CURT 56365 Cablaj remorcă personalizat cu 4 pini pentru partea vehiculului, se potrivește cu Honda Pilot selectat, Ridgeline

Brand:CURT

3.3/5

L
512.34

Conectorii de cablare personalizat CURT sunt cel mai simplu mod de a vă echipa vehiculul cu o conexiune de cablare CURT pentru remorcă. Sunt construite cu unele dintre cele mai avansate tehnologii din industrie și fiecare este personalizat pentru a funcționa cu o anumită marcă și model. Unii producători de automobile instalează o priză specială pe vehicul pentru a fi utilizată pentru cablarea vehiculului la remorcă. Deși această priză specială nu este echipată pe fiecare vehicul, un conector de cablare personalizat CURT -- numit și conector T -- utilizează priza pentru o instalare simplă, fără stres. În loc să vă solicite să tăiați, să îmbinați și să lipiți sistemul de cablare al vehiculului dvs., conectorul de cablare personalizat utilizează o singură fișă compatibilă cu OEM și oferă instantaneu o conexiune standard, universală, de la vehicul la remorcă, de obicei sub forma unui cablu cu 4 căi. apartament. Toți conectorii de cablaj personalizat CURT sunt fabricați specific vehiculului pentru cea mai ușoară instalare posibilă și cea mai bună potrivire. Acest conector special oferă o priză plată cu 4 căi și este conceput pentru a fi o opțiune de cablare personalizată pentru anumiți ani a Honda Pilot și Ridgeline (este necesar pachetul de remorcare din fabrică; pentru a verifica compatibilitatea vehiculului dvs., consultați informațiile despre aplicație). Vine cu tot hardware-ul necesar pentru a stabili o conexiune solidă. De asemenea, vine cu un capac de praf pentru a menține mufa conectorului curată atunci când nu este utilizată. Pentru a asigura fiabilitatea de lungă durată, toți conectorii de cablaj personalizat CURT sunt testați temeinic pentru funcționalitate optimă. Stresul este ultimul lucru pe care ar trebui să-l simți atunci când tractați o remorcă -- fie că vă transportați RV către acea destinație preferată de camping, ATV-urile până la locurile de vânătoare sau barca de pescuit către noul hotspot ascuns. La CURT, credem că echipamentul dvs. de remorcare ar trebui să contribuie la plăcerea experienței dumneavoastră, nu să o diminueze.

CAPACĂ DE PRAF. Pentru a promova utilizarea de lungă durată și rezistența la intemperii, acest cablaj cu 4 poli de iluminare a remorcii vine cu un capac de praf din cauciuc. Se potrivește cu ușurință pe conectorul plat cu 4 căi atunci când nu este utilizat, protejându-l împotriva elementelor exterioare. PUTERE DE FINE. Acest cablaj de remorcă cu 4 căi este construit cu tehnologie de montare pe suprafață. Acest tip de circuite generează mai puțină căldură, intensitate optimă a luminii și performanță durabilă. SPECIFICE VEHICULUI. Acest cablaj de piață de schimb, vehicul-remorcă, este proiectat pentru anii selectați de Honda Pilot și Ridgeline (este necesar pachetul de remorcare din fabrică). CONECTOR STANDARD. Acest cablu de remorcă cu 4 plăci poate fi folosit pentru a conecta luminile spate ale remorcii, luminile de semnalizare de frână și semnalizatoarele de direcție. Cablajul luminii remorcii cu 4 căi este popular pe o mare varietate de remorci, adăugând opțiuni versatile de remorcare pentru vehiculul dumneavoastră. UȘOR DE INSTALAT. Fără tăiere! Fără îmbinare! Acest kit cablaj remorcă se conectează la cablajul existent din fabrică pe vehiculul dvs. și îl echipează cu un conector standard de cablare a remorcii cu 4 pini din spate pentru conectarea și tractarea unei remorci.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 87 ratings 4.2 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56365
Item Weight 0.84 Pounds
Item Weight ‎13.4 ounces
Manufacturer ‎CURT
Manufacturer Part Number ‎56365
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56365
Product Dimensions ‎9 x 6 x 3 inches

