LMT Onsrud 63-768 Canelură în spirală în spirală din carbură solidă, inci, finisaj neacoperit (luminos), elice de 21 grade, 1 canelură, lungime totală 2,0000, diametru de tăiere 0,1875, diametru tijă 0,2500 3/16 inci

Brand:LMT Onsrud

2.8/5

L
370.91

DESCRIEREA PRODUSULUI Greenlee angajează cu mândrie forța de muncă din Statele Unite în șapte unități de producție, unde proiectăm, asamblam și fabricăm anumite produse care îndeplinesc cerințele riguroase făcute în SUA sau declarațiile de calificare. Încurajăm consumatorii să consulte ambalajul produselor noastre sau materialele de marketing găsite pe greenlee pentru a înțelege originea anumitor produse. DE LA PRODUCĂTOR Multimetrul digital Greenlee DM-200 de 600 volți dispune de reglare automată pentru o funcționare convenabilă, detectarea tensiunii fără contact și pentru a vă economisi timp. Măsurători de păstrare și captare a datelor. Oprire automată și indicator de baterie descărcată. Capabil RS-232, poate fi conectat la un PC pentru o capacitate extinsă de măsurare cu interfața opțională izolată DMSC-2. Modul de afișare a decalajului relativ pentru a vedea modificările relative ale măsurătorilor. Măsurători de frecvență, temperatură și capacitate și ciclu de lucru AC. Accesoriile au inclus două baterii AAA de 1,5 volți, cabluri de testare și sondă de temperatură. 6000 de măsurare a tensiunii maxime.

Nu există unități disponibile
Flaut unic, unghi de 21 de grade. Când sunt rulate în sens invers acelor de ceasornic (tăiat pe dreapta), sculele cu caneluri spiralate evacuează așchiile în sus și în afara tăieturii pentru a reduce înfundarea. Tijele rotunde permit utilizarea cu o mare varietate de sisteme de fixare a sculelor. Uneltele neacoperite au doar substratul de bază, fără tratament suplimentar sau acoperiri și sunt potrivite pentru o gamă largă de aplicații. Sculele din carbură solidă oferă o durată lungă de viață a sculei și viteze de așchiere mai mari decât alte substraturi, dar sunt mai fragile și trebuie utilizate cu sisteme rigide de prindere a sculelor.
Country of Origin USA
Cutting Diameter 0.19 Inches
Cutting Length 0.63 Inches
Domestic Shipping Item can be shipped within U.S.
Finish Type Uncoated
Finish Type Uncoated (Bright)
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 63-768
Manufacturer LMT Onsrud
Material Carbide
Number of Flutes 1
Product Dimensions 4 x 0.5 x 0.5 inches; 0.8 Ounces

2.8

8 Review
5 Star
47
4 Star
18
3 Star
10
2 Star
9
1 Star
16

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: R. A. Jones
Nice cutter, shank is 1/4" despite the title and photo.
The title is a bit off because it says the shank is 0.125" when the specs say the shank is 1/4". The photo also shows a cutter with the shank diameter the same as the cutting diameter. It IS, however, 1/4" shank. I use it on a smallish CNC router with a 2hp spindle and it's worked quite well. In soft plastics like ABS I initially had the chip winding around the shank, melting and make a truly horrible cut. I built a new dust shoe to dramatically increase the air velocity around the cutter and with that dust shoe to keep the chips clear this cutter has worked very well.
Scritto da: Mississippi
Good bit
Nothing wrong with this one
Scritto da: Paul Haiducu
Arrived damaged!
I am not an expert in this, but the shop teacher I have worked with to drill holes in an aluminum plate tells me that the bit is damaged and cannot be used. Unfortunately, we have not carefully looked at the bit when it arrived (ordered on May 23, 2019), hence it is too late to return it or exchange it. It took the teacher a while to find time for the project I wanted done (we had the summer off, traveling, etc.). Yesterday, he realized that the bit is no good. The bit has not been used (and the shop teacher tells me that is obvious). These are not cheap, I am out almost $30.
Scritto da: Andrew D. Mowry
The description for this is incorrect. The 1/8” bit ...
The description for this is incorrect. The 1/8” bit has a 1/4” shank, not 1/8” as described and shown in the photo.
Scritto da: Seein Stripes
Great for HDPE on Bob's CNC E3
I now have about 20+ hours on the bit cutting and drilling .375" Starboard HDPE. I can say it is RAZOR sharp since it sliced my finger like a scalpel trying to remove some plastic shavings from around the bit. Runs straight and true at 45 ipm on my Bob's CNC machine.
Scritto da: Gary
This is the best bit I ever used on this material
I cut an aluminum composite material with this bit. The material is 2 aluminum skins bonded to a plastic center. This is the best bit I ever used on this material, a very clean, effortless cut.
Scritto da: Eric Varsanyi
Great cutter, clean edges on acrylic
This cuts acrylic like butter and leaves a very nice edge. I'm running a router at 18000 RPM with a feed rate of around 70 IPM and .06 depth cuts in cast acrylic.
Scritto da: bookbound93
Not 1/8 shank
Nice cutter, but needed a 1/8 shank and this is a 1/4 shank. Not happy.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array