0
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister
0

Total:L 0.00

Vezi căruciorulVerifică
LoginRegister

APEC Water Systems FILTER-SET-CTOP Set de filtre de înlocuire cu capacitate dublă, fabricat în SUA, pentru sistemul de filtru de apă cu osmoză inversă de blat Ultimate Series Etapa 1-2, alb

Brand:APEC Water Systems

3.8/5

L
460.59

Setul de prefiltre de înaltă capacitate APEC este fabricat în SUA cu componente de filtrare de înaltă calitate pentru a oferi un set de filtre de durată mai lungă pentru a proteja și prelungi durata de viață a sistemului dumneavoastră de osmoză inversă. Setul de filtre de calitate premium durează 6-12 luni pentru îndepărtarea de înaltă performanță a contaminanților. Aceste filtre de dimensiune standard sunt 10 și au ¼ fitinguri cu conectare rapidă pentru schimbarea durabilă și ușoară a filtrelor. Aceste filtre sunt compatibile cu sistemul de apă potabilă cu osmoză inversă de la APEC (RO-CTOP). Toate filtrele de mare capacitate fabricate în SUA Prima etapă: filtrul de adâncime a sedimentelor din polipropilenă de mare capacitate 10 în linie va îndepărta eficient murdăria, nisipul și sedimentele din apă. Etapa a 2-a: Filtru de carbon de mare capacitate 10 în linie cu coajă de nucă de cocos pentru a elimina clorul, gusturile, mirosurile, tulbureala și culorile. Despre APEC De peste 17 ani, APEC este un producător lider în industrie, specializat în sisteme RO de înaltă performanță. În calitate de producător original, am dedicat o echipă informată și sinceră, care se angajează să ofere satisfacție clienților în speranța de a aduce mulți ani de bucurie și sănătate bună pentru tine și familia ta. APEC Water nu distribuie și nu vinde produsele noastre către niciun vânzător terță parte de pe Amazon. Vă rugăm să cumpărați produse APEC Water originale de la Amazon sau APEC Water direct pentru autenticitate.

Cantitate
Adaugă in coşCumpără acum

EAN: 0854961005228

Categorii Uneli și îmbunătățiri pentru casă, Amenajări pentru bucătărie și baie, Filtrare și dedurizare a apei, Filtre de apă de schimb, Filtre de apă de schimb pentru blat,

Filtrele de schimb de înaltă performanță sunt compatibile cu toate sistemele RO standard de blat. Filtru de carbon din coajă de nucă de cocos a doua etapă pentru a elimina clorul, gustul, mirosurile, tulbureala și culorile. Filtru de sedimente din prima etapă pentru a îndepărta praful, particulele și rugina. Include filtru de carbon pentru sedimente și coajă de nucă de cocos pentru a proteja și prelungi durata de viață a RO. APEC Water ULTIMATE Series FILTER-SET-CTOP este pentru RO-CTOP și RO-CTOP-PH.
Batteries Included? ‎No
Batteries Required? ‎No
Brand APEC Water Systems
Certification ‎certified frustration-free
Color ‎White
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 95 ratings 4.7 out of 5 stars
Duration 12
Included Components ‎FILTER-SET-CTOP
Is Discontinued By Manufacturer ‎No
Item model number ‎FILTER-SET-CTOP
Item Package Quantity ‎1
Item Weight 1.5 Pounds
Item Weight ‎1.5 pounds
Manufacturer ‎APEC Water Systems
Material carbon
Material ‎carbon
Number Of Pieces ‎2
Part Number ‎FILTER-SET-CTOP
Product Benefits Reduces Chlorine
Product Dimensions ‎10 x 5 x 2.5 inches
Size ‎2 Count

