Clemă de masă BESSEY TK-6 pentru utilizare cu masa de masă REVO, WS-3+2K, S-10

Name: Clemă de masă BESSEY TK-6 pentru utilizare cu masa de masă REVO, WS-3+2K, S-10
Brand: Bessey
SKU: 0091162055021
Price: 142.61 RON
Availability: InStock

Brand:Bessey

3.7/5

L
142.61

DESCRIEREA PRODUSULUI BESSEY TK-6 este proiectat pentru a ține o varietate de unelte în siguranță pe suprafața dumneavoastră de lucru. Clema TK-6 poate fi utilizată pentru a fixa o mini menghină portabilă S-10 pe blatul mesei. De asemenea, funcționează cu clemele WS-3 și WS-3+2K cu unghi de 90°. De la introducerea lui REVO, TK-6 poate fi folosit și pentru a monta clemele K BODY pe o suprafață de lucru. Acestea sunt vândute în perechi și pot fi găsite împreună cu WS-3+2K și S-10. BESSEY. Pur și simplu mai bine. DE LA PRODUCĂTOR Clema de masă TK-6 se atașează cu ușurință la clema unghiulară din seria WS de la Bessey, ținând-o solid pe o masă de lucru pentru a ține, fixa și alinia materialul la 90 de grade pentru aplicații de încadrare, asamblare de mobilier, dulapuri și multe altele. Un ax galvanizat înseamnă o prindere pozitivă și o durată de viață mai lungă a sculei. Bessey continuă să fie lider mondial în calitate și inovație în tehnologia de prindere manuală. Numele Bessey a câștigat statutul de clemă preferată printre lucrătorii în lemn neprofesioniști și profesioniști. Clemele Bessey pentru prelucrarea lemnului, oțel și sudură sunt proiectate și proiectate de la zero de oameni a căror unică focalizare este clemele. Bessey folosește propriile fabrici de oțel pentru a prelucra oțel de cea mai înaltă calitate disponibilă, garantând că fiecare clemă este demnă de numele Bessey. CARACTERISTICI * Se atașează cu ușurință la clema unghiulară din seria WS de la Bessey ținând acea clemă solidă pe o masă de lucru * Pentru aplicații de încadrare, asamblare de mobilier, dulapuri și multe altele * Axul galvanizat înseamnă prindere pozitivă și durată de viață mai lungă a sculei SPECIFICAȚII * Accesoriu pentru clemă unghiulară Bessey WS

Cantitate

Adaugă in coş Cumpără acum

EAN: 0091162055021

Categorii Uneli și îmbunătățiri pentru casă,

Falca fixa cu diametrul de 8 mm. Poate fi folosit și pentru a monta în siguranță noile cleme K BODY REVO pe masa de lucru. Ține clema de menghină S-10 pentru utilizare ușoară pe suprafața de lucru plană. Ține clemele BESSEY WS-3 și WS-6 cu unghi de 90° pe suprafața de lucru.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Bessey
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 1,310 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Unit^Instruction Guide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎Yes
Item Dimensions LxWxH	6.5 x 5.13 x 1 inches
Item model number	‎TK-6
Item Package Quantity	‎1
Item Weight	0.4 Pounds
Item Weight	‎6.4 ounces
Manufacturer	‎Bessey
Material	Alloy Steel
Material	‎Alloy Steel
Part Number	‎TK-6
Power Source	‎Hand Powered
Product Dimensions	‎6.5 x 5.13 x 1 inches
Size	‎Table
Style	Table
Style	‎Table

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: V. Bandeira de Mello

Bessey customer service is not customer oriented

My KRE3512 arrived with a missing jaw pad. Instead of returning the order to Amazon, I decided to contact Bessey Tools to check if they could send me a jaw pad and avoid the return. I called them and was told the would gladly mail one to my address. I confirmed the information via email on March 10 and got a reply on March 13 stating the part would take 2 to 3 weeks to be delivered. After 3 weeks and no part, I started sending emails and finally called them again since I had not received the part. Finally, on April 21, I received the a set of jaw pads, but unfortunately, not those that would fit the KRE3512. Emails sent again without any acknowledgements. I gave up and ordered the replacement pad from Amazon. In summary, don't count on Bessey Tools Customer Service to be of service.

