Armacost Lighting 840600 Driver reglabil de 60 wați pentru iluminat cu LED, cu cablu AC detașabil, iluminare albă de 60 wați, 12 volți

Name: Armacost Lighting 840600 Driver reglabil de 60 wați pentru iluminat cu LED, cu cablu AC detașabil, iluminare albă de 60 wați, 12 volți
Brand: Armacost Lighting
SKU: 0850080006528
Price: 509.73 RON
Availability: InStock

Brand:Armacost Lighting

3.7/5

L
509.73

Driverul LED cu reglaj de 60 de wați pentru iluminare Armacost oferă performanțe remarcabile de reglare a luminii LED și control al luminozității de calitate arhitecturală. Deși practic toate variatoarele vor funcționa cu acest driver cu LED reglabil, Armacost Lighting recomandă variatoarele universale Lutron CFL și Leviton illumatech datorită ajustării gamei lor de grad scăzut. Oferă o diminuare lină, stabilă, fără pâlpâire, cu pornire ușoară și performanță dorită de estompare și fade-to-dark. Când un dimmer este setat la luminozitate maximă, driverul LED oferă luminozitate maximă - nu există nicio pierdere a ieșirii luminii de vârf. Sârmă directă. Șoferul are protecție completă de oprire de siguranță în caz de suprasarcină a iluminatului, circuit deschis, scurtcircuit, supratemperatura sau altă defecțiune, repornire automată după ce defecțiunea a fost corectată, aceasta este o unitate de alimentare de clasa 2 pentru siguranță și are clasa II AC intrări, carcasă complet izolată, nu este necesar niciun fir de împământare. În interior/exterior, etc. Listat pentru utilizare în locuri uscate și umede. Pentru a funcționa corect, iluminarea cu LED-uri trebuie să funcționeze la o putere de 12 volți CC și să poată fi reglată. Acest driver funcționează bine cu toate luminile cu bandă LED de 12 V dc. Pentru alte tipuri de iluminare cu LED-uri, contactați producătorul pentru a confirma că iluminarea este reglabilă și funcționează la o putere de 12 volți CC.

Cantitate

Adaugă in coş Cumpără acum

EAN: 0850080006528

Categorii Uneli și îmbunătățiri pentru casă, Iluminat și ventilatoare de tavan, Luminat Accesorii, Transformatoare de joasă tensiune,

Fără sarcină de putere minimă; reglarea luminii funcționează la fel de bine, indiferent dacă alimentați o singură lumină cu LED-uri de 3 wați sau 60 de wați de iluminare cu bandă, sau o combinație a ambelor. Sursa de alimentare clasa 2 are protecție la suprasarcină, oprire automată. Conectați până la 100% din sarcina maximă nominală de 60 de wați – nu este necesară reducerea performanței. Compatibil atât cu variatoarele de 120 volți AC și comenzile de iluminare, cât și cu variatoarele și comenzile DC de joasă tensiune. Oferă o reglare lină, fără pâlpâire, pentru iluminatul LED de 12 volți, cum ar fi benzi cu LED-uri, module, bare luminoase, disc și alte lumini cu LED-uri.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Armacost Lighting
Capacity Description	‎60 Watt
Certification	‎UL
Color	‎White
Country of Origin	‎China
Current Rating	5 Amps
Customer Reviews	4.7 4.7 out of 5 stars 787 ratings 4.7 out of 5 stars
Included Components	‎60-Watt power supply
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.06 x 2.38 x 1.38 inches
Item model number	‎840600
Item Package Quantity	‎1
Item Weight	‎8 ounces
Manufacturer	‎Armacost Lighting
Material	‎Plastic
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number Of Pieces	‎1
Part Number	‎840600
Pattern	‎Lighting
Plug Format	‎A- US style
Power Source	AC
Power Source	‎AC
Product Dimensions	‎7.06 x 2.38 x 1.38 inches
Shape	‎Rectangular
Size	‎60 Watt
Special Features	‎Detachable AC Cord
Style	‎12 Volt
Type of Bulb	‎LED
Usage	‎ETL Listed for dry and damp location use
Voltage	‎12 Volts
Warranty Description	‎Limited 3-year warranty. This product is for dry and damp locations.
Wattage	‎60 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu^*

Rating-ul tău

Scritto da: Thomas H.

Had to replace a unit in the kitchen, and this works perfectly

My under cabinet lights stopped working. Changed the dimmer switches, but it finally was the transformer. All good now.