3.8

8 Review
5 Star
84
4 Star
11
3 Star
2
2 Star
0
1 Star
3

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: Kumari
You should really look into a home water system
Back when I owned a house I got water from a shared well and the owner of the well didn't ever run tests on the water quality so I got a reverse osmosis installed in the kitchen for drinking/cooking water. When I moved I bought a version of that system what can be attached to any sink. With everything in the news about water systems I think anyone who can afford it should look into getting this kind of system. The water tastes much better than the filtering that water pitchers do. It's pretty easy to install these filters and they only need to be replaced every 6 or 9 months depending on how many gallons you go through in a month
Scritto da: Amazon Customer
Valuable installation tip
I have owned two APEC countertop systems replacing the filters on several occasions. The quality of the water is very good and changing the filters is pretty simple (instructions included). A few previous buyers wrote reviews recommending running water thru the #1 & #2 (carbon) filters before hooking them up to the final filters, #3 & #4. I tried this today with the replacement filters I just received and believe this is a great idea that probably will increase the efficiency and longevity of the system. It took a few minutes and flushed out a surprising amount of black sediment. After it ran clear I hooked it up and was good to go. Our household water is potable but when it comes to water for drinking, coffee, and ice this system provides a crystal clear product. We fill two 1 gallon containers as needed. It takes about 20 minutes to make a gallon.
Scritto da: AL
I notice my RO system no longer produce waste water and the filtered water drip very slowly
Update 2/22/2018 After several messages back and forth, the company decided to send me a membrane filter to replace my existing one ruin by the carbon from Stage 2 filter. I think this deserve upgrade from 2 stars to 4 stars because they are taking care of customer's problem caused by the new filters installed. I didn't give 5 star because they should have put warning label on the stage 2 filter. It seems that new filter will always eject some carbon initially. So before connecting stage 2 carbon filter to stage 3 membrane filter, water need to turn on to eject out free flowing carbon until water turn clear. Once water is clear, it is safe to connect stage 2 filter to stage 3 filter. If I was warn about it, I would not have the problem. Original review 2/21/2018 I purchase this set of filters to replace the stage 1 & 2 on my RO system. My system is currently about 2 year old and function perfectly. Prior to the filter change, I test it with TDS tester and the filtered water show 14ppm with the tap water showing 285ppm. Based on the test result, I don't really need to change the filter. However, I figure change stage 1 & 2 filter may help stage 3 &4 last longer. so I went ahead with the stage 1 & 2 filter change. After replace stage 1 & 2 filter, I notice my RO system no longer produce waste water and the filtered water drip very slowly. When I tested the filtered water, it show quality of 80-140 ppm. Prior to the filter change was only 14ppm. this mean my water is 5 to 10 time worse than before the filter change. I message the Apec about the situation and I was asked to test the water flow on filter stage 1 & 2. I pull the tube connect stage 2 to stage 3 and turn on the water to see if water pressure is good and it show strong flow. I also notice that water came out of stage 2 was gray for about 2 seconds then it turn clear. I got curious and decide to open up stage 3 housing to see why it is not producing clean water. The moment I open up the housing, I notice the interior surface was complete cover in a layer of carbon throughout. The stage 3 membrane was basically clog with carbon from stage 2. That explains why it no longer produce waste water and product clean water at such slow and dirty matter. Based on the condition, I believer I received a defective stage 2 and it ruin my stage 3 membrane filter. I message APEC about the situation and I was told my system is old and need filter change. If I didn't test the water quality before I replace the stage 1 and 2, I might actually think that is the case. But number doesn't lie and seeing it with my own eye, I don't believe that is the case and they should own up to it. Defect happen from time to time, but how you handle it with customer when it happen is more important. The way then handle it leave me to say -----Buy at your own risk
Scritto da: Alex
Super Easy to install
Before I purchase these replacement filters. My waste water drain is not a flow smoothly anymore, and the filtered water flows slower that when I first purchased it. The installation process is super easy, I was able to complete it within 10 min, then you need to let it run for 15 mins. Afterward, the improvement is very noticeable, the waste water now flow very smoothly, and the filtered water come out much faster. You definitely need to replace your filter every 6 month. Go my fellow hydrohomies!
Scritto da: YV
Perfect replacement for the countertop versions
Maybe the price is a bit higher. Overall good.
Scritto da: Frank
Great filters, but terrible instructions
What you are not told is how to make sure you rinse the new filters before installing. If you do not, you will push all the charcoal dust into the system, making the filter less efficient, and greatly slowing the flow of water through the system. When you get the new charcoal filter, disconnect the line in from the first line of defense, the sediment filter. Look at the new filter, and find the arrow that shows direction of water. Connect the line in from the faucet to the inlet side of the new charcoal filter. Point the outlet for that filter into the sink, and run the water for at least one minute. You will see why as soon as you turn on the water, as what comes out will be black. Run until the water is clear, probably at least one gallon. Then connect everything and you are ready to go.
Scritto da: W. Patch
Carbon Dust
As noted by other buyers, the initial carbon block filter (CT-24CAB) used to reduce the chlorine in the incoming wash to the membrane does have some loose carbon dust/fines, same as the output filter and contrary to what the installation instructions state. Once installed, the dust can be easily flushed out by detaching the block filter output line from the input fastener on the membrane sump/cylinder and running water through the first two filters until the rinse is clear. Although there is not much dust present, I believe flushing the block filter prolongs the life of the membrane. Mine has been installed for two years and still yields a reading of 10 ppm versus 440 ppm from the tap - certainly a quality result.
Scritto da: BoatguySWCC
Easy installation
This product easily installs. Instructions are easy to follow and all parts provided to include the clean water hose.

