attwood SP-15100 Swivl-Eze Placă de montare a scaunului Jon Boat din aluminiu în stil bancă, set de 2, mărime unică (SP-15200)

Brand:Swivl-Eze

3.4/5

L
368.17

Bill Lewis Rat-L-Trap Mini-capcanăMini-capcana este un favorit dovedit pentru a acoperi o mulțime de apă rapid pentru a găsi și prinde pești. Chiar și la dimensiunea sa de 2,5 și greutatea de 1/4 uncie, Mini Trap are o capacitate excelentă de turnare, deoarece este compactă și aerodinamică. Este întotdeauna sezonul potrivit pentru aruncarea mini-capcanei. Reducerea dimensionării nalucului dvs. poate fi biletul atunci când peștii urmăresc alaba sau prada mai mică. Mini-capcana Rat-L-Trap este perfectă pentru ape limpezi puțin adânci și atunci când peștii de momeală sunt puțin supărați. Ideal pentru aruncarea în școli de alaba care lucrează de-a lungul suprafeței. Excelent pentru gura mare, gura mică, basul alb și multe specii de apă sărată. Temperaturile scăzute fac, de asemenea, aceste naluci alegeri bune. Pe măsură ce metabolismul peștelui încetinește, o masă de dimensiuni mici devine mai tentantă. Aceste capcane ușoare reprezintă, de asemenea, o alegere excelentă pentru peștișor. Mulți lunker crappie au căzut victime ale acestor două capcane tenace. Invenția legendară a lui Bill Lewis, Rat-L-Trap, este recunoscută drept cea mai populară și, prin urmare, cea mai imitată nalucă din ultimii 35 de ani. Specificații:- Lungime: 2,5;- Greutate: 1/4 oz;- Stil : Se scufundă;- Cârlige din față: #4;- Cârlige din spate: #6;

Componente incluse: produs final și informații. Excelent pentru montarea scaunelor în bărci Jon și alte aplicații pe bancă. Construcție din aluminiu pentru greutate ușoară și durabilitate. Șinele sunt lungi de 30. Excelent pentru montarea scaunelor în bărci jon sau utilitare.
Brand Swivl-Eze
Brand ‎Swivl-Eze
Brand Name ‎Swivl-Eze
Color Unspecified
Color ‎Unspecified
Customer Reviews 4.4 4.4 out of 5 stars 59 ratings 4.4 out of 5 stars
Fit Type Universal Fit
Fit Type ‎Universal Fit
Included Components ‎End Product & Information
Item Dimensions LxWxH ‎33.25 x 2.5 x 2 inches
Item Package Dimensions L x W x H ‎30.5 x 3 x 2.5 inches
Item Weight ‎2.35 Pounds
Manufacturer ‎Swivl-Eze
Material other
Material ‎other
Model Name ‎Swivl-Eze Boat Seating
Number of Items ‎1
Package Weight ‎1.07 Kilograms
Part Number ‎SP-15200
Size ‎One size
Style ‎Rails Only
Suggested Users ‎unisex-adult
Vehicle Service Type Boat
Vehicle Service Type ‎Boat

3.4

9 Review
5 Star
66
4 Star
14
3 Star
12
2 Star
5
1 Star
3

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: J
J
Good product
Scritto da: Joseph
Worked great!
I installed the Swivel-Eze in our boat. It was easy to install; took about 10 minutes. It makes it possible to level the boat out so weight is distributed more evenly in the water.
Scritto da: Laura Southworth
Good Idea Poor Quality
I got these slides and I also ordered the mount plate that you have to buy separate which is ignorant because you can buy the 15 inch slides as a kit with the plate. The only instructions came with the plate and that was how to install it to an aftermarket seat. The slides did come with screws but there are only 2 holes in the rear plate which is not enough. I had to drill another in the center and come up with another screw because the slide was pulling up in the center. Installation is pretty straight forward but this thing was a piece of junk. I say was because after getting it all together it wouldn't slide and would stick to the point where it was pretty useless. You could see where the edges of the plate were cutting into the front slide and the rear plate was cutting into the original jon boat seat itself. I pulled it all back apart and ended up grinding all the edges with a sanding barrel on a dremel tool and then by hand sanding the edges and front slide with 180 grit emery cloth for an hour. In order to do the front slide I took the emery cloth and wrapped it around the hook of the plate and ran it back and forth with the plate. After doing that it slides pretty decent and I took some brake caliper grease and applied a thin bead to the jon boat seat where it was cutting as well as the edges of the plate. Over all a good idea but quality is very poor. I honestly don’t see this fix lasting but we will see. You can see a video of the installation and update on my YouTube channel just Google, Skruggboat
Scritto da: david zielinski
good product
Like the product and functionality. not sure you need to second track. maybe offer it with and without. would save customer $ and shipping cost . Hard to slide with second track anyway.
Scritto da: Joseph R Peterson
The aluminum seems heavy duty enough. The mounting screws ...
The aluminum seems heavy duty enough. The mounting screws it comes with are junk. I pre drilled holes and the heads still strip.
Scritto da: James K. Nummerdor II
Great product
I used this to mount two seats. Cut into equal lengths add a few mounting holes worked out great
Scritto da: Chad
Five Stars
Nice product
Scritto da: AJ
Three Stars
Works well enough but they do not slide as easily as one would anticipate.
Scritto da: James
Right product
They don’t work well if the seat has a rounded edge. Will require a little extra work

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array