BLACK+DECKER 7,0 Amp 1/2 in. Kit mașină de găurit/Driver electric (DR560) Doar mașină de găurit/Driver

Name: BLACK+DECKER 7,0 Amp 1/2 in. Kit mașină de găurit/Driver electric (DR560) Doar mașină de găurit/Driver
Brand: BLACK+DECKER
SKU: 0012301047028
Price: 585.48 RON
Availability: InStock

Brand:BLACK+DECKER

3.6/5

L
585.48

Când munca este grea și solicitantă, nu vă mulțumiți cu nimic altceva decât cu mașina de găurit electrică BLACK+DECKER 7 Amp 1/2 in. Această mașină de găurit/șurubel puternică, cu cablu, este ideală pentru găuri și pentru a introduce elemente de fixare mari printr-o varietate de materiale, inclusiv lemn, metal și plastic. În plus, este suficient de compact pentru a manevra în spații înghesuite și pe scări. Mecanismul cu viteză variabilă este într-adevăr util atunci când trebuie să personalizați puterea de ieșire. Acest mașină de găurit/ șofer electric se descurcă cu ușurință celor mai dificile aplicații. Are o mandrina cu cheie din metal pentru durabilitate si o retinere mai buna a bitilor, precum si un maner de prindere confortabil si un maner lateral la 360 de grade pentru un control suplimentar in timpul gauririi. În plus, un sistem de perie pentru marșarier oferă putere maximă în înainte și înapoi.

Cantitate

Adaugă in coş Cumpără acum

EAN: 0012301047028

Categorii Uneli și îmbunătățiri pentru casă, Unelte electrice și de mână, Unelte electrice, Burghie, Burghie de găurit,

INCLUDE – Dr560 1/2 in. mașină de găurit/ șofer, (1) cheie pentru mandrina + suport, (1) mâner lateral. CORDAT – Burghiul cu cablu oferă timp de funcționare nelimitat chiar și pentru cele mai mari lucrări. MÂNERUL COMFORT-GRIP – Pentru un confort sporit, chiar și în timpul utilizării prelungite. MÂNER LATERAL DE 360 DE GRADE - Oferă control suplimentar și stabilitate în timpul găuririi. SISTEM DE PERIE DE MARCHĂRAR – Pentru putere maximă atât înainte, cât și înapoi. MANDRINĂ CU CHEIE – Mandrina integral metalică oferă durabilitate sporită și reținere a bitului. VITEZĂ VARIABILĂ - Personalizați puterea de ieșire de până la 900 rpm (rotații pe minut) pentru un control îmbunătățit al fiecărei sarcini de foraj și de conducere. MOTOR PUTERN - Motorul de 7 amperi oferă puterea de care aveți nevoie pentru a face treaba. COMPACT – Designul raționalizat vă permite să manevrezi în spații înghesuite și zone incomode. UTILIZARE VERSATILĂ - Faceți găuri și introduceți elemente de fixare mari prin lemn, metal și plastic. Capacitate: 1/2 inch (oțel); 1-1/2 inch (lemn).

Amperage	7 Amps
Amperage	‎7 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	BLACK+DECKER
Brand	‎BLACK+DECKER
Certification	‎certified frustration-free
Color	‎Orange
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 624 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎bare-tool
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎DR560
Item Package Quantity	‎1
Item Weight	‎3 Pounds
Manufacturer	‎Black & Decker
Maximum Power	‎1800 Watts
Maximum Rotational Speed	900 RPM
Maximum Rotational Speed	‎900 RPM
Part Number	‎DR560
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎12 x 3.5 x 10.38 inches
Product Dimensions	‎12"L x 3.5"W x 10.38"H
Size	‎1/2"
Special Feature	‎compact
Special Features	‎compact
Speed	‎900 RPM
Style	‎Drill/Driver Only
Voltage	120 Volts
Voltage	‎120 Volts
Warranty Description	‎2 Year Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Ronnie P.

