Noul modul Stens cu stare solidă 440-417 compatibil cu/înlocuitor pentru Briggs & Stratton 398811

Brand:Stens

3.5/5

L
348.70

La Toland Home Garden, suntem mândri să creăm cele mai bune produse decorative de grădină de pe piață. Steagulele noastre de lux sunt tipărite și produse în SUA și cu peste 4.000 de modele de steaguri, Toland are o varietate de steaguri pentru toate momentele din viața ta. Fie că este primăvara, vara, toamna sau iarna, o sărbătoare națională sau o declarație de credință, avem steaguri pentru fiecare ocazie. Există multe utilizări pentru steaguri Toland; ca un cadou frumos de oferit cuiva drag, o glumă amuzantă atârnată de verandă pentru a-ți face vecinii să râdă sau o tapiserie unică de agățat în casa ta. Adăugăm mereu modele distractive și noi, așa că asigurați-vă că reveniți frecvent!

Nu există unități disponibile
Piesele marca Stens au încredere de către dealerii profesioniști pentru a efectua reparații de calitate OEM. Numele Stens este prezentat pe toate ambalajele produselor Stens autentice. Garanția Stens de 1 an asigură fiabilitate și performanță pentru fiecare piesă. Suntem încrezători că produsele noastre vor funcționa impecabil, dar în cazuri rare în care nu funcționează, le vom înlocui oricând în decurs de un an de la comanda dumneavoastră. Compatibil cu/Înlocuire pentru: Briggs & Stratton: 176432, 192400, 196400, 197400, 19E400, 19G400, 226400, 250400, 252417 și 326437 OEM-uri și 326437: Replace 92 Briggs, Numbers 92 Brigt33. 5492, 398265, 398811, John Deere: PT15339 . Specificații: Descriere: Solid State Module.
Is Discontinued By Manufacturer No
Item model number 440-417
Manufacturer Stens
Product Dimensions 12 x 10 x 2 inches; 12.96 Ounces

3.5

13 Review
5 Star
75
4 Star
11
3 Star
5
2 Star
3
1 Star
6

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Richard Tymer
Great Coil
Purchased this coil for a replacement to a Briggs and Stratton 8hp electric start with no points ignition. Installed it with a .010 brass blade for spacing to the flywheel. Attached the ground terminal and high tension lead to the spark plug and it fired up immediately. Wonderful! Only three things would need to be improved to get a perfect 10. One, the high tension lead to way to long, two, there is not insulating boot and three that if the spark plug terminal was not crimped on I could have cut the lead to the proper size and then let me install the terminal.
Scritto da: Richard M H
Works great on 8HP B&S upright, 1979 toro snowblower.
This worked GREAT on my upright 8HP Briggs and Stratton, on a 1979 Toro snowblower. I did the points and condenser two years ago and it needed it again. I did not want to pop the flywheel yet again and I heard about the modern coil. It went right on in place of the old one and I used an index card to gap it off the flywheel. Runs great! Just left the old points back in there to be forgotten. Spark plug wire on this coil is very long for this engine, That's fine though, it's no problem. Runs great and glad I can forget about points and condenser for the rest of the time I'm stuck with this 41 year old beast.
Scritto da: Trevor
Great results.
It brought new life to a very old engine. The previous points ignition never produced this much spark.
Scritto da: Grandma Patty
Item not as pictured. Will only work for engines without an attached air deflector
The old coil, as well as several still on the market, has 4 rivets, as shown in the photo. One of these rivets is used to hold the air deflector on a B&S 8hp engine. The coil that was shipped does not have this rivet. The coil looks to be well constructed, and I was willing to pay the higher price for Stens quality, but it is not the one advertised, and it does not fit my engine. I bought an Oregon version instead, which (as pictured) has the rivets, and works fine. I'm disappointed in Stens. They're usually better than the cheap knock-off versions.
Scritto da: William Morland
Eliminated the need for points...11 hp vintage B&S 1976 engine Runs fine.
Worked fine. I Won't have to pull flywheel to reach points,any more.
Scritto da: Jas
If you are fighting the points battle, get one of these
Amazing performance on old engines.
Scritto da: Amazon Customer
Nice coil!
Coil wasn’t easy to find? New one fit eliminated one more problem!
Scritto da: Larry In SC
It worked!
It got my 45 year old rototiller running again. Makes good spark and no more points & condenser to dick around with anymore! Installation was straightforward on the horizontal shaft, 8 hp, Briggs & Stratton engine.
Scritto da: Client Kindle
Works great
I installed it on an o;ld rototiler from the 1970s (Briggs&Stratton 190402 model, 8 HP) which had a breaker point-condenser-coil problem. It works really well. I completely removed the point and condenser. Prior to that, I tried a cheaper model claimed to be solid state and it did not produce any spark.
Scritto da: Jarry
Good replacement for old points and condenser
Good price, fit and works great on an old cast iron 11hp briggs and stratton. Eliminate points, no need to pull flywheel
Scritto da: Yvon
La compatibilité avec le modèle du moteur.
Briggs&Stratton 8 hp rotoculteur. Livraison rapide et retour sans problème.
Scritto da: Tassimo
You will not take your fly wheel of again
Bolts on quick and good spark.
Scritto da: Carlo
Easy to install
Works as it should

Produse asemanatoare

hot
Kohler Flapper Clasa 5 3-1/4 Roșu
3.7/5

L 159.13

Kohler Flapper Clasa 5 3-1/4 Roșu
3.7/5

L 159.13

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array