Produse asemanatoare

hot
Filtru de apă Whirlpool WHA2FF5, negru
3.7/5

L 207.92

Filtru de apă Whirlpool WHA2FF5, negru
3.7/5

L 207.92

hot
EcoPure EPW4P Filtru de apă de schimb plisat pentru întreaga casă-universal se potrivește cu majoritatea sistemelor de mărci majore, 1 număr (pachet de 1), alb/albastru
3.7/5

L 217.11

EcoPure EPW4P Filtru de apă de schimb plisat pentru întreaga casă-universal se potrivește cu majoritatea sistemelor de mărci majore, 1 număr (pachet de 1), alb/albastru
3.7/5

L 217.11

hot
Kit de înlocuire a filtrului răcitorului de apă Brio în 4 etape RO - pentru modelul CLPOURO420SCV2
3.2/5

L 1140.45

Kit de înlocuire a filtrului răcitorului de apă Brio în 4 etape RO - pentru modelul CLPOURO420SCV2
3.2/5

L 1140.45

hot
iSpring FC15 5 Microni 10 Cartuș de filtru de apă CTO de înlocuire cu bloc de carbon pentru sistemul de filtrare RO cu osmoză inversă sub chiuvetă, 10 x 2-1/2, Cartuș de filtru de carbon CTO alb
3.6/5

L 238.22

iSpring FC15 5 Microni 10 Cartuș de filtru de apă CTO de înlocuire cu bloc de carbon pentru sistemul de filtrare RO cu osmoză inversă sub chiuvetă, 10 x 2-1/2, Cartuș de filtru de carbon CTO alb
3.6/5

L 238.22

hot
Filtru de apă de schimb pentru cap de duș T3 Source
3.7/5

L 283.91

Filtru de apă de schimb pentru cap de duș T3 Source
3.7/5

L 283.91

hot
Naples Naturals - SPR505BXF4 RO58 Sistem de filtru de apă cu osmoză inversă (5 trepte) cu filtre de schimb suplimentare, alb
2.4/5

L 1577.52

Naples Naturals - SPR505BXF4 RO58 Sistem de filtru de apă cu osmoză inversă (5 trepte) cu filtre de schimb suplimentare, alb
2.4/5

L 1577.52

hot
Cuno 55603-21 3M Cfsfsr-10 19 1/2 Retrofit Reducere nămol fin în cartuş, 10 microni absoluti, 6 Gpm
0.1/5

L 553.26

Cuno 55603-21 3M Cfsfsr-10 19 1/2 Retrofit Reducere nămol fin în cartuş, 10 microni absoluti, 6 Gpm
0.1/5

L 553.26

hot
APEC Water Systems FI-PB1 CT-1000 Filtru de schimb pentru sistemul de apă potabilă de blat, alb
3.6/5

L 271.74

APEC Water Systems FI-PB1 CT-1000 Filtru de schimb pentru sistemul de apă potabilă de blat, alb
3.6/5

L 271.74

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array

Total:L 0.00

Vezi căruciorulVerifică

Categorii

Toate categoriile
Meniul Categorii Aproape Cart

Menu