Works good

Did what I needed to

Scritto da: James May

Excellent tool, best buy for the money

This is the best drill you can buy for the money. My last Black & Decker drill just now broke after 15 years. The switch broke, but the motor was just as strong as ever. To put it in perspective, I have 6 drills (counting 4 cordless), 2 of which are 1/2 inch capacity Black & Decker units purchased 15 years ago in Walmart. The other one is still working and that must be some kind of record. This newer drill does not have a hammer switch on top, but the only place I ever used that was to drill holes in concrete with masonry bits. If you do a lot of that, it probably is not the best choice. This drill is very strong and delivers a lot of torque so it isn't what you need for light duty jobs. You need a strong arm and good grip as you would for any drill built to deliver maximum power (no adjustable slip clutch) and it can twist your arm if you don't time the release or reduction in power to coincide with the end of the drive/drill cycle. I drive a lot of torx (star) head T-20 and T-25 deck screws using a magnetic bit holder and drill holes with bits up to a foot long and use a lot of spade bits for holes up to 1-1/2 inches. If you don't back off in a timely manner, the screws will sink too deep. I don't pamper my tools and I much prefer a keyed chuck like this drill has for better holding power and durability. If you can't afford more than 1 drill you will spend extra time working the chuck key while swapping bits out. It is a little noisier than some drills because of the straight cut gear reduction, but this also reduces amperage flow at low speeds and increases motor life. The redesigned gear reduction system is probably the main difference in this drill and my 2 older ones. Hopefully it will last as long as the one it replaced. The cord insulation is softer and more pliable than the old units which makes it a little easier to manipulate in tight places in cold weather. This is an excellent choice for workloads which drain batteries on a cordless drill. Even my best cordless drills will drain 2 batteries on a hard day. This drill will do the same amount of work as my best cordless drills but you have to drag an extension cord around which is physically a little harder than lifting the extra weight of the battery on a cordless. That's the trade off. I don't know of any line of tools that delivers as much bang for the buck as Black & Decker. Recommended.

Scritto da: Robert Michaelson

Very powerful and light

I have used a similar sized battery powered drill. It takes a large heavy battery. As long as you can plug it in, this drill solves all the problems with battery powered drills.

Scritto da: Blue-Collar

Different but same

This drill has incredible torque under slow RPM's. I had an old black and decker 1/2" drill made from metal that was forged in the fires of a great mountain. Over the years, it took a beating. Unfortunately, I was drilling a hole in a hard to get to piece of steel and allowed the drill to drift sideways...snapping the main shaft right in half. Apparently, the scroll that came with the drill was not prophesying when it said, "No matter what, thy RPM will be 450." I ordered this as its replacement. Yeah, well, it is not the drill of yore but it has done every job I have set for it. I do not like the variable speed trigger. Sometimes, when I am on top of the drill trying to move my large metal drill bit very slowly, I apply a bit to much pressure and speed the drill past what I intend. I have drilled lots of steel, soft wood, hard wood, aromatic wood and plastic and it did a wonderful job. The adjustable handle is a joke and feels like it is going to break off. It has slipped off several times when using the drill. I think a stud that allows you to screw a handle in on top and sides would be superior. That was what the older drill had and it spoiled me. It did take a few seconds to set up before each use but it was solid.

Scritto da: Diggy

I love this drill

I had a 7 Amp Black & Decker drill for at least a decade, abusing it, and finally burnt it up by drilling holes through railroad ties. I bought a Dewalt 8.4 amp drill to replace it, thinking it would be stronger. It wasn’t even close. Even being halfway burnt up, my old drill still was able to power through when the Dewalt locked up and started smoking. So I went ahead and ordered this one, which was very like my old one. I started drilling and the new Dewalt locked up. I switched drills with the bit still stuck in the railroad tie and this drill took off and easily finished the job. Obviously, I am returning the Dewalt. In fact, I’m going to order another one of these just in case they stop making them.

Scritto da: Froggyv

The right tool for the task at hand.

This is an excellent drill. But you need to pay attention to what you are drilling, it is not recommended for steel or concrete. I was drilling wood with an auger bit, my 1/4 inch drill motor did not have enough torque, it would bind. It was a new bit so I was sure that was not the problem. This drill drilled over 100 holes with the same bit in less than two hours. I spent more time putting wood into my work table clamp than I did drilling. The flutes on the auger could have been longer and would have made the job faster, but having the ability to reverse the direction of rotation allowed for easy chip removal and saved me from having to purchase a bit with a longer set of flutes. The price was right, it comes with a 2 year warranty and registering the warranty is fast and easy. Would I buy it again? Sure, after the warranty runs out. I have used B&D products for years, I have never had any issues with any of them.

Scritto da: Dennis Hutchinson

Appears as if it may have been used

The outer box was in good condition but the actual drill box was crushed and appeared to have been taped shut like it was used or was a display model in a brick and mortar store. Additionally, the chuck was missing meaning it's basically worthless as-is.