Lanțuri de ploaie Monarch 20042 Adaptor pentru jgheab acoperit cu pulbere din aluminiu negru Instalare lanț de ploaie, standard

Brand:Monarch Rain Chains

3.7/5

L
198.89

Adaptor pentru jgheab Monarch din aluminiu negru acoperit cu pulbere pentru trusa de instalare a lanțului de ploaie, dimensiune standard, îmbunătățește fluxul de apă, reduce stropirea și îmbunătățește lanțul de ploaie. Se potrivește cu majoritatea jgheaburilor și vine cu o placă suplimentară de cupru pentru a se potrivi cu jgheaburi mai mari. Instalare ușoară care nu necesită instrumente.

Nu există unități disponibile
DIMENSIUNI GENERALE ARTICOLUL: Reductorul de jgheab cu lanț de ploaie măsoară 5” (L) x 3,5” (L) x (3)” H. Deschidere superioară 2 inchi, deschiderea inferioară 1,75 inci; Asigurați-vă că vă curățați jgheaburile înainte de a instala setul de adaptor pentru jgheab pentru lanț de ploaie pe lanțul dvs. de ploaie de exterior. INSTALARE Ușoară: Instalatorul de jgheaburi se atașează cu ușurință direct la partea superioară a lanțurilor de jgheab de ploaie. Șurubul din alamă de pe adaptorul pentru jgheab pentru lanț de ploaie mic are o canelură centrală pentru a atârna și a fixa lanțurile de ploaie pentru jgheaburi. SĂ MĂRĂȘTEȘTE ATRACȚIA PLUIELOR: Un instalator de lanț de ploaie, în combinație cu burlane de lant de ploaie pentru jgheaburi, oferă un aspect unic de bordură care va îmbunătăți aspectul casei tale. Completați aspectul adăugând unul dintre bazinele noastre de ancorare sau țăruși de ancorare. CONSTRUCȚIE DE CALITATE PREMIUM: Instalatorul de jgheab pentru lanț de ploaie este realizat din aluminiu cu un șurub din alamă pentru a agăța lanțul de ploaie. Setul pentru lanțuri de ploaie oferă o modalitate sigură și fără sudură de a agăța lanțurile de ploaie de jgheab. DESIGN FUNCȚIONAL: Adaptorul pentru lanț de ploaie este proiectat pentru a se potrivi în jgheabul de ploaie peste orificiul de scurgere unde există o burlană. Suportul pentru lanț de ploaie captează apa de ploaie și se micșorează pentru a direcționa apa din jgheab în burlanele de ploaie.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array