Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Funcționează cu Alexa, Google Assistant, SmartThings, Wink, Zwave Hub necesar, Repetor/Range Extender, Compatibil cu 3 căi, 26933

Name: Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Funcționează cu Alexa, Google Assistant, SmartThings, Wink, Zwave Hub necesar, Repetor/Range Extender, Compatibil cu 3 căi, 26933
Brand: Enbrighten
SKU: 0030878269339
Price: 570.99 RON
Availability: InStock

Brand:Enbrighten

3.2/5

L
570.99

Puneți în mișcare automatizarea locuinței cu Dimmerul de mișcare inteligent în perete Enbrighten Z-Wave. Atunci când este asociat cu un hub compatibil, variatorul inteligent cablat activează plafonierele, corpurile de perete și multe altele prin comenzi individuale și setări programate. Controlați și programați fără fir corpurile de interior sau exterioare pentru gestionarea fără efort a casei dvs. Posibilitățile dvs. de automatizare sunt aparent infinite atunci când sunt conectate la hub-uri de la Wink, SmartThings, Home Seer, Vera, Nexia și multe altele.

Cantitate

Adaugă in coş Cumpără acum

EAN: 0030878269339

Categorii Uneli și îmbunătățiri pentru casă, Electricitate, Interuptoare și variatoare, Interuptoare de perete, Interuptoare cu variator,

INSTALARE Ușoară – Necesită instalare în interior în perete cu conexiuni cablate. NECESAR SĂRMAR NEUTRE. Include butoni de acoperire alb și migdal deschis (placa de perete nu este inclusă). Capacitate de reglare cu gamă completă pentru utilizarea cu LED-uri și CFL-uri reglabile, precum și cu becuri cu incandescență și cu halogen. Puterea suportată – 600W incandescent; 150W LED/CFL. Tensiune suportată – 120VAC. Interval de temperatură de funcționare 32-104 grade Fahrenheit. ACOPERIRE COMPLETĂ A CASĂ – Z-Wave Plus funcționează cu toate generațiile anterioare Z-Wave pentru a permite extinderea continuă a rețelei dvs. de automatizare a locuinței. Dimmer-ul este capabil să controleze corpurile de interior sau exterioare pentru automatizarea întregii locuințe și repetă semnalul Z-Wave de la hub sau alte dispozitive pentru a vă extinde raza de acțiune cu până la 150 de picioare. Gama extinsă a semnalului mărește acoperirea automatizării casei pentru a vă îmbunătăți controlul. PREGĂTIT ÎN 3 CĂI – Dispozitivul inteligent funcționează perfect singur sau se integrează perfect în configurații cu mai multe comutatoare cu comutatoare suplimentare necesare – modelele 12723 sau 46199. La același dispozitiv pot fi conectate până la patru comutatoare suplimentare. SELECTARE CONTROLUL MIȘCĂRII – Dimmerul reglează nivelurile de luminozitate ale luminilor cu LED, CFL, incandescente și halogen reglabile de la 0 la 100 la sută pentru a reduce costurile cu energie și pentru a îmbunătăți durata de viață a becului. Personalizați variatorul cu trei opțiuni de detectare a mișcării - ocupare, post liber și manual. Modul de ocupare pornește/oprește automat luminile, în timp ce luminile sunt aprinse manual și stins automat în setarea postului liber. Pentru a dezactiva senzorul de mișcare, selectați operarea manuală. Cu cinci opțiuni de durată de time-out, care variază de la cinci secunde la 30 de minute și o acoperire de detectare de până la 180 de grade, dimmer-ul se potrivește oricărei încăperi cu cantități diferite de activitate. În plus, bucurați-vă de scene personalizate, de programare versatilă și de alerte convenabile cu operare de la distanță și control vocal atunci când sunteți conectat la un hub compatibil. CONTROL VOCAL – COMPATIBIL ALEXA ȘI GOOGLE ASSISTANT (necesită un hub certificat Z-Wave). Funcționează cu următoarele hub-uri certificate Z-Wave: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera și multe altele.

Actuator Type	Push Button
Actuator Type	‎Push Button
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Enbrighten
Brand	‎Enbrighten
Circuit Type	3-way
Circuit Type	‎3-way
Color	‎White & Light Almond
Connectivity Protocol	‎Wi-Fi, Z-Wave
Control Method	‎Voice
Controller Type	‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin	‎China
Customer Reviews	4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components	‎1 In-Wall Sensor
International Protection Rating	IP00
International Protection Rating	‎IP00
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.5 x 1.5 x 3 inches
Item Dimensions LxWxH	‎1.5 x 1.5 x 3 inches
Item model number	‎26933
Item Package Quantity	‎1
Item Weight	‎7 ounces
Manufacturer	‎Jasco Products Company, LLC
Mechanical Life Expectancy	‎2 years
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	ON-OFF
Operation Mode	‎ON-OFF
Part Number	‎26933
Product Dimensions	‎1.5 x 1.5 x 3 inches
Size	‎Dimmer
Style	‎Motion Dimmer
Switch Style	Motion Dimmer
Switch Style	‎Motion Dimmer
Terminal	Spdt
Terminal	‎Spdt
Unit Count	‎1.0 Count
Upper Temperature Rating	‎40 Degrees Celsius
Warranty Description	‎2-Year Limited Warranty
Wattage	‎600 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Corey

Works well, a bit pricey

The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.

Scritto da: Scott Reston

Great switch for half-bath, good Home Assistant support

Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.

Scritto da: RAF

Got to know what you are doing :)

I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!

Scritto da: Pierce Thomas

Works well, would recomend if a motion switch is needed.

I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other