Scritto da: PVM

Does what it's supposed to

Easy installation. I wired directly to a dimmer switch and it works perfectly.

Scritto da: S.C. Fluhr

Smooth dimming led driver

Quality made, nice and compact, works as advertised

Scritto da: paul

Electrician approved

One of the few LED drivers that can be dimmed in compliance with the NEC for electrical inspection. The cord that came with it can be unscrewed and the driver can be hardwired with 14-2 romex. The connections are circuit board terminal blocks on each end, so they required a jeweler screwdriver. Be sure to hold the blocks when tightening the screws, so the block doesn't torque off the circuit board. The unit does soft start and ramp to full in 1 sec. Other than that, there isn't a 3 sec delay to warm up like cheap switching power supplies have before they instantly pop on at full brightness. That's nice. I had no problem using a z-wave smart dimmer. I used the a Linear aka Nortek aka GoControl model WD500Z5 zwave dimmer and it successfully burned in so far for 1 day. It does get very warm, even pushing only 10 watts. Like a hot McDs coffee cup hot. Not too hot to start papers on fire, but too warm to be comfortable holding. Plan for that when mounting. Also, If you wired several LED homeruns instead of daisy chaining the runs, be sure to plan on wirenuts or a terminal block to connect to the driver- it only has internal room for 1 #12 pair of wires. You have no internal room for other connections. I powered 10 watts of LED under cabinet LED tape. The cables in the pic are 14-2 romex and 16-2 cl2 riser cable. No issues with those gauges.

Scritto da: Snap, Crackle and Pop

A high-quality dimmable, "universal" 120V to 12V DC LED driver power supply

The Armacost Lighting 840600 is a high quality, dimmable power supply for 12V LED fixtures or systems. COMPATIBILITY: This power supply should be compatible with a wide range of 120V dimmers. The installation instructions state the following: "Armacost Dimming LED Drivers are compatible with both forward phase (leading edge, triac, incandescent) and reverse phase (electronic low-voltage, ELV, and trailing edge) AC dimmers ... They are also compatible with low-voltage PWM dimmers and RGB color controllers. "Although virtually all dimmers will work with Armacost Dimmable LED Drivers, Armacost Lighting recommends dimmers that can be programmed or have an adjustment dial to set the low end dimming range." BUILT IN CONNECTORS: The built in connectors work well and quickly. They need to have some of the outer insulation to clamp onto, to keep the stress of any pull on the wire from going to the terminal connection itself. So don't strip too much of the inner or outer insulation. LOW MINIMUM POWER LOAD: The minimum power load is just 5 watts. VOLTAGE: Output is 12V DC. DIMENSIONS: It's somewhat large, at 7-1/16 inches long by 2-3/8 inches wide by 1-3/8 inches high. ENCLOSURES: If you want an enclosure, Armacost makes variations with enclosures for conduit connections. The only real negative is the cost, though of course having a high-performing, high quality power supply makes it a reasonable value. Lower-watt drivers are less expensive than this one. The manufacturer's website has lots more info, including specs and installation instruction. TWO WARNINGS: First, be sure to get a power supply rated with enough watts to cover your needs. Second, be careful to get a power supply with the right input voltage. Armacost makes a line of 12V dimmers and matching power supplies. This product is the universal power supply, to be used with a range of dimmers and 120V.

Scritto da: CAMPFIRESKY

NEW KITCHEN SINK LIGHTING

Very easy to install. I hard wired the power pack and also installed a dimmer switch. Works perfectly with no humming. Great product.

Scritto da: Kindle Customer

Everything I wanted at a reasonable price

Put in a dimmer switch and get the 120 leds per meter. You can crank it up to give all the light you will ever need and yet dim it down to simply add ambience to your kitchen. I installed them in the channel with the diffusers and absolutely love them.

Scritto da: Nick

It actually works with a dimmer!!

Wow an LED driver / power supply that actually dims the LEDs!!! I thought there was something wrong with my LEDs or dimmer as I tried two different PLUSPOE dimmers that did not actually dim anything and also buzzed. This driver actually works, and works well. I am using the 12v/24watt one to drive 8x half moon 12v LED stair lights. I am also using a Leviton 6674 dimmer in the wall. There is no switching noise from this driver, the construction is solid and the dimming is smooth without flicker. Completely worth the higher price than non certified drivers. The only thing that was odd is that it did not come with a power cord. The lack of a power cord was not a big deal as I had one laying around, but I could see it bothering other people. I have a light switch controlling half of a receptacle in low voltage box, so I did need one.