFF, 6 deschidere maximă, adâncime a gâtului 3-1/2, 3942 menghină pivotantă pentru serviciu general 6
2.3/5

L 2878.13

hot
Menghină Yost Vises 650-C Menghină mecanică
3.5/5

L 2474.61

Menghină Yost Vises 650-C Menghină mecanică
3.5/5

L 2474.61

hot
PANAVISE 311 Suport de bază pentru clemă de bancă
3.5/5

L 473.22

PANAVISE 311 Suport de bază pentru clemă de bancă
3.5/5

L 473.22

hot
Yost Vises UP360 Capac pentru fălci universal de 6 inch în stil prism
3.6/5

L 213.16

Yost Vises UP360 Capac pentru fălci universal de 6 inch în stil prism
3.6/5

L 213.16

hot
Menghină de banc reversibilă Wilton 4550R, lățime fălcilor 5-1/2, deschidere fălcilor 6-3/4 și 10-3/4 (28821)
3.6/5

L 3099.05

Menghină de banc reversibilă Wilton 4550R, lățime fălcilor 5-1/2, deschidere fălcilor 6-3/4 și 10-3/4 (28821)
3.6/5

L 3099.05

hot
Menghină Yost Vises ADI-6 Heavy Duty
3.5/5

L 3218.65

Menghină Yost Vises ADI-6 Heavy Duty
3.5/5

L 3218.65

hot
BESSEY BV-HD60 Menghină de bancă pentru sarcini grele, 6 inchi.
3.6/5

L 1241.91

BESSEY BV-HD60 Menghină de bancă pentru sarcini grele, 6 inchi.
3.6/5

L 1241.91

hot
Wilton 150, menghină de banc cu clemă, lățime cu 3 fălci, deschidere maximă a fălcilor 2-1/2 (33150) Menghină de banc pe bază
0.1/5

L 475.64

Wilton 150, menghină de banc cu clemă, lățime cu 3 fălci, deschidere maximă a fălcilor 2-1/2 (33150) Menghină de banc pe bază
0.1/5

L 475.64

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array

Total:L 0.00

Vezi căruciorulVerifică

Categorii

Toate categoriile
Meniul Categorii Aproape Cart

Menu