CURT 56127 Cablaj de remorcă personalizat cu 4 pini pentru partea vehiculului, pentru anumite Mitsubishi RVR, Outlander Sport, Lancer, negru

Brand:CURT

3.6/5

L
532.06

Dacă vehiculul dumneavoastră nu este echipat cu cabluri pentru tractarea unei remorci, cablarea personalizată CURT este soluția ideală. Un cablaj personalizat -- numit și conector T -- este un dispozitiv electric simplu, plug-and-play, care se conectează la sistemul electric al autovehiculului și oferă o conexiune standard, universală de cablare a remorcii. Acest lucru se realizează folosind doi sau mai mulți conectori compatibili OEM specifici vehiculului pentru a se conecta la ansamblul farului din spate, eliminând nevoia de tăiere, îmbinare și lipire în timpul instalării. Cablurile personalizate sunt create pentru vehicule specifice și, deși nu sunt disponibile pentru toate vehiculele, oferă una dintre cele mai rapide, mai ușoare și mai sigure modalități de a cabla un vehicul pentru remorcare. Acest cablaj special furnizează un conector plat cu 4 căi și este proiectat pentru a fi un cablaj personalizat pentru a se potrivi anumitor ani de Mitsubishi RVR, Outlander Sport și Lancer (pentru a verifica compatibilitatea vehiculului dvs., consultați informațiile despre aplicație). Vine cu toate componentele de cablare necesare pentru a stabili o conexiune fiabilă a cablajului remorcii, precum și un capac de praf pentru a menține conectorul curat atunci când nu este utilizat. Ai în minte o imagine a următoarei destinații -- poate că este barca care aterizează la locul tău preferat de pescuit, poate este un loc de campare care are vedere la una dintre capodoperele naturii sau poate este următorul mare șantier. Cu toate acestea, transformarea acelei imagini într-o realitate necesită mai mult decât visarea cu ochii deschiși. Este nevoie de o conexiune solidă și de cantitatea potrivită de putere. Cablajul personalizat CURT este realizat cu una dintre cele mai sofisticate tehnologii din industrie și este conceput pentru a fi instalat cu ușurință, oferindu-vă o conexiune electrică de lungă durată pentru configurarea cârligului de remorcare.

CAPACĂ DE PRAF. Pentru a promova utilizarea de lungă durată și rezistența la intemperii, acest cablaj cu 4 poli de iluminare a remorcii vine cu un capac de praf din cauciuc. Se potrivește cu ușurință pe conectorul plat cu 4 căi atunci când nu este utilizat, protejându-l împotriva elementelor exterioare. PUTERE DE FINE. Acest cablaj de remorcă cu 4 căi este construit cu tehnologie de montare pe suprafață. Acest tip de circuite generează mai puțină căldură, intensitate optimă a luminii și performanță durabilă. SPECIFICE VEHICULUI. Acest cablajul de cablaj al vehiculului-remorcă de pe piața de schimb este proiectat pentru anumiți ani ai modelelor Mitsubishi RVR, Outlander Sport și Lancer. CONECTOR STANDARD. Acest cablu de remorcă cu 4 plăci poate fi folosit pentru a conecta luminile spate ale remorcii, luminile de semnalizare de frână și semnalizatoarele de direcție. Cablajul luminii remorcii cu 4 căi este popular pe o varietate de remorci, adăugând opțiuni versatile de remorcare pentru vehiculul dumneavoastră. UȘOR DE INSTALAT. Fără tăiere! Fără îmbinare! Acest kit cablaj remorcă se conectează la cablajul existent din fabrică pe vehiculul dvs. și îl echipează cu un conector standard de cablare a remorcii cu 4 pini din spate pentru conectarea și tractarea unei remorci.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 142 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56127
Item Weight 1.73 Pounds
Item Weight ‎1.73 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56127
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56127
Product Dimensions ‎9 x 6 x 3 inches

3.6

13 Review
5 Star
71
4 Star
19
3 Star
4
2 Star
2
1 Star
4

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: john zawistoski
Watch car fit,
Was a good quality, but did not fit my car for the year made.
Scritto da: Daniel
Easy to Install!
Overall it’s an easy installation. however you will find running the cable to the battery a little tricky but not super hard if you are resourceful.
Scritto da: James Houghton
Mostly easy to install, except the 12V battery cable
I got this for a Mitsubishi Outlander Sport. The connections to the existing brake light connectors was easy and the instructions were very clear. Mounting the controller was also easy and it is nice that this kit comes with everything you need. The only weird thing was the battery connections wire. If I ran it through the passenger cabin from the trunk area to the front, there was no clear place to get a wire into the engine compartment without a lot of work. Fortunately I was able to poke it through a rubber grommet in the rear compartment and run it under the car to the battery. There were enough zip ties included to secure the cable from the rear to the front adequately, but I would recommend adding a few additional zip ties just to be sure. The controller worked perfectly when I connected it to my trailer and despite the extra work in getting it installed, I am quite happy with the results.
Scritto da: Wade
Works great
Works exactly as I would've hoped, installation was a bit hard, the interior panels in the trunk had to be removed, and I had to come up with my own power source in the trunk for the wires, it would've been very hard to get a power wire from the trunk to the battery like the instructions say. I had no plans of drilling holes in the car. Overall works great to run the lights for our jetski trailer
Scritto da: Chad R Baxter
Complicated Install
Makes you run a power wire from the battery all the way to the back of the vehicle for power, shouldn't be a need for this. Should draw power from the tail lights you splice into
Scritto da: C. Lane
Simple to install and works!
Hardest part was running wire to battery, everything else is plug and play!
Scritto da: jim
Great product
Great product
Scritto da: Todd Whipple
Plug and play EXCEPT for the wire to the battery.
As noted in other reviews, the instruction don't provide anything for running the power cable to the battery, which take twice the time as all the rest of the attachments, accomplished in 45 minutes. This is the only reason I didn't give it 5 stars. It would have been much worse if I wasnt able to jack the car up (2014 Mitsubishi Outlander Sport). I looked at the possibility of running under the base boards, but that looked like even more work and I could locate a place under the dash to easily run the wire.
Scritto da: jonathan ml
Works great for my 14’ Lancer
Installed it in a rush before a trip. Took 30 minutes to install, instructions are a bit too generic because my Lancer had the plugs on the right and left side instead of only on the left side. You do not need to remove the taillight assembly on these car, skip this step on a Lancer. Double sided tape was so old it was not sticky anymore. All over I like it because it was easy to install. I decided to wire the battery wire to a cigarette plug instead of trough the engine bay and to the battery directly. Con’s: Sticky tape was bad, wrong instruction for a lancer, routing the batt wire will be a pain trough the firewall.
Scritto da: bob
wireing
very nice working well just the black wire from front of battery to the box a big job taking all the trims off a and passing the firewall but for the rest its ok
Scritto da: Begoodjohnny
Easy install
Easy install, fit perfectly. Working great!
Scritto da: Dalton Russell
Works great, easy install besides running a power wire from the battery
Works flawlessly, the install is simple and easy with the exception of running a power wire from the battery. Would have preferred not to have to run power from the battery but it is what it is.
Scritto da: Daniel Caron
great product
works on my 2015 RVR, easy to connect, everything included :) the only downside, is to run a Power from the battery to the trunk. installation time, approx 45 mins.

Produse asemanatoare

hot
Ansamblu de sârmă
0.1/5

L 852.92

Ansamblu de sârmă
0.1/5

L 852.92

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array