Klein Tools VDV001-081 Șurubelniță cu mai multe biți, șurubelniță cu perforare Unealtă multiplă în stil baionetă cu lamă rezistentă pentru depozitarea biților Instrument multiplu cu perforare fără impact

Brand:Klein Tools

3.5/5

L
288.22

Șurubelnița / șurubelnița cu piuliță multi-biți Klein Tools vă oferă confortul de a perfora manual cricurile de perete și panourile de corecție. Cu oțelul de scule prelucrat pentru o rezistență mai mare, acest produs vine cu biți multipli pentru a vă ușura munca. Arborele deține 4 vârfuri universale și se transformă în 2 dimensiuni de șofer și 1 șurub hexagonal. Excelent pentru utilizare pe 110 terminale/panouri de corecție și 66 de panouri de corecție. Instrument multifuncțional cu vârf unic la mufele și panourile de corecție. Varfuri crestate 3/16 si 1/4-inch; Sfaturi Phillips #1 și #2. Se transformă în șofer de piuliță de 1/4 și 3/8-inch și șofer hexagonal de 3/8-inch. Mâner Cushion-Grip pentru un cuplu mai mare și un confort sporit. Tip-Ident pentru identificarea rapidă a instrumentului. Două vârfuri de șurubelniță Phillips: #1 și #2. Două vârfuri de șurubelniță: 3/16-inch (5 mm) și 1/4-inch (6 mm). Două piulițe: 1/4-inch (6 mm) și 3/8-inch (10 mm). De mai bine de 160 de ani, Klein Tools a produs unelte de mână profesionale de calitate premium, care oferă performanța, durabilitatea și precizia necesare pentru a face treaba corect. Familia noastră de ingineri, muncitori și meșteri continuă să pună șase generații de experiență în fiecare unealtă pe care o creăm, folosind doar materiale de cea mai înaltă calitate, o manoperă superioară și menținând producția cât mai aproape de casă. Klein nu este doar numele companiei noastre, este și numele nostru de familie. Și din moment ce suntem o companie americană care este deținută și administrată de o familie, știți că puteți conta pe noi să fim aici mâine. Klein Tools nu face doar produse grozave, ci facem produse grozave care fac față cerințelor profesioniștilor care le folosesc în fiecare zi... Din 1857.

Nu există unități disponibile
Tip-Ident pentru identificarea rapidă a instrumentului. Mâner Cushion-Grip pentru un cuplu mai mare și un confort sporit. Priza tip baionetă (răsucire și blocare) acceptă majoritatea lamelor perforate ale producătorilor. Butoiul cu lame rezistente oferă depozitare pentru bucăți. Biți din oțel prelucrați cu mașină pentru o rezistență superioară. Terminare fără impact. Instrumentul multiplu pentru șurubelniță cu perforare termină și taie firul într-o singură etapă cu o lamă de tăiere combinată 110/66 și muchia sa de tăiere șlefuită de precizie.
Batteries Included? ‎No
Batteries Required? ‎No
Blade Length ‎3 Inches
Brand Klein Tools
Brand ‎Klein Tools
Color Multi
Color ‎Multi
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 654 ratings 4.5 out of 5 stars
Head Style Phillips
Head Style ‎Phillips
Included Components ‎VDV001-081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎8 x 1.5 x 1.5 inches
Item model number ‎VDV001-081
Item Package Quantity ‎1
Item Weight ‎0.3 Pounds
Item Weight ‎4.8 ounces
Manufacturer ‎Klein Tools
Material Blend
Material ‎Blend
Model Name ‎VDV001-081
Number of Handles ‎1
Number of Items 1
Number of Items ‎1
Number Of Pieces ‎1
Part Number ‎VDV001-081
Product Dimensions ‎8 x 1.5 x 1.5 inches
Size ‎One Size
Style ‎Multi-tool with Non-impact Punchdown

3.5

13 Review
5 Star
78
4 Star
9
3 Star
3
2 Star
4
1 Star
7

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Paul Sretavong
Got A Lot Of Use, But Broken Spring Like Others
Overall, this is a great punch down tool. But like other reviews, the spring in mine broke as well. I at least got about a years worth of daily usage before the spring gave out in the middle of a punch. For the price, you would expect it last longer.
Scritto da: John Miller
Punch down works
It doesn’t click like a normal punch down tool but great since I can’t find my other one and the cost is much less than a replacement ideal punch down. This might not be great for a big job but for one or two it’s awesome
Scritto da: Manuelita Irma Di Rocco
Neat tool
This was a recommendation by my son, who installs cable. I was intent of doing a job for myself without hiring someone to do it. This was a great handy tool to punch down the CAT wires into a wall ate which I had ran thru the attic from a router to an area I needed a hard wire outlet plate to be. Female determination.
Scritto da: Brandon barkley
Almost perfect
Would get a 5 out of 5 if the bits stayed in better..
Scritto da: James Greco
Best punch down tool I have used
Quality
Scritto da: Pattylew
The punch died.
After about 500 punches the spring died. Hopefully it's not just mine...
Scritto da: David M.
Well-made and mostly efficient tool
I bought this to install Cat6 and RJ11 Keystone jacks for our home network and a corded phone extension. It worked almost perfectly - just make sure that, when you're pushing down on the tool, you hold it at 90 degrees to the jack, otherwise it may either damage the small prongs in the jack or just not push the wire in properly. The integral wire cutter didn't always cut completely through the protruding wires, but they were easy to break off afterwards. It's a nicely-made tool (as usual for Klein), with a strong pouch to store it.
Scritto da: ARIZAI
Quality spring
Bought it a couple weeks ago . After a few days of work the spring gets jam every 2 to 3 punches down the line, very disappointed
Scritto da: GURUTECH
Perfect for what I need it for Quality is superb
Perfect for what I need it for Quality is superb
Scritto da: Dave P
nice looking punch down tool that does not cut it!
I run a data installation company with 4 skilled data engineers our existing krone tools are getting worn out with constant use around 1,000 per day we perchased 1 of these tools, to try out, as they have a good reviews in the states. the tool duly arrived i gave it to the engineers, try this and tell me what you think, well to say that they were NOT happy is an understatement, comments not fit to post here !!!! I have also tried punching with the klien tool i agree with my engineers the unit punches the cat7/cat6/cat5 really well BUT it does not cut the ears of the cables after punching into the krone point i did sent an email to the uk stockist but after a long wait still have not had a reply we have tested the punch tool with variouse units but it still does not pass the test fluke have a simular unit and it has the same issues not cutting i hope my review shakes some trees and a responce from klien toolsis forth coming
Scritto da: John S.
The tool is not as good as Klein make out.
The terminating tool for the Cat6 cable is useless.
Scritto da: Lyle
Will not last even 5000 punch downs.
I purchased this to replace my cheaper quality punch down tool. This lasted 1 year and a half, and the spring broke on the inside and won't punch down. I purchased thinking thr klein punch down was better, my so call cheaper quality had out lasted this klein tool. What a huge disappointment, will buy a different more quality brand. Do not purchase.
Scritto da: Don Thomson
Compression punch broke after only 8 months of use.
I'm in the cabling business - myself and my business partner both had this same tool and both failed almost at the same time due to the compression part of the tool breaking. The tool is only 8 months old. If it didn't break I would have likely given it 5 stars as it worked good up until now. I expected better from Klein Tools. Also the fact that another user and also my business partner had the same exact failure shows this is NOT a one-off defect, but an inherint defect with this punch tool. I have a back up that is not so nice on ergonomics, but it is over 10 years old and still working.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array