Frigidaire 316489406 Aprindere de coacere OEM originală pentru gătite

Brand:FRIGIDAIRE

3.6/5

L
860.14

DESCRIEREA PRODUSULUI Aprindetorul Frigidaire Bake Igniter de înaltă calitate (316489406) aprinde arzătorul de coacere. Aprindetorul de coacere este pentru cuptoare pe gaz și înlocuiește 1615396, AH2581803, EA2581803, PS2581803. Vă rugăm să rețineți că este recomandat să utilizați echipament de siguranță și să deconectați aparatul de la toate utilitățile înainte de orice service sau reparație. Vă rugăm să consultați manualul de utilizare pentru a confirma numerele de piesă și pentru instrucțiuni, deoarece unele reparații necesită un profesionist de service calificat. DE LA PRODUCĂTOR Aceasta este o piesă de schimb originală. Numărul de model și numele pentru următorul articol este: Frigidaire (FRIGB) 316489406 Aprindere cuptor

Cu Frigidaire, puteți fi sigur că veți primi caracteristici fără efort și materiale de calitate, oferindu-vă performanță de cea mai înaltă calitate pe toată durata de viață a aparatelor dumneavoastră. Aprindetorul Frigidaire de înaltă calitate înlocuiește 1615396, AH2581803, EA2581803, PS2581803. Frigidaire 316489406 este pentru cuptoare pe gaz. Frigidaire Bake Igniter aprinde arzătorul de coacere. Frigidaire Bake Igniter este o piesă originală OEM (Original Equipment Manufacturer) proiectată și realizată conform specificațiilor exacte.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 43 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎316489406
Item Package Quantity ‎1
Item Weight ‎4 ounces
Manufacturer ‎Frigidaire
Part Number ‎316489406
Product Dimensions ‎6 x 4 x 2.5 inches

3.6

8 Review
5 Star
78
4 Star
11
3 Star
6
2 Star
0
1 Star
5

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Tony C
Fixed the issue with my oven
My oven was preheating when we turned it on even though the igniter was getting hot. I replace the original igniter with this and it fixed the issue. The only thing I would recommend is to save the original one until you have this one installed in case the mount does not fit. That is the reason why I gave it four stars as the it is supposed to be a direct replacement but i did have to swap the mounting bracket.
Scritto da: seattleguy
Works for me. Took about 1 hour to replace, including moving out oven and putting back onto place.
The top oven of our double oven would not go above 100 degrees. I researched this and found that it was likely the bake igniter. I watched some youtube videos to learn how to replace it and decided to go ahead and try. It was as straight forward as I had expected. The most difficult thing for me to replace this part, for my oven (Kenmore model #790.78013002), was that it took some effort to pull the existing igniter out after removing the 2 screws that were holding it in place. This is because a) it required that I take off the back panel to undo the connection. b) Once I had the panel off and located the connection and disconnected it, it took a bit of effort to pull the wire out from inside the oven. There was some insulation in the way that I had to move over. c) i had to push the connector from the new igniter, through the back of the oven so I could connect it. Once it was connected, putting all screws back in place was easy. This new part solved the problem that I was having and now will heat up again.
Scritto da: Brian Blazevich
Fit Kenmore Elite Perfectly
I have bought cheaper versions that needed special installation. This one required no modification to shield nor wiring. Connector fit perfectly.
Scritto da: DKRemnant
As described works great, excellent shipping
As described works great, excellent shipping
Scritto da: John Galt
Absolutely perfect match!
The wires to the coupling must be cut and spliced back together. The opening in the oven chamber is not large enough for the coupling to pass through. There is a youtube video to assist with this process. Real simple but requires butt couplings or wire nuts.
Scritto da: Lisa
Perfect fit.
Cords and plugs are just right. I replaced both upper and lower igniters in the upper oven.
Scritto da: Harry Ng
Easy fix for Kenmore Elite
Easy replacement for my Kenmore Elite double oven. I didn’t have to cut any wires, simple plug!
Scritto da: Alan Wiltse
It works
The unit works just fine although I was expecting one that looked just like the picture... with a connector. It came with just bare wires and wire nuts. I cut the old ones wires above the connector so I could keep it just in case I had to replace it again with one that did have the connector on it.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array