MLCS 200 Set de inițiere cu freze în spirală din carbură solidă, 3 buc

Name: MLCS 200 Set de inițiere cu freze în spirală din carbură solidă, 3 buc
Brand: MLCS
SKU: 0718122842759
Price: 757.95 RON
Availability: InStock

Brand:MLCS

3.6/5

L
757.95

DE LA PRODUCĂTOR Trei bucăți solide din carbură cu microgranule pentru tăieturi rapide și netede și o muchie care rămâne ascuțită mai mult timp. Bițile spiralate produc o tăietură foarte curată și precisă, cu zgomot minim. Spirala tăiată în sus ajută la îndepărtarea materialului din canelură. Ele funcționează bine pentru mortare adânci, tăierea dadoes într-o masă de frezat și orice tratament de margine efectuat cu lucrarea în sus. Include următorii bit UPCUT cu diametrul: 1/4-inch D (1-inch lungime de tăiere, 1/4-inch tija), 1/2-inch D (1-1/2-inch lungime de tăiere, 1/2-inch tija) și 3/8-inch D (1-1/4-inch lungime de tăiere, 1/2-inch tija).

Cantitate

Adaugă in coş Cumpără acum

EAN: 0718122842759

Categorii Unelte electrice și de mână, Piese și accesorii pentru scule electrice, Piese și accesorii pentru routere, Router Bits, Bucăți drepte, spiralate și de finisare, Spiralate,

Tije de 1/4-inch și 1/2-inch. Îndepărtați rumegușul și așchiile de lemn din tăieturile adânci prin forfecare în sus. Perfect pentru mortare adânci și tăiat dado într-o masă de frezat. 3 dimensiuni populare incluse: 1/4-inch, 3/8-inch, 1/2-inch diametru. Carbura solidă cu microgranule taie neted și rămâne ascuțită.

Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 208 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎200
Item Package Quantity	‎1
Item Weight	‎8.8 ounces
Manufacturer	‎MLCS
Material	‎Carbide
Number Of Pieces	‎3
Package Dimensions	‎3.7 x 2.1 x 0.5 inches
Part Number	‎200

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Randy Foxx

very sharp and good value

I cut my first box joint with one of these bits. Cutting maple was like slicing bread with a sharp knife. I definately recommend these bits.

Scritto da: Lawrence Bolger

Perfect for my project

Used these in my RotoZip to create Halloween décor in PVC so wanted up cut.

Scritto da: Dennis Gottschalk

Value sprial router bit set.

The bits produce a decent cut for the cost on box joints.

Scritto da: JIM MORGAN

2 of 3 bits are very good

The two smaller bits have been very good tools. however, the 1/2" bit went dull the first time I used it (on pine, no less, at 1/4 " depth!). the tip burned and the rest will barely even cut. very uneven quality, which is disappointing since I have always been very pleased with mlcs products before. update! since the above review, I have found mlcs has a 3 year warranty that they honor even if you purchase through amazon. they acted quickly and I am being shipped a brand new bit. outstanding! review now is 5 stars.

Scritto da: Mike

Great bits for cutting box joints

I needed a 1/4" bit for my new box joint jig and looked at this set since it had all of the sizes I needed. The cuts were perfect and the box went together easily. Still sharp after over 100 cuts!

Scritto da: Michel Theunissen

Works great on plywood, no more tear-out

I tried using these bits on plywood and the results were great. No more tear-out. Unfortunately, they did not cut through hardwood nicely without shredding the edges off. I was using 3/4" white oak to make box joints, and just ripped them out horribly. Then I used the same bits on 1/2" plywood and seemed to create smooth edges. I gave 5 stars because I bought them for my plywood issues. For hardwood, I just use quality straight bits.

Scritto da: Richard B

Work Great For Box Joints

The uncut sale of these make them perfect for cutting box joints. These are very sharp and appear to be well made. A nice purchase for the price.

Scritto da: Grumpymike

Spiral up cut router bits by MLCS

I purchased these bits to be used in my box joint jig. (Some folks call them 'finger joints'). I have found them to be a good 'Utility Grade' bit at an affordable price, and will serve me well. These bits are not meant to be used in a production line, but for guys like me who use them for a few hours at a time. I have purchased some import bits and found them to be close, but not to exact size; these MLCS bits are a true 1/4, 3/8, and 1/2 inch. And they match the brass setup blocks for a perfect fit every time ... see me smile.