3.3

8 Review
5 Star
70
4 Star
9
3 Star
5
2 Star
4
1 Star
11

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: D
need update for Ridgeline missing fuses and directions incomplete
While the it appears to be a good value and is not that bad to install. Directions need to be updated for Ridgeline 1. Picture of where to plug the Custom harness into behind the rear seat. You have to reach way up there and just feel for it to pull it down to expose it. 2. While I have the breaks/turn/hazard lights working the tail/running lights will not come on. It also appears that not all fuses needed are included . It’s looking like I will need to get 2 more 20A fuses to fill out the entire fuse box. Picture of the fuse box has all fuses installed but the kit does not include all the fuses required. Picture shows a yellow 20A fuse in position 3 but directions say to use a 10A Also picture from mfg website on directions shows all fuses installed. Yellow = 20A Red = 10A Brown = 7.5A I have a 2019 Ridgline RTL 2 Wheel drive (FWD). See the included pictures of fuse boxes One from Website of mfg and one from my 2019 Ridgeline Now I am going to get some more fuses and see if that fixes it to make it look just like the picture of the installation manual. From mfg website. Which is in color Includes Printed directions are in black and white I found this on a forum, looks like there is a wire harness problem from honda perhaps where Running lights will not come on . ----------- My 2017 Ridgeline Touring AWD has the the 7 pin trailer plug. Without the vehicle running and no park or headlights on, there is dc power on one terminal only of the truck connector. When the vehicle is running, my utility trailer (factory made) lighting works fine except for park lights. Re, the trailer.... brake lights, turn signals all work fine in conjunction with what the Vehicle is doing except: the park lights as well as license plate light do not energize when the vehicle's park or head lights are on. What I have done temporarily (until I figure it out) is connect that one dc supply on the factory installed 7 pin trailer connector, to the side marker lights and license plate to make them work. Ergo, the side lights of the trailer energize whenever I start the vehicle and connect the trailer harness, but only because I've connect those trailer side lights wire to that one constant dc power source in that connector. I'm not a newbie to electronics, dc lighting or mechanical. Being doing it for 40 years. Any body else notice this issue? Thanks John Interesting John. I just got to the bottom of my problem, which sounds like yours. (2017 Ridgeline RTS). My neighbor completely re-wired the livestock trailer and when we tested it yesterday, everything worked except the running lights (the lights that are on when the lights are on in the truck). We diagnosed the problem to be in the plug, since when we plugged the same wiring harness (7 to 4 also) into a different truck, all lights worked. My mechanic spent more than an hour this morning and finally fixed the problem. Two wires in the Honda plug (where I plug in my 7 to 4 wiring harness to the trailer), were apparently switched at the factory. He called Honda to get a new plug and was told that they are back-ordered. To fix the problem, he switched the 2 wires himself and now all the lights work, including the running lights (you could call them the tail lights, also). My guess is that my plug came defective from the factory in Alabama. Is that your guess also? My question is was there a recall on this problem? Was it all 2017 models? Thanks, Lee in Iowa
Scritto da: Brandon loco
Are your running lights not working on your Honda Ridgeline with the Curt wire harness?
Everything was pretty simple with the kit except the instructions are a little bit off. I have a 2017 Honda Ridgeline front wheel drive vehicle. I installed per the instructions and my running lights on the trailer wouldn't work. These are the changes that should happen IMO. 1.) It says to route the 4 way connector to the trunk but no way is that possible on this vehicle. With the black wire protector it fits great kinda pinched between the plastic on the bottom near the hitch, that way it can easily slip out or stay up when not in use. 2.) VERY IMPORTANT!!! The instructions say use fuse 3 and 6, the diagram has an arrow pointing to fuse 7 (WHY???). I had to use fuse 6 and the fuse that went into 3, I placed in spot 9 and that got my running lights working. I'm not sure what fuse 3 is for but in my circumstance it wasn't needed.
Scritto da: Amy
Very easy to install
The instructions were perfect and easy to follow. The lights worked great without any issues. I installed them on a 2009 Honda Pilot.
Scritto da: Jason
Easy trailer wiring kit
Directions are accurate and install took 20 minutes. Harness worked perfectly. Only gripe if at all is the lack of mounting bracket for the flat 4 plug. I would have paid more if it was included
Scritto da: Aisa
It did not work on my 2010 pilot
Installed it as directed, but it did not work. I then returned it and bought the tow ready T-one 118491 and it works.
Scritto da: Kenneth Laird
The product was eventually made to work, but information ...
The product was eventually made to work, but information I found in another user's review proved to be crucial in getting it to. I think the manufacturer should have known that for the product to work, fuses had to be already in place in certain locations in the engine bay fuse box. This is a very specific use case product, 2017 Honda Ridgelines and earlier model Pilots. Updates and notifications should have been all over their website about this since getting printed instructions updated is not feasible.
Scritto da: GK
Great Product, does what it needs...
Worked Great for 2010 Honda Pilot. Instructions and all was good. Product works as expected. thanks
Scritto da: Amazon Customer
2011 Honda pilot
Works great with my honda pilot. Easy to install with just a few tools.

Produse asemanatoare

hot

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array