Kit de inserții cu filet elicoidal E-Z Lok SK31020, oțel inoxidabil 304, dimensiune filet 3/8-24, lungime instalată 0,750 (pachet de 10)

Brand:E-Z LOK

2.5/5

L
385.96

E-Z Lok produce inserții filetate pentru metal, plastic și lemn. Compania are sediul în Gardena, CA.

KITUL INCLUDE - Setul convenabil include inserții filetate bobină pentru metal, burghiu, robinet STI, unealtă de instalare a inserției filetate și scule de rupere a curelei. PENTRU UTILIZARE ÎN APLICAȚII – Inserțiile filetate metalice sunt proiectate pentru a fi utilizate cu metale moi: aluminiu, fontă, magneziu, etc. Sârmă din oțel inoxidabil – Kitul include inserții filetate din oțel inoxidabil care sunt rezistente la coroziune și pot rezista la temperaturi de până la 800°F. REPARAȚI RAPID firele deteriorate – reparați rapid firele deteriorate sau consolidați găurile filetate din metalele moi cu acest kit de reparare a filetului elicoidal.
Brand E-Z LOK
Country of Origin United Kingdom
Fastener Type E
Item model number SK31020
Manufacturer E-Z LOK
Material Stainless Steel
Package Dimensions 8.39 x 4.69 x 1.26 inches; 8.8 Ounces
Size 3/8"-24 Thread Size, 0.750" Installed Length
Thread Size 3/8"-24

2.5

3 Review
5 Star
60
4 Star
0
3 Star
0
2 Star
0
1 Star
40

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Madelyn Chapman
Excellent Product
Worked perfectly - Saved me $1000, since I didn't have to replace the casting The thread that stripped out had a .5 counter-bore 3/8deep. Then the thread went another 1.25 inches. This was perfect, the tap didn't score the bore at all, and I was able to torque the bolt to the required specification. I will definitely use them again when I strip out another thread. Thanks, Sam
Scritto da: Joy Porter
Wrong size tap!
I ASSUMED that everything in the pack was correct, as it listed the tap as 3/8” x 24. I drilled the hole with the 25/64” bit provided and then tapped it with the tap. I then installed the thread coil. However, when I tried to thread the 3/8x24 bolt, it wouldn’t start. I then discovered the reason was the tap was 3/8x16! I couldn’t back the coil back out! My only solution was to try to retap the coil with my own 3/8x24 tap. This required several hours of time and literally destroyed my tap!!!!
Scritto da: Laurie M. Kiser
Best quality thread repair kit
I have done this process 2 or 3 times before with good results. The hardest part of the job is making the hole and tap straight. This kit has the highest quality tools and the new threads are 100 x stronger than original aluminum alloy. Drill bit is extremely sharp. The bit and tap seemed to self level making diy hand tools ok. Both of the repairs I did were perfectly straight in spite of me. The coil did need A LOT OF lubricant to install correctly. I had to use liquid assembly lube to get the coil to seat properly. Spray lube wasn't enough. Not the cheapest kit but totally worth the extra few dollars.

Produse asemanatoare

hot
3/5

L 317.23

3/5

L 317.23

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array