Kit de vehicul Pitsco Basic Mousetrap Vehicle (pachet individual) pentru 1 student

Brand:Pitsco

3.2/5

L
306.45

Setul Pitsco Balsa Wood Basic Mousetrap Vehicle oferă elevilor din clasele 6-12 o activitate practică pentru a proiecta și a construi un model de mașină care demonstrează concepte științifice, inclusiv viteza, forța, mișcarea și legile fizicii lui Newton și predă proiectarea inginerească. Elevii pot construi mașina din kit și pot modifica mașina pentru o performanță îmbunătățită și o viteză mai mare. Setul include o capcană pentru șoareci, piese din lemn de balsa lungi de 12 și 18 inchi, discuri compacte de dimensiuni standard pentru roți, distanțiere de roți, șaibe de tracțiune, bucăți de tuburi de alamă de 12 inchi, sfoară ultra-subțire și instrucțiuni. Kiturile Pitsco 57034 (pachet de 10 seturi) și 57035 (pachet de 30 de truse) includ, de asemenea, o copie a manualului, Mașini și bărci cu trapă de șoareci de la Doc Fizzix. Vehiculul finit măsoară aproximativ 4,5 x 5 x 26,5 inci (înălțime x lățime x adâncime). (H este înălțimea, distanța verticală de la punctul cel mai de jos la cel mai înalt punct; W este lățimea, distanța orizontală de la stânga la dreapta; D este adâncimea, distanța orizontală din față spre spate.) Un kit de vehicul capcană pentru șoareci este de obicei utilizat într-un cadru educațional pentru a demonstra inginerie și fizică. Construcția necesită lipici alb, riglă, cuțit pentru hobby, tăietor de sârmă și un burghiu sau unealtă Dremel (toate vândute separat). Produsele de educație științifică încorporează principiile aplicate de matematică și știință în proiectele de clasă. Profesorii din sălile de clasă pre-K, elementare și secundare folosesc truse și produse de educație științifică alături de curriculumul de știință, tehnologie, inginerie și matematică (STEM) pentru a demonstra concepte STEM și aplicații din lumea reală prin activități practice. Proiectele de educație științifică includ o gamă largă de activități, cum ar fi experimente practice în inginerie, aeronautică, robotică, energie, chimie, fizică, biologie și geologie. , truse educaționale și instrumente pentru clasă. Compania, fondată în 1971, are sediul în Pittsburg, KS. What’s in the Box? * Kit de bază pentru vehicule cu capcană pentru șoareci din lemn de balsa Pitsco * Capcane pentru șoareci (una pe mașină) * Piese din lemn de balsa (3 pe mașină) * Discuri compacte (4 pe mașină) * Distanțiere pentru roți (4 pe mașină) * Șaibe (4 pe mașină) * Tuburi de alamă (2 lungimi per mașină) * Snur ultra-subțire (1 lungime per mașină) * Un manual, mașini și bărci cu trapă pentru șoareci a lui Doc Fizzix (doar pachet de 10 și pachet de 30) * InstrucțiuniNotă: roțile din imagine nu sunt tipice, dar sunt un exemplu de modul în care elevii își pot picta și decora vehiculele.

Nu există unități disponibile
Vehiculul finit măsoară aproximativ 4,5 x 5 x 26,5 inci (înălțime x lățime x adâncime). Consolidează conceptele de tehnologie, inginerie și matematică pe măsură ce elevii modifică mașinile pe baza factorilor care influențează performanța. Expune studenții la procesul de proiectare și îi încurajează să experimenteze și să modifice vehiculul pentru viteză sau distanță mai mare. Include piese necesare pentru a construi un vehicul propulsat de o capcană pentru șoareci pentru predarea designului ingineresc. Trusa de vehicul capcană pentru șoareci din lemn oferă elevilor din clasele 6-12 o activitate practică pentru a proiecta, construi și modifica un model de mașină care demonstrează conceptele științifice de viteză, forță, mișcare și legile fizicii lui Newton.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array