Mânere RCBS Bullet Mold

Brand:‎RCBS

3.5/5

L
471.73

RCBS este specializată în a oferi o linie completă de consumabile de reîncărcare pentru încărcătorul manual de acasă. RCBS Reloader Supplies stabilește standardul pentru echipamentele de reîncărcare de înaltă calitate - la fel cum au făcut-o de peste 60 de ani. Cu șase decenii de experiență sub centură, RCBS cunoaște toate dezavantajele echipamentului folosit de reîncărcătorul de muniție de acasă. Carcasa din alamă este cea mai scumpă parte a unei muniții încărcate. Reîncărcarea alamei (prin înlocuirea amorsei, pulberii și glonțului în interiorul carcasei de alamă uzate) oferă economii de aproximativ 60% față de muniția încărcată din fabrică. Consumabilele de încărcare manuală RCBS oferă trăgătorilor tot ceea ce este necesar pentru a reutiliza cartușele scumpe din alamă, reîncărcându-le cu grund, pulbere și gloanțe noi.

Mărime unică se potrivește doar tuturor formelor de gloanțe RCBS. Perfect pentru turnarea de gloanțe acasă. Cadre solid din oțel cu mânere din lemn de esență tare foarte lungi. Mânere de matriță din lemn/oțel. Mânere de matriță din lemn/oțel. Mânere de matriță din lemn/oțel. Mânere de matriță din lemn/oțel. Mânere de matriță din lemn/oțel.
Brand Name ‎RCBS
Color ‎Multi
Customer Reviews 4.5 4.5 out of 5 stars 54 ratings 4.5 out of 5 stars
Included Components ‎Wood/Steel Mould Handles
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎10.7 x 2.2 x 1.2 inches
Item Weight ‎0.06 Pounds
Manufacturer ‎RCBS
Material ‎Blend
Model Name ‎80025
Model Year ‎2012
Number of Items ‎1
Package Weight ‎0.9 Pounds
Part Number ‎80025-RCB
Size ‎One Size
Sport Type ‎Hunting
Suggested Users ‎Unisex-adult

3.5

8 Review
5 Star
74
4 Star
10
3 Star
9
2 Star
3
1 Star
4

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: P. D. Smith
Good quality but be mindful they won't fit everything as is.
I've always liked these handles, and really like Accurate Molds (just got my third, for my 45-70). The RCBS handle never had an issue out of the box before on these molds but as mentioned on Accurate's site, the newer molds appear to have had their holes drilled a bit smaller and it's possible they are in a slightly different position. As is, these no longer work with the mold, requiring a small boring of the handle holes, and possibly some minor filing to the handle itself. Some might not mind. For such a costly handle, not sure why they made the change and I'm going with the Lee 6 cav., though I prefer the RCBS in all other ways.
Scritto da: Hank D
Right mould, right handle.
RCBS bullet moulds are high quality, and it follows that their handles will be too. I have 4 sets with my favorite RCBS moulds mounted and ready to cast. The handles are solid, manufactured of thick plate stock. The hinge bolts have never worked loose, and the alignment has always been good. The only problem I ever experienced was a cracked wooden handle that caused a fertile to loosen. I contacted RCBS, and true to their word, they replaced the handles free. I've read elsewhere of casters using Lee handles with RCBS moulds to save a few bucks, but after a friend gave me a set of Lee handles, I examined them, and tossed them in the recycling bin. Recommended.
Scritto da: Joe
Only RCBS handles that work perfectly
These are the best. It doesn't matter what they tell you Lyman and Lee mold handles off a 2 or 6 cavity mold will NOT work with RCBS. Save the headache, buy these.
Scritto da: gunner
Would not buy these again
Compared to Lyman handles these are cheaply made. The clamp part is a laser cut and stamped part held together with a bolt. The Lyman are forged and riveted. The wood handles are way to long and look like they were cut from a broom handle. When you fasten a die to the handles they are very front heavy and hard to hold. If you look at the picture on site you can see how long they are. I bought these because I bought a used 44 mag mold that is RCBS and had no choice. I normally buy Lyman molds. Not happy but I will modify them to work better. RCBS normally makes a good product but I feel they cheeped out on these. And they are a lot more costly than other makes.
Scritto da: Vark Driver 1
Good product
A little pricey I thought but no other options for casting bullets with their moulds.
Scritto da: VEARL
Four Stars
JUST WHAT I NEEDED
Scritto da: Pen Name
bullet mould
I have not yet to use. I think is good when i have time to make bullet. This bullet mould look good quality.thank .
Scritto da: Goose Slayer
Important accessory
Works perfectly with the RCBS moulds. Well made handles.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array