Adaptor MNPT SharkBite de 1/2 inch, fiting din alamă pentru instalații sanitare, țeavă PEX, cupru, CPVC, PE-RT, HDPE, U120LFA 1/2 in.

Brand:SharkBite

3.7/5

L
139.96

DESCRIEREA PRODUSULUI Simplificați-vă nevoile de instalații sanitare cu adaptorul tată MNPT Push to Connect SharkBite. Compus din alamă durabilă fără plumb și având un design cu flux complet pentru un flux maxim de apă, fitingurile SharkBite pot fi utilizate cu orice combinație de țevi din cupru, PEX, CPVC sau PE-RT și au un design ușor de conectare pentru a permite instalare rapida. Nu sunt necesare sertizare, lipici, lipire sau unelte, pur și simplu introduceți țeava și dinții din oțel inoxidabil mușcă și strâng bine, în timp ce un inel O special formulat se comprimă pentru a crea o etanșare perfectă. Adaptorul MNPT poate fi dezasamblat cu ușurință folosind o unealtă de deconectare, astfel încât fitingurile și supapele să poată fi schimbate și reutilizate cu ușurință (instrumentul de deconectare nu este inclus). Fitingul MNPT poate fi rotit chiar și după asamblare pentru a permite o instalare mai ușoară în spații înguste. Acest fiting pentru instalații sanitare MNPT este un rost fabricat certificat care poate fi instalat în linii umede și pentru aplicații atât subterane, cât și în spatele peretelui. Adaptorul push to connect MNPT este evaluat pentru 200 psi și 200 grade F și vine cu o garanție de 25 de ani. DE LA PRODUCĂTOR SharkBite este sistemul de conexiune prin împingere care se instalează cu adevărat. Este cel mai simplu mod de a îmbina țevi de cupru, CPVC sau PEX în orice combinație - fără lipire, cleme, îmbinări sau lipici. Doar introduceți țeava și dinții din oțel inoxidabil mușcă și strâng bine, în timp ce un inel O special formulat se comprimă pentru a crea o etanșare perfectă. Dezasamblarea este la fel de rapidă folosind instrumentul simplu de deconectare. Astfel, fitingurile și supapele pot fi ușor schimbate și reutilizate. Pot fi rotite chiar și după asamblare pentru o instalare mai ușoară în spații înguste. Obțineți SharkBite și înțelegeți următorul proiect de instalații sanitare. Aceste fitinguri nu sunt plumb și îndeplinesc toate cerințele pentru instalațiile sanitare din California și Vermont.

CERTIFICAT: fitingul MNPT este certificat ca îmbinare fabricată și poate fi utilizat pentru aplicații subterane și în spatele peretelui fără panouri de acces; Evaluat pentru 200 psi și 200 de grade F. DURABILĂ: Fitingul nu are plumb și este rezistent la coroziune pentru durabilitate și fiabilitate de lungă durată. COMPATIBIL CU SPAȚII ÎNCHIS: Fitingul din alamă poate fi rotit cu ușurință pe țeavă după instalare pentru utilizare în spații înguste. UȘOR DE UTILIZAT: conectorul drept are un design inovator push-to-connect care permite o instalare rapidă și ușoară; nu sunt necesare unelte, lipire, sertizare sau lipici. MONTAJ TAȚĂ DE ALAMA: Racordul tată poate fi utilizat pentru a conecta la orice combinație de țevi de cupru, PEX, CPVC sau PE-RT; poate fi folosit pentru linii umede.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Scrie o recenzie

E-mailul dvs. nu va fi publicat. Toate câmpurile obligatorii sunt marcate cu*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Produse asemanatoare

Descoperiți rețeaua noastră internațională

Expediem în 28 de țări, peste 200.000 de produse. Fii la curent, abonează-te la newsletter.

Array