CURT 19101 Cârlig pentru rulotă pentru bara de protecție RV de 2 x 4 inchi, receptor de 2 inchi, 3.500 lbs

Brand:CURT

3.4/5

L
805.96

Un cârlig CURT RV este un cârlig de remorcă care este proiectat să se monteze pe spatele unui vehicul de agrement pentru a adăuga spațiu suplimentar de încărcare. Aceste cârlige sunt fabricate folosind procesele de calitate CURT de sudare robotizată, curățare temeinică și finisare precisă. Dispozitivele noastre de bara de protecție pentru RV sunt acoperite cu un strat A lichid urmat de un strat de pulbere negru lucios pentru rezistență laser împotriva uzurii și coroziunii și oferă o deschidere a tubului receptor 2 x 2. Acest cârlig special pentru bara de protecție are o capacitate de greutate brută a remorcii de 3.500 lbs. și o capacitate de greutate a limbii de 350 lbs., făcându-l o alegere excelentă pentru tractarea unui suport de biciclete, transport de marfă, remorcă de barcă sau remorcă utilitare mică în spatele RV-ului dumneavoastră. Poate fi folosit și pentru tractarea unei remorci pentru vehicule de agrement, permițându-vă să aduceți cu dvs. acel ATV, ambarcațiunea personală, bicicleta de pământ sau orice jucărie doriți să aveți la plimbare. Asigurați-vă că verificați întotdeauna greutatea brută a remorcii și greutatea nominală a barei de protecție înainte de tractare. Câștigurile CURT RV nu sunt doar un alt accesoriu pentru rulota dvs.; sunt un produs de inginerie inteligentă și construcție de calitate pentru a vă ajuta să obțineți acea experiență RV supremă de fiecare dată când porniți la drum.

UȘOR DE INSTALAT. Instalarea acestui cârlig de remorcă pentru rulotă este rapidă și ușoară. Se fixează în siguranță pe aproape orice bară de protecție RV de 2 inchi x 4 inci cu hardware-ul de gradul 8 inclus și de obicei doar câteva instrumente. RUGINA, CHIP, REZISTENT LA UV. Acest cârlig pentru bara de protecție pentru rulotă este protejat cu un strat dublu de strat A rezistent la rugină și un strat de pudră negru extrem de durabil. Finisajele sunt co-întărite pentru o rezistență excepțională la rugină, ciobire și razele UV. COMPLET TESTAT. Fiecare model de cârlig pentru rulotă CURT este testat la unitatea noastră de inginerie din Detroit conform standardelor SAE J684 pentru cea mai mare siguranță și fiabilitate în timpul remorcării. DESIGN VERSATIL. Acest RV cu cârlig de remorcă echipează rulota dvs. cu un receptor standard de cuplare de 2 inchi x 2 inchi, permițând o mare varietate de opțiuni de remorcare. Poate accepta un suport cu bilă, un suport de marfă, un suport pentru biciclete, un cârlig de remorcare și multe altele. FORTA DE PIEDERE. Acest cârlig de remorcă RV este evaluat pentru 3.500 lbs. greutatea brută a remorcii și 350 lbs. greutatea limbii (limitată la componenta de remorcare cu cea mai mică valoare).
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.3 4.3 out of 5 stars 231 ratings 4.3 out of 5 stars
Exterior ‎GLOSS BLACK POWDER COAT
Finish Type GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer ‎No
Item model number ‎19101
Item Weight ‎12.62 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎19101
Material Carbon Steel
Model ‎RV Bumper Hitch
OEM Part Number ‎19101
Product Dimensions ‎11 x 9 x 6 inches
Vehicle Service Type Marine-Personal-Craft, Off-Road-Motorcycles, ATV, Trailer

