Blat de masă pliabil BORA Centipede pentru cai de fierăstrău Bora Centipede - 24 inch x 48 inch - Include blat din lemn + 6 încuietori Quick-Twist pentru o masă sau banc de lucru portabil, cu instalare rapidă, CT22N maro

Name: Blat de masă pliabil BORA Centipede pentru cai de fierăstrău Bora Centipede - 24 inch x 48 inch - Include blat din lemn + 6 încuietori Quick-Twist pentru o masă sau banc de lucru portabil, cu instalare rapidă, CT22N maro
Brand: Bora
SKU: 0878258007894
Price: 1103.84 RON
Availability: InStock

Brand:Bora

3.5/5

L
1103.84

Profitați la maximum de standul dvs. de lucru Centipede® cu CT22N Centipede Solid Tabletop – conceput pentru a vă transforma Centipede® în stația de lucru ideală cu mai multe utilizări. Stabil și robust, acest blat rezistent se fixează în siguranță pe blaturile dvs. Centipede® P cu șase mânere de blocare prin răsucire ușor de utilizat, astfel încât să nu vă faceți griji că suprafața de lucru va aluneca de sub proiectul dvs. Ușor de transportat și configurat, CT22N vă ajută să ajungeți la lucru oriunde v-ați afla.

Nu există unități disponibile

EAN: 0878258007894

Categorii Uneli și îmbunătățiri pentru casă, Furnituri pentru construcții, Manipulare materiale, Mese de lucru,

Poate avea nevoie de mai multe blaturi: În funcție de dimensiunea suportului de lucru Centipede, este posibil să aveți nevoie de mai multe blaturi pentru o acoperire completă. Modelul CK6S are nevoie de 1, CK9S are nevoie de 2, CK12S are nevoie de 3, iar CK15S are nevoie de 4 blaturi. Conținutul pachetului: Pachetul include 1 blat de masă Centipede plus 6 încuietori cu răsucire rapidă pentru a fixa partea superioară pe suportul dvs. de lucru Centipede. Instrucțiunile de configurare sunt imprimate clar pe cutie, împreună cu imagini. Transport ușor: Blatul mesei este articulat în centru pentru transport și depozitare ușoare și are o fantă de transport, astfel încât să o puteți ține într-o mână, păstrând cealaltă mână liberă. Accesoriu opțional pentru geantă de transport disponibil pentru achiziționare pentru o soluție ușoară de depozitare și transport. Suprafață de lucru solidă: Blatul de masă Centipede are o grosime de 18 mm și are o suprafață solidă netedă, creând masa de lucru perfectă pentru orice lucrare sau proiect! Top It Off: CT22N Centipede Tabletop funcționează cu toate suporturile Centipede. Dimensiunile complete sunt 24 x 48 (610 mm x 1200 mm) și poate suporta până la 2000 lbs (907 kg). Creați cea mai bună stație de lucru: fie că vă mutați de la un loc de muncă la altul, fie că faceți un proiect de bricolaj în garaj sau în jurul casei, acest blat portabil și pliabil Centipede simplifică configurarea și demolarea spațiului de lucru.

Assembly Required	‎Yes
Base Type	‎Casters
Batteries Required?	‎No
Brand	Bora
Brand	‎Bora
Color	Brown
Color	‎Brown
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 112 ratings 4.4 out of 5 stars
Finish	‎Wood
Finish Type	Wood
Finish Type	‎Wood
Included Components	‎Table Top and 6x Quick Twists
Item model number	‎CT22N
Item Package Quantity	‎1
Item Weight	27.5 Pounds
Item Weight	‎27.5 Pounds
Load Capacity	‎2000 pound
Manufacturer	‎Affinity Tool Works
Material	Wood
Material	‎Wood
Package Dimensions	‎29 x 26 x 3 inches
Part Number	‎CT22N

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Lisa Baltierra

Good addition

This is a good addition for a little shop or DIYers. Backs up well, fits perfectly with the Bora base. The only thing is that it isn't be sealed so it can't get wet. Spilled some water on mine and it stained the top. Not enough water to damage it though. I was lucky I caught it in time.

Scritto da: Sailor

Table Top

I decided to try BORA’s folding table top and it certainly meets the design requirements. However, I’m 70 and it’s heavy to handle and you must be careful when folding it. The best way to open it is like a book, with the hinges to your left or right. This way you can control it and avoid possible damage to the hinges or fingers. It’s very sturdy and is easy to secure to the BORA legs. I was using a 4x4 piece of half inch plywood which works well too, but spent the money to buy their table top. It’s more expensive than it should be IMHO, but I like the idea of folding for portability. If I was still working in the field, I wouldn’t buy it.

Scritto da: Bob T, GA

Very heavy- not very portable

I purchased this top with the Bora Centipede Support 6S. The top is made of a high density fiber board and is very heavy and difficult to handle. It is 2’ x 4’ and hinged in the middle. It is definitely not very portable which makes it not well suited as a top for the 6S leg set. Also, be careful when folding the top, it is easy to get a finger caught between the two hinged panels. I am disappointed that Bora couldn’t design a much lighter more portable top.

Scritto da: Les Ehnes

Heavy

The Bora centipede system is a great concept however, in order to get the right size to fit your table you may have to buy multiple of these folding table tops, the unfortunate part is that you cannot connect all sides to your centipede stand because there is not enough mounting points, thus not allowing additional tops to be completely fastened down. It makes high/Lows at every joint where each additional table top meet and does not provide a nice flat surface. Its a good start but needs refinement.

Scritto da: Linda Kelly

Love this product

Very much liked this addition to the Bora Centipede framework. Tried this first side to be sure it was sturdy, will be ordering another for the second half of my framework.

Scritto da: AJ Bull

Depends on centipede model.

If you bought anything more than the 2x4 centipede a half sheet of ply works just fine. Notes: - I bought the 4x6 centipede with one of these tops to see if shelling out another $150 was worth it - Assembly/Disassembly takes about five minutes - if you’re tight on space it’s worth it but if you can keep a half sheet of ply somewhere it does the same trick - carrying handle and a space saving hinge are the only things that make it worth it. -bought an 18mm ply sheet and ripped it down (on the centipede) to supplement the 2x4 section and I’m a happy camper

Scritto da: Francis Simmons

Good idea but not worth it

Cool concept but not worth it. A set of horses and piece of plywood does the trick. The wood table seems like it would fall apart if it ever got wet.

Scritto da: Amazon Customer

Poorly designed tabletops

Bought these for the centipede table that I gave as a Christmas gift but ordered the tabletops for a birthday gift. By the time they were opened as the birthday gift it was past the return window time. They did not fit properly on the centipede table. Now we have two tabletops and two storage bags that can’t be returned. The centipede table works fine. The tabletops are poorly designed.

Scritto da: DavidW

Attachment handles are challenging

Like it overall. I find attaching the top to the base a bit tricky as it’s hard to get my hands in to turn the handles.

Scritto da: Douglas W.

Emits a strong VOC smell

Returned this product because it emits a very large amount of VOC off-gassing. This is likely formaldehyde being released from the low quality MDF used for the panels. Even after a week out of the box, it was still strong enough to make it difficult to be in the same room with it. The product is probably fine for use outdoors, but would not recommend it if you plan to use it indoors. In addition, although the product is very sturdy, it's quite awkward to setup due to its heavy 27.5 lb weight.