Scritto da: Alex M

Used for custom "fences"

Made curbs for wife's sewing machine table. Non-marring tightening end is vinyl padded.

Scritto da: M. Karst

Great product and customer service!

Product is listed as a two pack but you will only receive a one pack. However, Amazon assured me that that issue will be resolved. I received a refund from Amazon customer service. FYI This product will work on the original K-body clamps that have a hole on the end.

Scritto da: Awol

When you need the best

It would be very difficult to find a better clamp than Bessey, period. Not even Woodpecker and their famous build quality can hold a candle to these clamps in terms of performance and value. Try to find these on a sale to ease the pain, and if you don't really need the best, the Bauer brand at Harbor Freight is actually very good.

Scritto da: FormosaSavage

Solid clamp

Exactly what I was looking. Solid, super strong component not made im China.

Scritto da: pdwilkersn

Keeps longer bars from tipping in KP blocks with smaller pieces.

I can only see a couple uses for this. When using long clamps the KP blocks on small pieces, you can slide this and the other jaw towards the center to balance the clamp so it doesn’t tip out of the KP blocks. The other is if you lose the plastic end support it, you could balance the weight the same way.

Scritto da: THT

Exellent set KREK2440, bad manufacturing

USA-made 40 inch clamps are of good quality, however made in China 24-inch clamps are not good. In spite of shorter length their metal bars are bent and slightly twisted. They are not parallel as well, even under high pressure. Amazon promptly mailed replacement, again 40 inch clamps are good, but both 24 inch clamps have the same problems.

Scritto da: Stephanie K.

Jaws parallel and product arrived undamaged

These clamps are not cheap so I did my homework. Folks has issues with the clamps getting damaged during shipping due to inadequate packaging, and they had issues with the jaws not being parallel when tightened down. I had neither of these issues so wanted to provide this review in case others are on the fence over these same potential problems. First the packaging. I purposely got these clamps shipped from and sold by Amazon because I knew they would help me if the products arrived damaged. Packaging is 100% from Bessey, Amazon is not adding any of their boxes. This kit is heavy, just under 40 lbs (I weighed it) so the potential to get damaged in shipping is there. The box arrived a bit banged up so I was worried I would have to deal with the hassle of exchanging, but everything was fine. There are three individual packages within the main box, and once I got past the initial banged up outer box, everything was in good shape. You get 1) the two 24" clamps packaged together in a box, 2) the two 50" clamps packaged together in a second box, and 3) the extenders packaged together in a third box. The extenders are loose in their smaller box but they are beefy and each comes in that super-strong-cut-your-hand-open-rigid plastic. The clamps come with a cardboard protector on the rails and the ends are snuggled in high density plastic foam. No damage. I think the fact that this is a kit helps with shipping, because there are multiple items, and therefore everything fits together like a puzzle and helps with overall resistance to shipping damage. As for my second concern, the jaws are indeed parallel. There is a slight angle to the jaws when not tightened down, but this corrects to parallel under tension. Time will tell how these really perform, but first impression = impressed. Happy I made the purchase.

Scritto da: Ron B.

Perfect for the sacrificial fence on my table saw.

I have an older Craftsman table saw and these work great for mounting a sacrificial fence.

Scritto da: David MacDonald

Excellent clamps

Arrived before date promised. Excellent niche clamps to secure a sacrificial fence to your table saw or chop saw

Scritto da: Claudine T.

Utile...

Très utile! Livraison rapide.

Scritto da: Adam Howse

Very useful little clamp

This was a smaller clamp than I thought it would be though it's still just as good for what I need it for. Other clamps won't do, this is specialist equipment imo hehe.

Scritto da: consumer 101

bought to use on my table saw

haven't attached yet as it was not needed at the time