3.4

13 Review
5 Star
69
4 Star
11
3 Star
8
2 Star
5
1 Star
7

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Matt Rosario
Didn't fit my bumper, believe the part was defective
Did not fit my bumper. I believe it was defective (poor quality control). There were weld beads that ran to the inside of the mount that sat against the bumper that prevented the bolts to align with the holes. The product seemed sturdy and able to hold a good amount of weight, if only I could have used it. I sent the item back for a refund with zero issues.
Scritto da: Doug
Very Nice for Camper hitch
We bought this and attached it to the Y frame on the front of the camper. We use it to store our weight distribution hitch so that is does sit in the truck. We lock it in and it is out of the way.
Scritto da: Amazon Customer
Cut to Fit
This is an update to my original review. I originally returned the Curt camper hitch in the hope of finding something that fits better. Failed in that goal and rebought the item. Had to seriously modify the hitch to fit it on my aluminum camper trailer. (I only need it to store my truck's bed extender.) Using a angle grinder to cut the hitch down to fit was actually the easy part. Drilling new holes in the very thick steel was non-trivial. Think it will be fine.
Scritto da: Richard Lindley
Saved me big bucks!!!
If you are mechanically inclined this will work on a Highlander bumper. Drilled the aluminum bumper slipped this right in place trimmed the bumper cover been hauling trailers ever since. You don't need a converter switch installed under your dash either or a fuse in your fuse box. Your lights will go onto a line that will always have power as long as the switch is on. Find your signals and your break. That's it you will always have daytime running lights but saves you the time and money for the converter that will pulse your lights. This is because most vehicles don't have a separate signal light like the highlander. Most vehicles pulse the taillight for the signal already.
Scritto da: aric kane varner
Great Receiver for Trailer!
I took and cut this down and re-drilled the top holes to fit the 2"x3" rear cross rail at the back of my boat trailer. Added a pigtail to the back of the boat trailer to plug the ski trailer into for the lights. Now I can pull my jet ski behind my boat like a champ! I ran that boat/ski trailer combo all summer long at 80 mph! No problems whatsoever! Heavy duty construction! Nice black finish! Well built product! Very pleased!
Scritto da: josh warren
Fits a Boss plow crossmember on a 2015-2019 GM HD pickup!
After I had my plow installed I wasn't thrilled about losing my front receiver. I measured the plow crossmember and guessed that this would fit, and I guessed right.
Scritto da: RickieDean
Just what i needed
I installed this hitch on the back of my Toy Hauler Travel Trailer to carry our Bicycles,the Curtis hitch is very well maid, easy to install and allows me to use my hitch bike rack,Love it.
Scritto da: Poolplayer
Description is Misleading - 4"x2" bumper
I wanted to leave this information so others won't be as confused about this product as I was. I was very hesitant to order this as I was looking for a camper bumper hitch to be used for a bike rack. My camper bumper is 4" high by 2" deep. Most rv bumper hitches are for a 4"x4" bumper and this one (Curt 19101) on Amazon and most other web sites that sell this, specify it will fit a 2" square channel bumper. This description in wrong as it fits and is made for my 4"x2" bumper!!!!! Chalet Arrowhead Very solid product and as always, Amazon Prime shipping was fast, showed up next day!
Scritto da: ken
Quality
Great quality and easy to install.
Scritto da: Ryan K.
Great hitch
Bought for a bike rack on my 2x4 C channel bumper on my camper trailer. Very heavy duty hitch... Way more than I needed. Had to do some minor modification to my bumper for it to bolt on properly. For the price, it wasn't worth sending back and only cost a few bucks to do the modifications to make it fit. Great product.
Scritto da: Mike M
Great addition to our trailer for carrying accessories
Works great to add a bike rack to our pop up trailer
Scritto da: Dave Pringle
Worked for me, a cheap alternative
I bought this hitch for a 2014 Mitsubishi Mirage, not to use to pull anything but as a means of being able to mount a 'load extender' type of thing onto the hitch and thereby help carry kayaks and canoes. I'm sure it will also come in handy on trips to the lumber store etc. The problem everyone who will have done this knows, is that mounting a kayak or canoe to a roof rack requires a person to twist their back around in a way that can cause a problem, especially when you get to my age. With an extender, one can tip up the front of the canoe/kayak onto the bar and then slide it forward onto the vehicle. I have not as yet tried this but am looking forward to using this new system!
Scritto da: maryse
Very solid !
I found this piece to be excellent and well made. It didn't suit us for what we needed it for but I definately recommend it if you have the right size bumper.

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array