Crimper Pro'sKit 300-173 CrimPro pentru LMR400 Hex Dimensiuni .118 și .429, Multi

Brand:Pro'sKit

3.2/5

L
444.67

Opțiuni de fixare a ușii convenabile și accesibile. Ușor de instalat, programat și utilizat. Produsul este fabricat în Statele Unite.

Număr de unități: 1,0. Îndeplinește sau depășește standardele de calitate și procedurile de control al calității sunt conforme cu cerințele stricte ale standardului. Instrumente de calitate profesională. Nume de marcă în care poți avea încredere.
Brand Pro'sKit
Color Multi
Country of Origin Canada
Grip Type Ergonomic
Item model number 300-173
Item Weight 0.05 Pounds
Manufacturer Pro'sKit
Package Dimensions 12.99 x 5.12 x 1.18 inches; 0.8 Ounces

3.2

8 Review
5 Star
76
4 Star
0
3 Star
0
2 Star
9
1 Star
15

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Reviewer
Perfect
Identical in function to the LMR400 series crimper that I've used from RF Industries at a significant cost savings. Make sure you adjust the crimpers to obtain a proper crimp, the initial setting is a little bit loose in my experience. Made quick work of around 20 UHF connectors on Shireen RFC-400 cable for amateur radio usage. Would definitely purchase again if these got lost or somehow broken (These are well made and I don't expect them to break any time soon, particularly with my frequency of use, but anything is possible).
Scritto da: scottt
Hex crimp interchangeable jaws handy, but jam.
For occasional use - okay. For professional use - Not . The interchangeable jaws for different fitting crimp type is handy design, but they jam when held upside down(lefthanded). The design requires you to leave the interchangeable jaws somewhat loose , creating a mismatch alignment on the hex crimp when you insert the connector . I found this really frustrating when attempting Andrews N type conns. / center conductor pin crimps and trying to maintain precision install. The Spec. are good and performs tight hex crimps .
Scritto da: Amazon Customer
Works good for me.
Works great for my amatuer application. Easy to use. Can work on the shield, but there is a crimp for the pin as well. Be careful, the center pin crimp will crimp it only in one place, so if you do it wrong, it won't fit into the mating connector.
Scritto da: Randall Krippner
Great tool for crimping connectors on coax
It's a bit pricey, but it's worth it. It's extremely well made, very sturdy. It's very well manufactured with close tolerances. It's a pleasure to use a really well designed tool, and that's exactly what CrimPro is.
Scritto da: jameschicago
Ok
Ok
Scritto da: adam
Poor quality
Broke after a day of work, like four crimps.
Scritto da: Goggles Pizzano
Works good, but make sure you adjust setting right out of the box
The crimper works good, but make sure you check crimp tightness, its the small gear with the screw holding it in place, usually the crimper comes at the lowest setting right out of the box, I set it for the middle and worked from there, but don't over crimp, you will be in for a world of hurt. The crimper was also sent with the wrong die, Amazon took care of that fast and promptly by sending replacement crimper with proper die for .429 for LMR400 and RG213 coax.
Scritto da: Steve
Poor quality.
Thumb screw securing the die snapped off on my first crimp.

Produse asemanatoare

hot
206-1216
4.1/5

L 2802.82

206-1216
4.1/5

L 2802.82

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array