Element de fixare greu de găsit 014973211714 Șuruburi plate Phillips Tapcon, 1/4 x 1-3/4-inch, 25 buc.

Brand:Hard-to-Find Fastener

3.5/5

L
153.25

Avem o mare varietate de elemente de fixare ideale pentru multe aplicații în casă, fermă, afaceri, auto și industrie. Majoritatea elementelor noastre de fixare au o placare ușoară cu zinc peste oțel, oferind un finisaj mai rezistent la rugină. De asemenea, vindem produse acoperite și inoxidabile pentru rezistență suplimentară la rugină. Avem în stoc multe clase de elemente de fixare, de la oțel cu conținut scăzut de carbon până la oțel întărit, tratat termic. Nu toate elementele de fixare sunt aplicabile pentru toate aplicațiile, așa că asigurați-vă că testați temeinic și obțineți părerea unui constructor autorizat sau a unui inginer autorizat de construcții sau de structură înainte de a vă baza pe aceste elemente de fixare pentru orice situație în care defecțiunea ar duce la pagube proprietății sau persoanei.

Stil cap: plat (Phillips). Finisaj: Blue Ruspert. Material: Otel. Lungime: 1-3/4 inch. Diametru: 1/4. Stil cap: plat (Phillips). Finisaj: Ruspert albastru. Material: Otel. Lungime: 1-3/4 inch. Diametru: 1/4 inch.
Drive System Phillips
Exterior Finish Steel
Head Style Flat
Item Dimensions LxWxH 4.25 x 2.62 x 1.25 inches
Item model number 014973211714
Manufacturer Hard-to-Find Fastener
Material Steel
Product Dimensions 4.25 x 2.62 x 1.25 inches; 4.94 Ounces

3.5

8 Review
5 Star
72
4 Star
11
3 Star
8
2 Star
4
1 Star
5

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Chris K
Good alternative to the major brand
Just used these in a concrete slab, worked as expected after drilling the proper size hole. My only issue is that the blue coating on the screws was pretty thick on a few (I had three that were not usable) of the screw heads, which prevented the screwdriver head from inserting far enough to get a good hold to tighten the screw, it started to tighten, but as soon as you needed any real torque the bit would start slipping in the screw head. Most of the screws were not like that, and worked perfectly. I anticipated using all of these screws for my project, but unfortunately could not use them all.
Scritto da: cfc
Couldn't find this exact size in local branches of HD or Lowes
I screwed them in using my 1450 Nm torque impact driver. No issues at all. (I mention this because with this driver I have unwillingly destroyed many screws over the years, including ripping off entire screw heads)
Scritto da: Theodore Lancia
The item wasn’t in the bag yesterday, it was today 9/6/20
The amazon envelope was empty yesterday, it was re delivered today and my box of screws were in there. Thank you so much for correcting the problem. You people are wonderful. They were little concrete screws that are hide to find. Thanks again and god bless you all for your hard work. 9/6/20
Scritto da: Robert W
Ok had some heads snap off a few of them.
All conditions the same with each screw but had the heads snap off a few of them. Could of been me or the quality of screws has just become terrible over the years. It seems to happen more and more.
Scritto da: Edmund
They work
We were getting ready for a hurricane and I was fairly sure the local stores would be wiped out of these. I ordered these and they came right away (thank you Prime). I put up plywood for my place and the neighbors too, no problems with these at all.
Scritto da: melvin artis
Dependability
No screwing around!,these worked just fine for me.
Scritto da: Jeremy
Predrill holes at least an inch longer than the screws
Make sure you predrill holes deep enough, the heads broke off of 4 different ones, leaving the rest of the screw exposed. I had to use vice grips to get the broken parts out, then drill deeper into the concrete foundation
Scritto da: Heidi
Great fastener for a tough task.
Secured granite table tops and counters to frames...bite so easily and strong.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array